From 1879b3f0f3c276bcd65b26b3d3600ddf1cd5334f Mon Sep 17 00:00:00 2001
From: patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3>
Date: Sun, 11 Apr 2010 19:44:36 +0000
Subject: [PATCH] Prep for 5.3 release
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2589 42af7a65-404d-4744-a932-0658087f49c3
---
ChangeLog | 13 ++--
Documentation/NuttX.html | 112 ++++++++++++++++++---------
Documentation/README.html | 6 +-
README.txt | 4 +
ReleaseNotes | 21 +++++
configs/olimex-lpc2378/src/up_leds.c | 27 ++++---
6 files changed, 126 insertions(+), 57 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index b93a999c84..bcc923a2c5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -42,7 +42,7 @@
Can't do this; the caller must be able to wait for access
to memory.
* Fixed bugs associated with debug output:
- Cannot do dbg() in middle of context switch logic.
+ Cannot do dbg() in middle of context switch logic.
because it may require use of semaphores and cause
additional context switches. lldbg() is safe.
* Interrupt must be disabled throughout all context switches.
@@ -51,8 +51,8 @@
serial.h defines the interface.
* Fixed mq_receive() and mq_send() -- bad memcpy()
* Fixed C5471 signal deliver logic: use of dbg() and
- other actions by use signal handler can alter errno.
- need to protect errno during signal handling.
+ other actions by use signal handler can alter errno.
+ need to protect errno during signal handling.
* Fixed uninitialized variable in filesystem that could
cause various problems
* Added a test for roundrobin scheduler.
@@ -1068,7 +1068,7 @@
* configs/ea3131/nsh - Added a NuttShell (NSH) configuration for the
EA3131.
-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+5.3 2010-04-11 Gregory Nutt <spudmonkey@racsa.co.cr>
* arch/arm/src/lpc313x/lpc313x_usbdev.c - USB driver for the LPC313x
contributed by David Hewson.
@@ -1078,9 +1078,8 @@
* Several important compilation error fixes in lpc313x and (dualspeed) USB
code also contributed by David Hewson.
* arch/arm/src/sam3u/sam3u_dmac.c - DMA support for the AT90SAM3U.
- (untested on initial checkin).
* arch/arm/src/sam3u/sam3u_hsmci.c - SD memory card support for AT90SAM3U
- (incomplete on initial checkin).
+ (Neither the DMA nor the HSMCI driver are functional on the initial checkin).
* drivers/usbdev - Several important fixes to the USB mass storage driver
submitted by David Hewson.
* configs/olimex-lpc2378, arch/arm/include/lpc2378, and arch/arm/src/lpc2378 -
@@ -1089,3 +1088,5 @@
* arch/arm/src/sam3u/sam3u_internal.h - Fixed a critical bug in the AT91SAM3U
PIO decoding. No PIOs greater than 15 could be used on any port! Obviously,
no one has been using this port.
+
+5.4 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
diff --git a/Documentation/NuttX.html b/Documentation/NuttX.html
index 203ae6e888..8dd0eaa498 100644
--- a/Documentation/NuttX.html
+++ b/Documentation/NuttX.html
@@ -729,31 +729,37 @@
</tr>
</table>
-<p><b>nuttx-5.2 Release Notes</b>:
+<p><b>nuttx-5.3 Release Notes</b>:
<p>
- This 49<sup>th</sup> release of NuttX was made on March 18, 2010 and is available for download from the
+ This 50<sup>th</sup> release of NuttX was made on April 11, 2010 and is available for download from the
<a href="http://sourceforge.net/project/showfiles.php?group_id=189573">SourceForge</a> website.
The change log associated with the release is available <a href="#currentrelease">here</a>.
Unreleased changes after this release are available in CVS.
These unreleased changes are listed <a href="#pendingchanges">here</a>.
</p>
<p>
- This release completes the verification of the basic port for the NXP
- <a href="http://ics.nxp.com/products/lpc3000/lpc313x.lpc314x.lpc315x/">LPC3131</a> MCU
- on the <a href="http://www.embeddedartists.com/products/kits/lpc3131_kit.php">Embedded Artists EA3131</a> board.
- This basic port includes basic boot-up, serial console, and timer interrupts. This port
- has been verified on the using the NuttX OS test and includes a working
- implementation of the NuttShell (NSH).
+ This release suport for one new achitecture:
</p>
+<ul>
+ <li>A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378 development board was contributed by Rommel Marcelo.</li>
+</ul>
<p>
- An extended release will follow and should include SDIO-based SD card
- support and device USB.
+ And extensions to two existing architures:
</p>
+<ul>
+ <li>David Hewson contributed a dual-speed (full/high) USB device-side driver
+ for the NXP LPC3131 on the Embedded Artists EA3131 development board.</li>
+ <li>A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U are
+ included (but not fully tested in this release).</li>
+</ul>
<p>
- A few additional features and bugfixes of a minor nature were also incorporated
- as detailed in the <a href="#currentrelease">ChangeLog</a>.
+ Two important bugfix was also included:
</p>
+<ul>
+ <li>An important fix to the USB mass storage driver was contributed by David Hewson.</li>
+ <li>A serious error in the AT91SAM3U PIO handling was fixed.</li>
+</ul>
<table width ="100%">
<tr bgcolor="#e4e4e4">
@@ -845,6 +851,34 @@
<td><br></td>
<td><hr></td>
</tr>
+<tr>
+ <td><br></td>
+ <td>
+ <p>
+ <b>NXP LPC2378</b>.
+ Support is provided for the NXP LPC2378 MCU. In particular,
+ support is provided for the Olimex-LPC2378 development board.
+ This port was contributed by Rommel Marcelo is was first released in NuttX-5.3.
+ This port also used the GNU arm-elf toolchain* under Linux or Cygwin.
+ </p>
+ <ul>
+ <p>
+ <b>STATUS:</b>
+ This port boots and passes the OS test (examples/ostest) and includes a
+ working includes a working implementation of the NuttShell (<a href="NuttShell.html">(NSH)</a>).
+ The port is complete and verified.
+ As of NuttX 5.3, the port includes only basic timer interrupts and serial console support.
+ </p>
+ <p>
+ <b>Development Environments:</b> (Same as for the NXP LPC214x).
+ </p>
+ </ul>
+ </td>
+</tr>
+<tr>
+ <td><br></td>
+ <td><hr></td>
+</tr>
<tr>
<td><br></td>
<td>
@@ -934,8 +968,8 @@
<td><br></td>
<td>
<b>NXP <a href="http://ics.nxp.com/products/lpc3000/lpc313x.lpc314x.lpc315x/">LPC3131</a></b>.
- The basic port for the NXP LPC3131 on the <a href="http://www.embeddedartists.com/products/kits/lpc3131_kit.php">Embedded Artists EA3131</a>
- development board was released in NuttX-5.1 with a GNU arm-elf or arm-eabi toolchain* under Linux or Cygwin
+ The port for the NXP LPC3131 on the <a href="http://www.embeddedartists.com/products/kits/lpc3131_kit.php">Embedded Artists EA3131</a>
+ development board was first released in NuttX-5.1 with a GNU arm-elf or arm-eabi toolchain* under Linux or Cygwin
(but was not functional until NuttX-5.2).
</p>
<ul>
@@ -943,10 +977,10 @@
<b>STATUS:</b>
The basic EA3131 port is complete and verified in NuttX-5.2
This basic port includes basic boot-up, serial console, and timer interrupts.
- This port has been verified on the using the NuttX OS test and includes a working
- implementation of the NuttShell (NSH).
- An extended release will follow and should include SDIO-based SD card
- support and device USB.
+ This port was extended in NuttX 5.3 with a USB high speed driver contributed by David Hewson.
+ This port has been verified on the using the NuttX OS test, USB serial and mass storage
+ tests and includes a working implementation of the NuttShell (<a href="NuttShell.html">(NSH)</a>).
+ An extended release will follow and should include SDIO-based SD card support.
</p>
</ul>
</td>
@@ -1606,21 +1640,26 @@ Other memory:
</table>
<ul><pre>
-nuttx-5.2 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
-
- * arch/arm/src/sam3u/sam3u_pio.c - Fix an address calculation error
- that caused ports B & C to get mapped to the PIOA base address.
- This is an important bugfix! (a patch is available)
- * arch/arm/src/lpc313x/lpc313x_boot.c - Fix an error in the vector
- initialization was causing a memory fault.
- * lib/lib_strtod.c - Add strtod()
- * lpc3131/ea3131 - Several bring fixes submitted by David Hewson. The
- lpc3131 is almost there! Thanks David!
- * arch/arm/src/arm/up_head.S - Corrected backward conditional compilation
- that selects if vectors are located at 0x0000:0000 or 0xffff:f000.
- This fixes the last show stopper bug in the lpc313x bring-up.
- * configs/ea3131/nsh - Added a NuttShell (NSH) configuration for the
- EA3131.
+nuttx-5.3 2010-04-11 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+ * arch/arm/src/lpc313x/lpc313x_usbdev.c - USB driver for the LPC313x
+ contributed by David Hewson.
+ * configs/ea3131/src/up_ubstrgc.c, configs/ea3131/usbserial,
+ configs/ea3131/usbstorage - USB storage and USB serial example support
+ contributed by David Hewson.
+ * Several important compilation error fixes in lpc313x and (dualspeed) USB
+ code also contributed by David Hewson.
+ * arch/arm/src/sam3u/sam3u_dmac.c - DMA support for the AT90SAM3U.
+ * arch/arm/src/sam3u/sam3u_hsmci.c - SD memory card support for AT90SAM3U
+ (Neither the DMA nor the HSMCI driver are functional on the initial checkin).
+ * drivers/usbdev - Several important fixes to the USB mass storage driver
+ submitted by David Hewson.
+ * configs/olimex-lpc2378, arch/arm/include/lpc2378, and arch/arm/src/lpc2378 -
+ Basic port of the NXP 2378 on the Olimex board contributed by
+ Rommel Marcelo.
+ * arch/arm/src/sam3u/sam3u_internal.h - Fixed a critical bug in the AT91SAM3U
+ PIO decoding. No PIOs greater than 15 could be used on any port! Obviously,
+ no one has been using this port.
pascal-2.0 2010-12-21 Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -1650,7 +1689,7 @@ buildroot-1.8 2009-12-21 <spudmonkey@racsa.co.cr>
</table>
<ul><pre>
-nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+nuttx-5.3 2010-04-11 Gregory Nutt <spudmonkey@racsa.co.cr>
* arch/arm/src/lpc313x/lpc313x_usbdev.c - USB driver for the LPC313x
contributed by David Hewson.
@@ -1660,9 +1699,8 @@ nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
* Several important compilation error fixes in lpc313x and (dualspeed) USB
code also contributed by David Hewson.
* arch/arm/src/sam3u/sam3u_dmac.c - DMA support for the AT90SAM3U.
- (untested on initial checkin).
* arch/arm/src/sam3u/sam3u_hsmci.c - SD memory card support for AT90SAM3U
- (incomplete on initial checkin).
+ (Neither the DMA nor the HSMCI driver are functional on the initial checkin).
* drivers/usbdev - Several important fixes to the USB mass storage driver
submitted by David Hewson.
* configs/olimex-lpc2378, arch/arm/include/lpc2378, and arch/arm/src/lpc2378 -
@@ -1672,6 +1710,8 @@ nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
PIO decoding. No PIOs greater than 15 could be used on any port! Obviously,
no one has been using this port.
+nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+
pascal-2.1 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
buildroot-1.9 2010-xx-xx <spudmonkey@racsa.co.cr>
diff --git a/Documentation/README.html b/Documentation/README.html
index 20df92f9cf..686ed824b4 100755
--- a/Documentation/README.html
+++ b/Documentation/README.html
@@ -9,7 +9,7 @@
<tr align="center" bgcolor="#e4e4e4">
<td>
<h1><big><font color="#3c34ec"><i>NuttX README Files</i></font></big></h1>
- <p>Last Updated: January 21, 2009</p>
+ <p>Last Updated: Aprill 11, 2009</p>
</td>
</tr>
</table>
@@ -86,6 +86,10 @@
| | |- <a href="configs/olimex-strp711/include/README.txt">include/README.txt</a>
| | |- <a href="configs/olimex-strp711/src/README.txt">src/README.txt</a>
| | `- <a href="configs/olimex-strp711/README.txt"><b><i>README.txt</i></b></a>
+ | |- olimex-lpc2378/
+ | | |- <a href="configs/olimex-lpc2378/include/README.txt">include/README.txt</a>
+ | | |- <a href="configs/olimex-lpc2378/src/README.txt">src/README.txt</a>
+ | | `- <a href="configs/olimex-lpc2378/README.txt"><b><i>README.txt</i></b></a>
| |- pjrc-8051/
| | |- <a href="configs/pjrc-8051/include/README.txt">include/README.txt</a>
| | |- <a href="configs/pjrc-8051/src/README.txt">src/README.txt</a>
diff --git a/README.txt b/README.txt
index 50239a89c4..3222bad923 100755
--- a/README.txt
+++ b/README.txt
@@ -177,6 +177,10 @@ Below is a guide to the available README files in the NuttX source tree:
| | |- include/README.txt
| | |- src/README.txt
| | `- README.txt
+ | |- olimex-lpc2378/
+ | | |- include/README.txt
+ | | |- src/README.txt
+ | | `- README.txt
| |- pjrc-8051/
| | |- include/README.txt
| | |- src/README.txt
diff --git a/ReleaseNotes b/ReleaseNotes
index 1b676103fd..0b329f1012 100644
--- a/ReleaseNotes
+++ b/ReleaseNotes
@@ -1178,3 +1178,24 @@ implementation of the NuttShell (NSH).
An extended release will follow and should include SDIO-based SD card
support and device USB.
+
+nuttx-5.3
+^^^^^^^^^
+
+This is the 50th release of NuttX. This release suport for one new achitecture:
+
+ * A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378 development board
+ was contributed by Rommel Marcelo.
+
+And extensions to two existing architures:
+
+ * David Hewson contributed a dual-speed (full/high) USB device-side driver
+ for the NXP LPC3131 on the Embedded Artists EA3131 development board.
+ * A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U are
+ included (but not fully tested in this release).
+
+Two important bugfix was also included:
+
+ * An important fix to the USB mass storage driver was contributed by
+ David Hewson.
+ * A serious error in the AT91SAM3U PIO handling was fixed.
diff --git a/configs/olimex-lpc2378/src/up_leds.c b/configs/olimex-lpc2378/src/up_leds.c
index feaaf44555..e360eb5cd1 100755
--- a/configs/olimex-lpc2378/src/up_leds.c
+++ b/configs/olimex-lpc2378/src/up_leds.c
@@ -48,11 +48,12 @@
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
-//~ #define LPC23XX_FIO_BASE 0x3fffc000 /* Fast I/O 0 base address */
+//~ #define LPC23XX_FIO_BASE 0x3fffc000 /* Fast I/O 0 base address */
/****************************************************************************
* Definitions
****************************************************************************/
+
/* P3.0 : P0.7 PINSEL6 LEDS 1-8 */
#define LEDBIT(led) (0x01 << (led))
#define ALL_LEDS (0xFF)
@@ -76,7 +77,6 @@
//~ # define LED_DIR_OFFSET LPC23XX_GPIO_DIR_OFFSET
//~ #endif
-
/****************************************************************************
* Private Data
****************************************************************************/
@@ -97,9 +97,10 @@
void up_ledinit(void)
{
/* Initilize GIOs P1.16-P1.23 */
- putled8(ALL_LEDS,LED_DIR_OFFSET);
- putled8(ALL_LEDS,LED_CLR_OFFSET);
- putled8(LEDBIT(0),LED_SET_OFFSET);
+
+ putled8(ALL_LEDS, LED_DIR_OFFSET);
+ putled8(ALL_LEDS, LED_CLR_OFFSET);
+ putled8(LEDBIT(0), LED_SET_OFFSET);
}
/****************************************************************************
@@ -108,8 +109,8 @@ void up_ledinit(void)
void up_ledon(int led)
{
- putled8(~(LEDBIT(led)),LED_MASK_OFFSET);
- putled8(LEDBIT(led),LED_SET_OFFSET);
+ putled8(~(LEDBIT(led)), LED_MASK_OFFSET);
+ putled8(LEDBIT(led), LED_SET_OFFSET);
}
/****************************************************************************
@@ -118,7 +119,7 @@ void up_ledon(int led)
void up_ledoff(int led)
{
- putled8(LEDBIT(led),LED_CLR_OFFSET);
+ putled8(LEDBIT(led), LED_CLR_OFFSET);
}
/****************************************************************************
@@ -127,16 +128,14 @@ void up_ledoff(int led)
void up_statledoff(void)
{
- putled8(~STATLED, FIO1MASK2_OFFSET);
- putled8(STATLED, FIO1CLR2_OFFSET);
+ putled8(~STATLED, FIO1MASK2_OFFSET);
+ putled8(STATLED, FIO1CLR2_OFFSET);
}
void up_statledon(void)
{
- putled8(~STATLED, FIO1MASK2_OFFSET);
- putled8(STATLED, FIO1SET2_OFFSET);
+ putled8(~STATLED, FIO1MASK2_OFFSET);
+ putled8(STATLED, FIO1SET2_OFFSET);
}
#endif /* CONFIG_ARCH_LEDS */
-
-
--
GitLab