From 2ae1a0c1d63802e27248736756dbff58ba4be50b Mon Sep 17 00:00:00 2001
From: patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3>
Date: Sat, 1 Aug 2009 23:17:52 +0000
Subject: [PATCH] Add THTTPD configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2002 42af7a65-404d-4744-a932-0658087f49c3
---
configs/ntosd-dm320/thttpd/Make.defs | 134 +++++
configs/ntosd-dm320/thttpd/defconfig | 738 +++++++++++++++++++++++++++
configs/ntosd-dm320/thttpd/ld.script | 84 +++
configs/ntosd-dm320/thttpd/setenv.sh | 46 ++
4 files changed, 1002 insertions(+)
create mode 100644 configs/ntosd-dm320/thttpd/Make.defs
create mode 100644 configs/ntosd-dm320/thttpd/defconfig
create mode 100644 configs/ntosd-dm320/thttpd/ld.script
create mode 100755 configs/ntosd-dm320/thttpd/setenv.sh
diff --git a/configs/ntosd-dm320/thttpd/Make.defs b/configs/ntosd-dm320/thttpd/Make.defs
new file mode 100644
index 0000000000..983f9c362f
--- /dev/null
+++ b/configs/ntosd-dm320/thttpd/Make.defs
@@ -0,0 +1,134 @@
+############################################################################
+# configs/ntosd-dm320/thttpd/Make.defs
+#
+# Copyright (C) 2009 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+CROSSDEV = arm-elf-
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+MKNXFLAT = mknxflat
+LDNXFLAT = ldnxflat
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = -Os -fno-strict-aliasing -fno-strength-reduce \
+ -fomit-frame-pointer
+endif
+
+ifeq ($(ARCHCCMAJOR),4)
+ ARCHCPUFLAGS = -mtune=arm9tdmi -march=armv5te -mfloat-abi=soft -fno-builtin
+else
+ ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/thttpd/ld.script
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
+ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
+ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \
+ -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld \
+ -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifeq ("${CONFIG_DEBUG}","y")
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+MKDEP = $(TOPDIR)/tools/mkdeps.sh
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/ntosd-dm320/thttpd/defconfig b/configs/ntosd-dm320/thttpd/defconfig
new file mode 100644
index 0000000000..8ccf8f9c4c
--- /dev/null
+++ b/configs/ntosd-dm320/thttpd/defconfig
@@ -0,0 +1,738 @@
+############################################################################
+# configs/ntosd-dm320/thttpd/defconfig
+#
+# Copyright (C) 2009 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_ARM926EJS=y
+CONFIG_ARCH_CHIP=dm320
+CONFIG_ARCH_CHIP_DM320=y
+CONFIG_ARCH_BOARD=ntosd-dm320
+CONFIG_ARCH_BOARD_NTOSD_DM320=y
+CONFIG_BOARD_LOOPSPERMSEC=16945
+CONFIG_DRAM_SIZE=0x01000000
+CONFIG_DRAM_START=0x01000000
+CONFIG_DRAM_VSTART=0x00000000
+CONFIG_DRAM_NUTTXENTRY=0x01008000
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_STACKDUMP=n
+
+#
+# DM320 specific device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART0).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART1_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_EXAMPLE - identifies the subdirectory in examples
+# that will be used in the build
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+# or TICKS_PER_MSEC=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+#
+CONFIG_EXAMPLE=thttpd
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_NET=y
+CONFIG_DEBUG_BINFMT=y
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2009
+CONFIG_START_MONTH=8
+CONFIG_START_DAY=2
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+
+#
+# Settings for NXFLAT
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
+# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
+# CONFIG_DEBUG_BINFMT have to be defined or
+# CONFIG_NXFLAT_DUMPBUFFER does nothing.
+# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
+# is ordered by symbol name
+#
+CONFIG_NXFLAT=y
+CONFIG_NXFLAT_DUMPBUFFER=n
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=n
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve sysem performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=64
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=1024
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=32
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=4
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_PREALLOC_TIMERS=8
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=y
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+CONFIG_NET=y
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=16
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=16
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=y
+CONFIG_NET_MAX_LISTENPORTS=8
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=n
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# DM320 USB Configuration
+#
+# CONFIG_DM320_GIO_USBATTACH
+# GIO that detects USB attach/detach events
+# CONFIG_DM320_GIO_USBDPPULLUP
+# GIO
+# CONFIG_DMA320_USBDEV_DMA
+# Enable DM320-specific DMA support
+CONFIG_DM320_GIO_USBATTACH=6
+CONFIG_DM320_GIO_USBDPPULLUP=17
+CONFIG_DM320_VENDORID=0xd320
+CONFIG_DM320_PRODUCTID=0x3211
+CONFIG_DM320_USBDEV_DMA=n
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+# Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+CONFIG_USBSER=n
+CONFIG_USBSER_EPINTIN=3
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=1
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+# Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+# Select if the media is removable
+CONFIG_USBSTRG=n
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=1
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# THTTPD settings
+# CONFIG_THTTPD_PORT - THTTPD Server port number
+# CONFIG_THTTPD_IPADDR - Server IP address (no host name)
+# CONFIG_THTTPD_SERVER_ADDRESS - SERVER_ADDRESS: response
+# CONFIG_THTTPD_SERVER_SOFTWARE - SERVER_SOFTWARE: response
+# CONFIG_THTTPD_CGI_PATH -
+# CONFIG_THTTPD_CGI_PATTERN - Only CGI programs matching this
+# pattern will be executed. In fact, if this value is not defined
+# then no CGI logic will be built.
+# CONFIG_THTTPD_CGI_PRIORITY - Provides the priority of CGI child tasks
+# CONFIG_THTTPD_CGI_STACKSIZE - Provides the initial stack size of
+# CGI child task (will be overridden by the stack size in the NXFLAT
+# header)
+# CONFIG_THTTPD_CGI_BYTECOUNT - Byte output limit for CGI tasks.
+# CONFIG_THTTPD_CGI_TIMELIMIT - How many seconds to allow CGI programs
+# to run before killing them.
+# CONFIG_THTTPD_CHARSET- The default character set name to use with
+# text MIME types.
+# CONFIG_THTTPD_IOBUFFERSIZE -
+# CONFIG_THTTPD_INDEX_NAMES - A list of index filenames to check. The
+# files are searched for in this order.
+# CONFIG_AUTH_FILE - The file to use for authentication. If this is
+# defined then thttpd checks for this file in the local directory
+# before every fetch. If the file exists then authentication is done,
+# otherwise the fetch proceeds as usual. If you leave this undefined
+# then thttpd will not implement authentication at all and will not
+# check for auth files, which saves a bit of CPU time. A typical
+# value is ".htpasswd"
+# CONFIG_THTTPD_LISTEN_BACKLOG - The listen() backlog queue length.
+# CONFIG_THTTPD_LINGER_MSEC - How many milliseconds to leave a connection
+# open while doing a lingering close.
+# CONFIG_THTTPD_OCCASIONAL_MSEC - How often to run the occasional
+# cleanup job.
+# CONFIG_THTTPD_IDLE_READ_LIMIT_SEC - How many seconds to allow for
+# reading the initial request on a new connection.
+# CONFIG_THTTPD_IDLE_SEND_LIMIT_SEC - How many seconds before an
+# idle connection gets closed.
+# CONFIG_THTTPD_TILDE_MAP1 and CONFIG_THTTPD_TILDE_MAP2 - Tilde mapping.
+# Many URLs use ~username to indicate a user's home directory. thttpd
+# provides two options for mapping this construct to an actual filename.
+# 1) Map ~username to <prefix>/username. This is the recommended choice.
+# Each user gets a subdirectory in the main web tree, and the tilde
+# construct points there. The prefix could be something like "users",
+# or it could be empty.
+# 2) Map ~username to <user's homedir>/<postfix>. The postfix would be
+# the name of a subdirectory off of the user's actual home dir,
+# something like "public_html".
+# You can also leave both options undefined, and thttpd will not do
+# anything special about tildes. Enabling both options is an error.
+# Typical values, if they're defined, are "users" for
+# CONFIG_THTTPD_TILDE_MAP1 and "public_html"forCONFIG_THTTPD_TILDE_MAP2.
+# CONFIG_THTTPD_GENERATE_INDICES
+# CONFIG_THTTPD_URLPATTERN - If defined, then it will be used to match
+# and verify referrers.
+CONFIG_THTTPD_PORT=80
+CONFIG_THTTPD_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_THTTPD_SERVER_ADDRESS="http://www.nuttx.org"
+CONFIG_THTTPD_SERVER_SOFTWARE="thttpd/2.25b 29dec2003-NuttX"
+CONFIG_THTTPD_CGI_PATH="/mnt/www/cgi-bin"
+CONFIG_THTTPD_CGI_PATTERN="/cgi-bin/*"
+CONFIG_THTTPD_CGI_PRIORITY=50
+CONFIG_THTTPD_CGI_STACKSIZE=1024
+CONFIG_THTTPD_CGI_BYTECOUNT=20000
+CONFIG_THTTPD_CGI_TIMELIMIT=0
+CONFIG_THTTPD_CHARSET="iso-8859-1"
+CONFIG_THTTPD_IOBUFFERSIZE=256
+#CONFIG_THTTPD_INDEX_NAMES
+CONFIG_AUTH_FILE=n
+CONFIG_THTTPD_LISTEN_BACKLOG=8
+CONFIG_THTTPD_LINGER_MSEC=500
+CONFIG_THTTPD_OCCASIONAL_MSEC=120
+CONFIG_THTTPD_IDLE_READ_LIMIT_SEC=300
+CONFIG_THTTPD_IDLE_SEND_LIMIT_SEC=300
+CONFIG_THTTPD_TILDE_MAP1=n
+CONFIG_THTTPD_TILDE_MAP2=n
+CONFIG_THTTPD_GENERATE_INDICES=n
+CONFIG_THTTPD_URLPATTERN=n
+
+#
+# Additional settings for examples/thttpd
+#
+CONFIG_EXAMPLE_THTTPD_NOMAC=n
+CONFIG_EXAMPLE_THTTPD_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_THTTPD_NETMASK=(255<<24|255<<16|255<<8|0)
+
+#
+# Settings for examples/uip
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/nsh
+#
+# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
+# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
+# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
+# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
+# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
+# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_EXAMPLES_NSH_TELNET is selected:
+# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
+# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
+# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
+# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
+CONFIG_EXAMPLES_NSH_STRERROR=n
+CONFIG_EXAMPLES_NSH_LINELEN=64
+CONFIG_EXAMPLES_NSH_STACKSIZE=2048
+CONFIG_EXAMPLES_NSH_NESTDEPTH=3
+CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
+CONFIG_EXAMPLES_NSH_DISABLEBG=n
+CONFIG_EXAMPLES_NSH_ROMFSETC=n
+CONFIG_EXAMPLES_NSH_CONSOLE=y
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_ARCHINIT=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_CMD_SIZE=40
+CONFIG_EXAMPLES_NSH_STACKSIZE=4096
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
+CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
+CONFIG_EXAMPLES_NSH_FATDEVNO=1
+CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
+CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
+CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
+
+#
+# DM90x0 Driver Settings
+CONFIG_NET_DM90x0=y
+CONFIG_DM9X_NINTERFACES=1
+CONFIG_DM9X_STATS=n
+CONFIG_DM9X_BASE=0xd0000300
+CONFIG_DM9X_IRQ=27
+CONFIG_DM9X_BUSWIDTH8=n
+CONFIG_DM9X_BUSWIDTH16=y
+CONFIG_DM9X_BUSWIDTH32=n
+CONFIG_DM9X_CHECKSUM=n
+CONFIG_DM9X_ETRANS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=4096
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/configs/ntosd-dm320/thttpd/ld.script b/configs/ntosd-dm320/thttpd/ld.script
new file mode 100644
index 0000000000..7d6755ad51
--- /dev/null
+++ b/configs/ntosd-dm320/thttpd/ld.script
@@ -0,0 +1,84 @@
+/****************************************************************************
+ * configs/ntosd-dm320/thttpd/ld.script
+ *
+ * Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ /* The OS entry point is here */
+
+ . = 0x00008000;
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got) /* Global offset table */
+ _etext = ABSOLUTE(.);
+ }
+
+ _eronly = ABSOLUTE(.); /* See below */
+ . = ALIGN(4096);
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ }
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ }
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/ntosd-dm320/thttpd/setenv.sh b/configs/ntosd-dm320/thttpd/setenv.sh
new file mode 100755
index 0000000000..516766b429
--- /dev/null
+++ b/configs/ntosd-dm320/thttpd/setenv.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+# configs/ntosd-dm320/thttpd/setenv.sh
+#
+# Copyright (C) 2009 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
+
+WD=`pwd`
+export BUILDROOT_BIN=${WD}/../buildroot/build_arm_nofpu/staging_dir/bin
+export PATH=${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
+
+echo "PATH : ${PATH}"
--
GitLab