diff --git a/drivers/usbdev/usbdev_serial.c b/drivers/usbdev/usbdev_serial.c
index 8eae62e24dd65ac42a00d9568b3325e65d069fb6..78afd3279712232d757280540d5735674e06d685 100644
--- a/drivers/usbdev/usbdev_serial.c
+++ b/drivers/usbdev/usbdev_serial.c
@@ -1,7 +1,7 @@
/****************************************************************************
* drivers/usbdev/usbdev_serial.c
*
- * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ * Copyright (C) 2008-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* This logic emulates the Prolific PL2303 serial/USB converter
@@ -318,9 +318,9 @@ static void usbclass_freereq(FAR struct usbdev_ep_s *ep,
static int usbclass_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc);
#ifdef CONFIG_USBDEV_DUALSPEED
-static void usbclass_mkepbulkdesc(const struct up_epdesc *indesc,
- uint16_t mxpacket, struct usb_epdesc_s *outdesc)
-static int16_t usbclass_mkcfgdesc(uint8_t *buf, uint8_t speed);
+static void usbclass_mkepbulkdesc(const struct usb_epdesc *indesc,
+ uint16_t mxpacket, struct usb_epdesc_s *outdesc);
+static int16_t usbclass_mkcfgdesc(uint8_t *buf, uint8_t speed, uint8_t type);
#else
static int16_t usbclass_mkcfgdesc(uint8_t *buf);
#endif
@@ -864,7 +864,7 @@ static int usbclass_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc)
****************************************************************************/
#ifdef CONFIG_USBDEV_DUALSPEED
-static inline void usbclass_mkepbulkdesc(const FAR struct up_epdesc *indesc,
+static inline void usbclass_mkepbulkdesc(const FAR struct usb_epdesc *indesc,
uint16_t mxpacket,
FAR struct usb_epdesc_s *outdesc)
{
@@ -888,14 +888,14 @@ static inline void usbclass_mkepbulkdesc(const FAR struct up_epdesc *indesc,
****************************************************************************/
#ifdef CONFIG_USBDEV_DUALSPEED
-static int16_t usbclass_mkcfgdesc(uint8_t *buf, uint8_t speed)
+static int16_t usbclass_mkcfgdesc(uint8_t *buf, uint8_t speed, uint8_t type)
#else
static int16_t usbclass_mkcfgdesc(uint8_t *buf)
#endif
{
FAR struct usb_cfgdesc_s *cfgdesc = (struct usb_cfgdesc_s*)buf;
#ifdef CONFIG_USBDEV_DUALSPEED
- bool highspeed = (speed == USB_SPEED_HIGH);
+ bool hispeed = (speed == USB_SPEED_HIGH);
uint16_t bulkmxpacket;
#endif
uint16_t totallen;
@@ -1054,7 +1054,7 @@ static int usbclass_setconfig(FAR struct usbser_dev_s *priv, uint8_t config)
/* Configure the IN bulk endpoint */
#ifdef CONFIG_USBDEV_DUALSPEED
- if (dev->speed == USB_SPEED_HIGH)
+ if ((priv->usbdev->speed == USB_SPEED_HIGH)
{
bulkmxpacket = 512;
}
@@ -1610,7 +1610,7 @@ static int usbclass_setup(FAR struct usbdev_s *dev, const struct usb_ctrlreq_s *
case USB_DESC_TYPE_CONFIG:
{
#ifdef CONFIG_USBDEV_DUALSPEED
- ret = usbclass_mkcfgdesc(ctrlreq->buf, dev->speed);
+ ret = usbclass_mkcfgdesc(ctrlreq->buf, dev->speed, ctrl->req);
#else
ret = usbclass_mkcfgdesc(ctrlreq->buf);
#endif
diff --git a/drivers/usbdev/usbdev_storage.c b/drivers/usbdev/usbdev_storage.c
index 3713e8dcfce4a301a040ef854713c63dc1463bb0..031d25e2c85305cc131c4ed947603d2ade49e4b8 100644
--- a/drivers/usbdev/usbdev_storage.c
+++ b/drivers/usbdev/usbdev_storage.c
@@ -1,7 +1,7 @@
/****************************************************************************
* drivers/usbdev/usbdev_storage.c
*
- * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ * Copyright (C) 2008-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Mass storage class device. Bulk-only with SCSI subclass.
@@ -119,7 +119,7 @@ static void usbstrg_freereq(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *req);
static int usbstrg_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc);
#ifdef CONFIG_USBDEV_DUALSPEED
-static int16_t usbstrg_mkcfgdesc(uint8_t *buf, uint8_t speed);
+static int16_t usbstrg_mkcfgdesc(uint8_t *buf, uint8_t speed, uint8_t type);
#else
static int16_t usbstrg_mkcfgdesc(uint8_t *buf);
#endif
@@ -423,14 +423,14 @@ static int usbstrg_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc)
****************************************************************************/
#ifdef CONFIG_USBDEV_DUALSPEED
-static int16_t usbstrg_mkcfgdesc(uint8_t *buf, uint8_t speed)
+static int16_t usbstrg_mkcfgdesc(uint8_t *buf, uint8_t speed, uint8_t type)
#else
static int16_t usbstrg_mkcfgdesc(uint8_t *buf)
#endif
{
FAR struct usb_cfgdesc_s *cfgdesc = (struct usb_cfgdesc_s*)buf;
#ifdef CONFIG_USBDEV_DUALSPEED
- FAR struct usb_epdesc_s *epdesc;
+ FAR const struct usb_epdesc_s *epdesc;
bool hispeed = (speed == USB_SPEED_HIGH);
uint16_t bulkmxpacket;
#endif
@@ -807,7 +807,7 @@ static int usbstrg_setup(FAR struct usbdev_s *dev,
case USB_DESC_TYPE_CONFIG:
{
#ifdef CONFIG_USBDEV_DUALSPEED
- ret = usbstrg_mkcfgdesc(ctrlreq->buf, dev->speed, len);
+ ret = usbstrg_mkcfgdesc(ctrlreq->buf, dev->speed, ctrl->value[1]);
#else
ret = usbstrg_mkcfgdesc(ctrlreq->buf);
#endif
@@ -1089,7 +1089,8 @@ int usbstrg_setconfig(FAR struct usbstrg_dev_s *priv, uint8_t config)
FAR struct usbstrg_req_s *privreq;
FAR struct usbdev_req_s *req;
#ifdef CONFIG_USBDEV_DUALSPEED
- struct usb_epdesc_s *epdesc;
+ FAR const struct usb_epdesc_s *epdesc;
+ bool hispeed = (priv->usbdev->speed == USB_SPEED_HIGH);
uint16_t bulkmxpacket;
#endif
int i;
@@ -1151,7 +1152,7 @@ int usbstrg_setconfig(FAR struct usbstrg_dev_s *priv, uint8_t config)
/* Configure the OUT bulk endpoint */
#ifdef CONFIG_USBDEV_DUALSPEED
- epdesc = USBSTRG_EPBULKINDESC(hispeed);
+ epdesc = USBSTRG_EPBULKOUTDESC(hispeed);
ret = EP_CONFIGURE(priv->epbulkout, epdesc, true);
#else
ret = EP_CONFIGURE(priv->epbulkout, &g_fsepbulkoutdesc, true);
diff --git a/drivers/usbdev/usbdev_storage.h b/drivers/usbdev/usbdev_storage.h
index 9ae25b4a68382665b9da76b95f9123060adade4d..03c07f734d87655541551a3ad61d84561a6916b0 100644
--- a/drivers/usbdev/usbdev_storage.h
+++ b/drivers/usbdev/usbdev_storage.h
@@ -1,7 +1,7 @@
/****************************************************************************
* drivers/usbdev/usbdev_storage.h
*
- * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ * Copyright (C) 2008-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Mass storage class device. Bulk-only with SCSI subclass.
@@ -304,8 +304,8 @@
/* Macros for dual speed vs. full speed only operation */
#ifdef CONFIG_USBDEV_DUALSPEED
-# define USBSTRG_EPBULKINDESC(hs) ((hs) ? (g_hsepbulkindesc) : (g_fsepbulkindesc))
-# define USBSTRG_EPBULKOUTDESC(hs) ((hs) ? (g_hsepbulkoutdesc) : (g_fsepbulkoutdesc))
+# define USBSTRG_EPBULKINDESC(hs) ((hs) ? (&g_hsepbulkindesc) : (&g_fsepbulkindesc))
+# define USBSTRG_EPBULKOUTDESC(hs) ((hs) ? (&g_hsepbulkoutdesc) : (&g_fsepbulkoutdesc))
# define USBSTRG_BULKMAXPACKET(hs) \
((hs) ? USBSTRG_HSBULKMAXPACKET : USBSTRG_FSBULKMAXPACKET)
# define USBSTRG_BULKMXPKTSHIFT(d) \