diff --git a/ChangeLog b/ChangeLog
index accf731ee568c942e7f1f0f2045f4e16dd4f99ef..31c6a09f3fb4cf3fd749f0ca059ab1357b8a39be 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -498,7 +498,7 @@
* Fixed an error in read(); it was not setting the errno on errors returned
from the driver.
-0.3.17 2008-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+0.3.17 2008-10-28 Gregory Nutt <spudmonkey@racsa.co.cr>
* Incorporate patch "[2164503] nuttx-0.3.16 does not build for ARM with USB disabled"
* Reduced the amount of memory reserved for USB serial control requests. It
was unnecessarily large.
@@ -520,6 +520,11 @@
the request queue (M320 driver also fixed, untested)
* Correct another error in the NXP LPC214x USB device driver that caused read failures
when the request buffer size was larger than maxpacket.
+ * Numerous corrections/extensions to the USB tracing logic included in 0.3.16 (but
+ not integrated until 0.3.17)
+ * Fixed another bug in the NXP LPC214x USB device driver: After a stalled endpoint
+ is resumed (view CLEAR FEATURE), we must restart the IN (outgoing) queue.
+0.3.18 2008-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
diff --git a/Documentation/NuttX.html b/Documentation/NuttX.html
index a93e24cff939c76cea10535b10210e7e453b8367..94c6940913f22fd3fd5f121544cd11814dd65990 100644
--- a/Documentation/NuttX.html
+++ b/Documentation/NuttX.html
@@ -8,7 +8,7 @@
<tr align="center" bgcolor="#e4e4e4">
<td>
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
- <p>Last Updated: October 27, 2008</p>
+ <p>Last Updated: October 28, 2008</p>
</td>
</tr>
</table>
@@ -381,6 +381,13 @@
<li>FAT12/16/32 filesystem support.</li>
</p>
</tr>
+<tr>
+ <td><br></td>
+ <td>
+ <p>
+ <li>Generic driver for SPI-based MMC/SD cards.</li>
+ </p>
+</tr>
<tr>
<td><br></td>
<td>
@@ -462,7 +469,7 @@
<td><br></td>
<td>
<p>
- <li>Device-dependent USB class drivers available for USB serial.</li>
+ <li>Device-dependent USB class drivers available for USB serial and for USB mass storage.</li>
</p>
</tr>
<tr>
@@ -523,66 +530,36 @@
</tr>
</table>
-<p><b>nuttx-0.3.16</b>.
- The 28th release of NuttX (nuttx-0.3.16) is available for download
+<p><b>nuttx-0.3.17</b>.
+ The 29th release of NuttX (nuttx-0.3.16) is available for download
from the <a href="http://sourceforge.net/project/showfiles.php?group_id=189573">SourceForge</a>
website.
The change log associated with the release is available <a href="#currentrelease">here</a>.
Unreleased changes after this release are available in CVS.
These unreleased changes are listed <a href="#pendingchanges">here</a>.
</p>
-<p><b>USB Support</b>.
- The nuttx-0.3.16 release includes the first support for USB in NuttX.
- A set of USB APIs were added to support USB device controller drivers and bindings to USB device class drivers.
- The form of the interface was inspired by the Linux Gadget APIs.
-</p>
-<p>
- At present USB device controller drivers are included for:
+<p><b>MMC/SD and USB Mass Storage Support</b>.
+ The nuttx-0.3.17 release includes additional support for USB in NuttX.
+ The following new features were added:
<ul>
- <li>
- The NXP LPC214x. This driver has been verified and is an early alpha stage in quality.
- </li>
- <li>
- TI DM320. Coding for this driver is complete but it is completely untested as of this release.
- </li>
+ <li>Added support for SPI-based MMC/SD cards (with an SPI driver for the NXP LPC214x).</li>
+ <li>Added USB storage class device side driver (BBB)</li>
+ <li>Added an example that demonstrates the USB storage class by exporting the SPI based MMC/SD card on the NXP LPC214x.</li>
</ul>
</p>
<p>
- A controller-independent class driver is also included for:
- <ul>
- <li>
- USB serial class device driver (emulates the Prolific PL2303 serial-to-USB adaptor).
- This drver has only been verified with the Linux host PL2303 driver.
- </li>
- </ul>
+ This is an early alpha release of these drivers.
+ At present they only work with debug features enabled so there are probably some race conditions that
+ occur only with debug features disabled (anyone out there with a USB analyzer? I would love
+ to know what is happening).
</p>
-<p><b>Other New Features</b>.
- Other new features include:
- <ul>
- <li>
- Add an option to set aside a separate stack for interrupt handling (ARM only).
- This is useful when memory is constrained, there are multiple tasks, and
- the interrupt stack requirement is high (as when USB is enabled).
- </li>
- </ul>
-</p>
-<p><b>Bugs Fixed</b>.
- A few bugs were also fixed:
- <ul>
- <li>
- Fixed the frequency of system timer interrupts in the NXP LPC214x port
- (off by 20x in nuttx-0.3.15)
- </li>
- <li>
- Fixed serial driver bugs related to (1) open counts and (2) recognizing
- O_NONBLOCK on read.
- <li>
- Fixed an error in read(); it was not setting the <code>errno</code> on errors returned
- from the driver.
- </li>
- </ul>
+<p><b>Bugs Fixed</b>
+ Several important bugs were also fixed in the FAT file system, USB serial driver and
+ NXP LPC214x USB controller driver (see the current <a href="#currentrelease">ChangeLog</a> for details).
</p>
<p>
+ These changes were verified only on the mcu123.com NXP LPC2148 board using a Linux development environment.
+ USB testing was performed using both a Linux host and a WinXP host.
As usual, any feedback about bugs or suggestions for improvement would be greatly appreciated.
</p>
@@ -1085,24 +1062,32 @@ Other memory:
</table>
<pre><ul>
-nuttx-0.3.16 2008-10-10 Gregory Nutt <spudmonkey@racsa.co.cr>
- * Added header files defining a common USB device controller architecture
- * Added USB device side driver for the LPC214x
- * Correct the frequency of system timer interrupts in the NXP LPC214x port
- (off by 20x in nuttx-0.3.15)
- * Add an option to set aside a separate stack for interrupt handling (ARM only).
- This is useful when memory is constrained, there are multiple tasks, and
- the interrupt stack requirement is high (as when USB is enabled).
- * Added USB serial class device side driver (emulates Prolific PL2303
- serial-to-USB adaptor)
- * Add LPC214x USB serial configuration; Add examples/usbserial test
- * Added USB device side driver for the DM320 (untested at initial release)
- * Fixed an error in a previous (post 0.3.15) check-in that broke the LPC214x
- system timer.
- * Fixed serial driver bugs related to (1) open counts and (2) recognizing
- O_NONBLOCK on read.
- * Fixed an error in read(); it was not setting the errno on errors returned
- from the driver.
+nuttx-0.3.17 2008-10-28 Gregory Nutt <spudmonkey@racsa.co.cr>
+ * Incorporate patch "[2164503] nuttx-0.3.16 does not build for ARM with USB disabled"
+ * Reduced the amount of memory reserved for USB serial control requests. It
+ was unnecessarily large.
+ * Added LPC214x SPI1 driver to interface with MMC on mcu123.com board.
+ * Added a simple SPI-based MMC/SD block driver
+ * NSH: Add LPC214x-specific support to NSH; NSH now mounts any SD cards in the slot.
+ * FAT: Fix access to unaligned 32-bit values in partion table (start sector & size)
+ * Fixed a problem with a un-initialized variable in the USB serial driver.
+ * Added USB storage NXP LPC214x configuration
+ * Added a test for USB storage under examples/usbstorage
+ * Fixed a bug in the LPC214x USB driver: It was not properly clearing a HALTed
+ endpoints (other than EP) on receipt of CLEAR FEATURES request.
+ * Added USB storage class device side driver (BBB)
+ * Fixed a bug in the LPC214x USB driver: It was not properly handling request buffers
+ larger then the endpoint's max packet (DM320 driver also fixed, untested)
+ * Added logic to the USB device interface: A bit is needed to force the driver to
+ to terminate an IN transfer with a short packet (zero-length if necessary).
+ * Fix an error in the NXP LPC214x USB device driver that was causing corruption of
+ the request queue (M320 driver also fixed, untested)
+ * Correct another error in the NXP LPC214x USB device driver that caused read failures
+ when the request buffer size was larger than maxpacket.
+ * Numerous corrections/extensions to the USB tracing logic included in 0.3.16 (but
+ not integrated until 0.3.17)
+ * Fixed another bug in the NXP LPC214x USB device driver: After a stalled endpoint
+ is resumed (view CLEAR FEATURE), we must restart the IN (outgoing) queue.
pascal-0.1.2 2008-02-10 Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -1128,28 +1113,7 @@ buildroot-0.1.0 2007-03-09 <spudmonkey@racsa.co.cr>
</table>
<pre><ul>
-nuttx-0.3.17 2008-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
- * Incorporate patch "[2164503] nuttx-0.3.16 does not build for ARM with USB disabled"
- * Reduced the amount of memory reserved for USB serial control requests. It
- was unnecessarily large.
- * Added LPC214x SPI1 driver to interface with MMC on mcu123.com board.
- * Added a simple SPI-based MMC/SD block driver
- * NSH: Add LPC214x-specific support to NSH; NSH now mounts any SD cards in the slot.
- * FAT: Fix access to unaligned 32-bit values in partion table (start sector & size)
- * Fixed a problem with a un-initialized variable in the USB serial driver.
- * Added USB storage NXP LPC214x configuration
- * Added a test for USB storage under examples/usbstorage
- * Fixed a bug in the LPC214x USB driver: It was not properly clearing a HALTed
- endpoints (other than EP) on receipt of CLEAR FEATURES request.
- * Added USB storage class device side driver (BBB)
- * Fixed a bug in the LPC214x USB driver: It was not properly handling request buffers
- larger then the endpoint's max packet (DM320 driver also fixed, untested)
- * Added logic to the USB device interface: A bit is needed to force the driver to
- to terminate an IN transfer with a short packet (zero-length if necessary).
- * Fix an error in the NXP LPC214x USB device driver that was causing corruption of
- the request queue (M320 driver also fixed, untested)
- * Correct another error in the NXP LPC214x USB device driver that caused read failures
- when the request buffer size was larger than maxpacket.
+nuttx-0.3.18 2008-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
pascal-0.1.3 2008-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
diff --git a/ReleaseNotes b/ReleaseNotes
index afb62b83724c121dc48fb764416411d1a41a087d..73de15289819e7252678ce8f0c44e8371d738a6b 100644
--- a/ReleaseNotes
+++ b/ReleaseNotes
@@ -650,4 +650,33 @@ diff -u -r1.13 up_internal.h
#endif /* __ASSEMBLY__ */
+nuttx-0.3.17
+^^^^^^^^^^^^
+
+This is the 29th release of NuttX. This release includes the additional support for
+USB in NuttX. The following new features were added:
+
+ * Added support for SPI-based MMC/SD cards (with an SPI driver for the NXP LPC214x).
+ * Added USB storage class device side driver (BBB)
+ * Added an example that demonstrates the USB storage class by exporting the SPI
+ based MMC/SD card on the NXP LPC214x.
+
+This is an early alpha release of these drivers. At present they only work with
+debug features enabled so there are probably some race conditions that occur only
+with debug features disabled (anyone out there with a USB analyzer? I would love
+to know what is happening).
+
+At present USB device controller drivers are included for:
+
+Several important bugs were also fixed in the FAT file system, USB serial driver and
+NXP LPC214x USB controller driver (see the ChangeLog for details).
+
+These changes were verified only on the mcu123.com NXP LPC2148 board using a Linux
+development environment. USB testing was performed using both a Linux host and a WinXP
+host. Please report any errors to me.
+
+This tarball contains a complete CVS snapshot from Octobor 28, 2008.
+
+
+