diff --git a/arch/arm/src/lpc17xx/lpc17_syscon.h b/arch/arm/src/lpc17xx/lpc17_syscon.h new file mode 100755 index 0000000000000000000000000000000000000000..a8e06cf2a0798c1aecb0a50f61d8ca3f8d2dca97 --- /dev/null +++ b/arch/arm/src/lpc17xx/lpc17_syscon.h @@ -0,0 +1,493 @@ +/************************************************************************************ + * arch/arm/src/lpc17xx/lpc17_syscon.h + * + * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_SYSCON_H +#define __ARCH_ARM_SRC_LPC17XX_LPC17_SYSCON_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include "chip.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Register offsets *****************************************************************/ +/* Flash accelerator module */ + +#define LPC17_SYSCON_FLASHCFG_OFFSET 0x0000 /* Flash Accelerator Configuration Register */ + +/* Memory Mapping Control register (MEMMAP - 0x400F C040) */ + +#define LPC17_SYSCON_MEMMAP_OFFSET 0x0040 /* Memory Mapping Control register */ + +/* Clocking and power control - Phase locked loops */ + +#define LPC17_SYSCON_PLL0CON_OFFSET 0x0080 /* PLL0 Control Register */ +#define LPC17_SYSCON_PLL0CFG_OFFSET 0x0084 /* PLL0 Configuration Register */ +#define LPC17_SYSCON_PLL0STAT_OFFSET 0x0088 /* PLL0 Status Register */ +#define LPC17_SYSCON_PLL0FEED_OFFSET 0x008c /* PLL0 Feed Register */ + +#define LPC17_SYSCON_PLL1CON_OFFSET 0x00a0 /* PLL1 Control Register */ +#define LPC17_SYSCON_PLL1CFG_OFFSET 0x00a4 /* PLL1 Configuration Register */ +#define LPC17_SYSCON_PLL1STAT_OFFSET 0x00a8 /* PLL1 Status Register */ +#define LPC17_SYSCON_PLL1FEED_OFFSET 0x00ac /* PLL1 Feed Register */ + +/* Clocking and power control - Peripheral power control registers */ + +#define LPC17_SYSCON_PCON_OFFSET 0x00c0 /* Power Control Register */ +#define LPC17_SYSCON_PCONP_OFFSET 0x00c4 /* Power Control for Peripherals Register */ + +/* Clocking and power control -- Clock dividers */ + +#define LPC17_SYSCON_CCLKCFG_OFFSET 0x0104 /* CPU Clock Configuration Register */ +#define LPC17_SYSCON_USBCLKCFG_OFFSET 0x0108 /* USB Clock Configuration Register */ + +/* 0x400f c110 - 0x400f c114: CAN Wake and Sleep Registers */ + +/* Clocking and power control -- Clock source selection */ + +#define LPC17_SYSCON_CLKSRCSEL_OFFSET 0x010c /* Clock Source Select Register */ + +/* System control registers -- External Interrupts */ + +#define LPC17_SYSCON_EXTINT_OFFSET 0x140 /* External Interrupt Flag Register */ + +#define LPC17_SYSCON_EXTMODE_OFFSET 0x148 /* External Interrupt Mode register */ +#define LPC17_SYSCON_EXTPOLAR_OFFSET 0x14c /* External Interrupt Polarity Register */ + +/* System control registers -- Reset */ + +#define LPC17_SYSCON_RSID_OFFSET 0x180 /* Reset Source Identification Register */ + +/* System control registers -- Syscon Miscellaneous Registers */ + +#define LPC17_SYSCON_SCS_OFFSET 0x1a0 /* System Control and Status */ + +/* More clocking and power control -- Clock dividers */ + +#define LPC17_SYSCON_PCLKSEL0_OFFSET 0x01a8 /* Peripheral Clock Selection register 0 */ +#define LPC17_SYSCON_PCLKSEL1_OFFSET 0x01ac /* Peripheral Clock Selection register 1 */ + +/* Device Interrupt Registers (Might be a error in the User Manual, might be at 0x5000c1c0) */ + +#define LPC17_SYSCON_USBINTST_OFFSET 0x01c0 /* USB Interrupt Status */ + +/* DMA Request Select Register */ + +#define LPC17_SYSCON_DMAREQSEL_OFFSET 0x01c4 /* Selects between UART and timer DMA requests */ + +/* More clocking and power control -- Utility */ + +#define LPC17_SYSCON_CLKOUTCFG_OFFSET 0x01c8 /* Clock Output Configuration Register */ + +/* Register addresses ***************************************************************/ +/* Flash accelerator module */ + +#define LPC17_SYSCON_FLASHCFG (LPC17_SYSCON_BASE+LPC17_SYSCON_FLASHCFG_OFFSET) + +/* Memory Mapping Control register (MEMMAP - 0x400F C040) */ + +#define LPC17_SYSCON_MEMMAP (LPC17_SYSCON_BASE+LPC17_SYSCON_MEMMAP_OFFSET) + +/* Clocking and power control - Phase locked loops */ + +#define LPC17_SYSCON_PLL0CON (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL0CON_OFFSET) +#define LPC17_SYSCON_PLL0CFG (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL0CFG_OFFSET) +#define LPC17_SYSCON_PLL0STAT (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL0STAT_OFFSET) +#define LPC17_SYSCON_PLL0FEED (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL0FEED_OFFSET) + +#define LPC17_SYSCON_PLL1CON (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL1CON_OFFSET) +#define LPC17_SYSCON_PLL1CFG (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL1CFG_OFFSET) +#define LPC17_SYSCON_PLL1STAT (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL1STAT_OFFSET) +#define LPC17_SYSCON_PLL1FEED (LPC17_SYSCON_BASE+LPC17_SYSCON_PLL1FEED_OFFSET) + +/* Clocking and power control - Peripheral power control registers */ + +#define LPC17_SYSCON_PCON (LPC17_SYSCON_BASE+LPC17_SYSCON_PCON_OFFSET) +#define LPC17_SYSCON_PCONP (LPC17_SYSCON_BASE+LPC17_SYSCON_PCONP_OFFSET) + +/* Clocking and power control -- Clock dividers */ + +#define LPC17_SYSCON_CCLKCFG (LPC17_SYSCON_BASE+LPC17_SYSCON_CCLKCFG_OFFSET) +#define LPC17_SYSCON_USBCLKCFG (LPC17_SYSCON_BASE+LPC17_SYSCON_USBCLKCFG_OFFSET) + +/* 0x400f c110 - 0x400f c114: CAN Wake and Sleep Registers */ + +/* Clocking and power control -- Clock source selection */ + +#define LPC17_SYSCON_CLKSRCSEL (LPC17_SYSCON_BASE+LPC17_SYSCON_CLKSRCSEL_OFFSET) + +/* System control registers -- External Interrupts */ + +#define LPC17_SYSCON_EXTINT (LPC17_SYSCON_BASE+LPC17_SYSCON_EXTINT_OFFSET) + +#define LPC17_SYSCON_EXTMODE (LPC17_SYSCON_BASE+LPC17_SYSCON_EXTMODE_OFFSET) +#define LPC17_SYSCON_EXTPOLAR (LPC17_SYSCON_BASE+LPC17_SYSCON_EXTPOLAR_OFFSET) + +/* System control registers -- Reset */ + +#define LPC17_SYSCON_RSID (LPC17_SYSCON_BASE+LPC17_SYSCON_RSID_OFFSET) + +/* System control registers -- Syscon Miscellaneous Registers */ + +#define LPC17_SYSCON_SCS (LPC17_SYSCON_BASE+LPC17_SYSCON_SCS_OFFSET) + +/* More clocking and power control -- Clock dividers */ + +#define LPC17_SYSCON_PCLKSEL0 (LPC17_SYSCON_BASE+LPC17_SYSCON_PCLKSEL0_OFFSET) +#define LPC17_SYSCON_PCLKSEL1 (LPC17_SYSCON_BASE+LPC17_SYSCON_PCLKSEL1_OFFSET) + +/* Device Interrupt Registers (Might be a error in the User Manual, might be at 0x5000c1c0) */ + +#define LPC17_SYSCON_USBINTST (LPC17_SYSCON_BASE+LPC17_SYSCON_USBINTST_OFFSET) + +/* DMA Request Select Register */ + +#define LPC17_SYSCON_DMAREQSEL (LPC17_SYSCON_BASE+LPC17_SYSCON_DMAREQSEL_OFFSET) + +/* More clocking and power control -- Utility */ + +#define LPC17_SYSCON_CLKOUTCFG (LPC17_SYSCON_BASE+LPC17_SYSCON_CLKOUTCFG_OFFSET) + +/* Regiser bit definitions **********************************************************/ +/* Flash accelerator module */ + /* Bits 0-11: Reserved */ +#define SYSCON_FLASHCFG_TIM_SHIFT (12) /* Bits 12-15: FLASHTIM Flash access time */ +#define SYSCON_FLASHCFG_TIM_MASK (15 << SYSCON_FLASHCFG_TIM_SHIFT) +# define SYSCON_FLASHCFG_TIM_1 (0 << SYSCON_FLASHCFG_TIM_SHIFT) /* 1 CPU clock <= 20 MHz CPU clock */ +# define SYSCON_FLASHCFG_TIM_2 (1 << SYSCON_FLASHCFG_TIM_SHIFT) /* 2 CPU clock <= 40 MHz CPU clock */ +# define SYSCON_FLASHCFG_TIM_3 (2 << SYSCON_FLASHCFG_TIM_SHIFT) /* 3 CPU clock <= 60 MHz CPU clock */ +# define SYSCON_FLASHCFG_TIM_4 (3 << SYSCON_FLASHCFG_TIM_SHIFT) /* 4 CPU clock <= 80 MHz CPU clock */ +# define SYSCON_FLASHCFG_TIM_5 (4 << SYSCON_FLASHCFG_TIM_SHIFT) /* 5 CPU clock <= 100 MHz CPU clock + * (Up to 120 Mhz for LPC1759/69 only */ +# define SYSCON_FLASHCFG_TIM_6 (5 << SYSCON_FLASHCFG_TIM_SHIFT) /* "safe" setting for any conditions */ + /* Bits 16-31: Reserved */ + +/* Memory Mapping Control register (MEMMAP - 0x400F C040) */ + +#define SYSCON_MEMMAP_MAP (1 << 0) /* Bit 0: + * 0:Boot mode. A portion of the Boot ROM is mapped to address 0. + * 1:User mode. The on-chip Flash memory is mapped to address 0 */ + /* Bits 1-31: Reserved */ + +/* Clocking and power control -- Clock source selection */ + +#define SYSCON_CLKSRCSEL_SHIFT (0) /* Bits 0-1: Clock selection */ +#define SYSCON_CLKSRCSEL_MASK (3 << SYSCON_CLKSRCSEL_SHIFT) +# define SYSCON_CLKSRCSEL_MAIN (0 << SYSCON_CLKSRCSEL_SHIFT) /* PLL0 source = internal RC oscillator */ +# define SYSCON_CLKSRCSEL_RTC (1 << SYSCON_CLKSRCSEL_SHIFT) /* PLL0 source = main oscillator */ +# define SYSCON_CLKSRCSEL_MAIN (2 << SYSCON_CLKSRCSEL_SHIFT) /* PLL0 source = RTC oscillator */ + /* Bits 2-31: Reserved */ + +/* Clocking and power control - Phase locked loops */ +/* PLL0/1 Control register */ + +#define SYSCON_PLLCON_PLLE (1 << 0) /* Bit 0: PLL0/1 Enable */ +#define SYSCON_PLLCON_PLLC (1 << 1) /* Bit 1: PLL0/1 Connect */ + /* Bits 2-31: Reserved */ +/* PLL0 Configuration register */ + +#define SYSCON_PLL0CFG_MSEL_SHIFT (0) /* Bit 0-14: PLL0 Multiplier value */ +#define SYSCON_PLL0CFG_MSEL_MASK (0x7fff << SYSCON_PLL0CFG_MSEL_SHIFT) + /* Bit 15: Reserved */ +#define SYSCON_PLL0CFG_NSEL_SHIFT (16) /* Bit 16-23: PLL0 Pre-Divider value */ +#define SYSCON_PLL0CFG_NSEL_MASK (0xff << SYSCON_PLL0CFG_NSEL_SHIFT) + /* Bits 24-31: Reserved */ +/* PLL1 Configuration register */ + +#define SYSCON_PLL1CFG_MSEL_SHIFT (0) /* Bit 0-4: PLL1 Multiplier value */ +#define SYSCON_PLL1CFG_MSEL_MASK (0x1f < SYSCON_PLL1CFG_MSEL_SHIFT) +#define SYSCON_PLL1CFG_NSEL_SHIFT (5) /* Bit 5-6: PLL1 Pre-Divider value */ +#define SYSCON_PLL1CFG_NSEL_MASK (3 << SYSCON_PLL1CFG_NSEL_SHIFT) + /* Bits 7-31: Reserved */ +/* PLL0 Status register */ + +#define SYSCON_PLL0STAT_MSEL_SHIFT (0) /* Bit 0-14: PLL0 Multiplier value readback */ +#define SYSCON_PLL0STAT_MSEL_MASK (0x7fff << SYSCON_PLL0STAT_MSEL_SHIFT) + /* Bit 15: Reserved */ +#define SYSCON_PLL0STAT_NSEL_SHIFT (16) /* Bit 16-23: PLL0 Pre-Divider value readback */ +#define SYSCON_PLL0STAT_NSEL_MASK (0xff << SYSCON_PLL0STAT_NSEL_SHIFT) +#define SYSCON_PLL0STAT_PLLE (1 << 24) /* Bit 24: PLL0 enable readback */ +#define SYSCON_PLL0STAT_PLLC (1 << 25) /* Bit 25: PLL0 connect readback */ +#define SYSCON_PLL0STAT_PLOCK (1 << 26) /* Bit 26: PLL0 lock status */ + /* Bits 27-31: Reserved */ +/* PLL1 Status register */ + +#define SYSCON_PLL1STAT_MSEL_SHIFT (0) /* Bit 0-4: PLL01Multiplier value readback */ +#define SYSCON_PLL1STAT_MSEL_MASK (0x1f << SYSCON_PLL1STAT_MSEL_SHIFT) +#define SYSCON_PLL1STAT_NSEL_SHIFT (5) /* Bit 5-6: PLL1 Pre-Divider value readback */ +#define SYSCON_PLL1STAT_NSEL_MASK (3 << SYSCON_PLL1STAT_NSEL_SHIFT) + /* Bit 7: Reserved */ +#define SYSCON_PLL1STAT_PLLE (1 << 24) /* Bit 8: PLL1 enable readback */ +#define SYSCON_PLL1STAT_PLLC (1 << 25) /* Bit 9: PLL1 connect readback */ +#define SYSCON_PLL1STAT_PLOCK (1 << 26) /* Bit 10: PLL1 lock status */ + /* Bits 11-31: Reserved */ +/* PLL0/1 Feed register */ + +#define SYSCON_PLLFEED_SHIFT (0) /* Bit 0-7: PLL0/1 feed sequence */ +#define SYSCON_PLLFEED_MASK (0xff << SYSCON_PLLFEED_SHIFT) + /* Bits 8-31: Reserved */ +/* Clocking and power control -- Clock dividers */ +/* CPU Clock Configuration register */ + +#define SYSCON_CCLKCFG_SHIFT (0) /* 0-7: Divide value for CPU clock (CCLK) */ +#define SYSCON_CCLKCFG_MASK (0xff << SYSCON_CCLKCFG_SHIFT) +# define SYSCON_CCLKCFG_DIV(n) ((n-1) << SYSCON_CCLKCFG_SHIFT) /* n=2,3,..255 */ + /* Bits 8-31: Reserved */ +/* USB Clock Configuration register */ + +#define SYSCON_USBCLKCFG_SHIFT (0) /* Bits 0-3: PLL0 divide value USB clock */ +#define SYSCON_USBCLKCFG_MASK (15 << SYSCON_USBCLKCFG_SHIFT) +# define SYSCON_USBCLKCFG_DIV6 (5 << SYSCON_USBCLKCFG_SHIFT) /* PLL0/6 for PLL0=288 MHz */ +# define SYSCON_USBCLKCFG_DIV8 (7 << SYSCON_USBCLKCFG_SHIFT) /* PLL0/8 for PLL0=384 MHz */ +# define SYSCON_USBCLKCFG_DIV10 (9 << SYSCON_USBCLKCFG_SHIFT) /* PLL0/10 for PLL0=480 MHz */ + /* Bits 8-31: Reserved */ +/* Peripheral Clock Selection registers 0 and 1 */ + +#define SYSCON_PCLKSET_CCLK4 (0) /* PCLK_peripheral = CCLK/4 */ +#define SYSCON_PCLKSET_CCLK (1) /* PCLK_peripheral = CCLK */ +#define SYSCON_PCLKSET_CCLK2 (2) /* PCLK_peripheral = CCLK/2 */ +#define SYSCON_PCLKSET_CCLK6 (3) /* PCLK_peripheral = CCLK/8 (except CAN1, CAN2, and CAN) */ +#define SYSCON_PCLKSET_CCLK8 (3) /* PCLK_peripheral = CCLK/6 (CAN1, CAN2, and CAN) */ +#define SYSCON_PCLKSET_MASK (3) + +#define SYSCON_PCLKSEL0_WDT_SHIFT (0) /* Bits 0-1: Peripheral clock WDT */ +#define SYSCON_PCLKSEL0_WDT_MASK (3 << SYSCON_PCLKSEL0_WDT_SHIFT) +#define SYSCON_PCLKSEL0_TMR0_SHIFT (2) /* Bits 2-3: Peripheral clock TIMER0 */ +#define SYSCON_PCLKSEL0_TMR0_MASK (3 << SYSCON_PCLKSEL0_TMR0_SHIFT) +#define SYSCON_PCLKSEL0_TMR1_SHIFT (4) /* Bits 4-5: Peripheral clock TIMER1 */ +#define SYSCON_PCLKSEL0_TMR1_MASK (3 << SYSCON_PCLKSEL0_TMR1_SHIFT) +#define SYSCON_PCLKSEL0_UART0_SHIFT (6) /* Bits 6-7: Peripheral clock UART0 */ +#define SYSCON_PCLKSEL0_UART0_MASK (3 << SYSCON_PCLKSEL0_UART0_MASK) +#define SYSCON_PCLKSEL0_UART1_SHIFT (8) /* Bits 8-9: Peripheral clock UART1 */ +#define SYSCON_PCLKSEL0_UART1_MASK (3 << SYSCON_PCLKSEL0_UART1_SHIFT) + /* Bits 10-11: Reserved */ +#define SYSCON_PCLKSEL0_PWM1_SHIFT (12) /* Bits 12-13: Peripheral clock PWM1 */ +#define SYSCON_PCLKSEL0_PWM1_MASK (3 << SYSCON_PCLKSEL0_PWM1_SHIFT) +#define SYSCON_PCLKSEL0_I2C0_SHIFT (14) /* Bits 14-15: Peripheral clock I2C0 */ +#define SYSCON_PCLKSEL0_I2C0_MASK (3 << SYSCON_PCLKSEL0_I2C0_SHIFT) +#define SYSCON_PCLKSEL0_SPI_SHIFT (16) /* Bits 16-17: Peripheral clock SPI */ +#define SYSCON_PCLKSEL0_SPI_MASK (3 << SYSCON_PCLKSEL0_SPI_SHIFT) + /* Bits 18-19: Reserved */ +#define SYSCON_PCLKSEL0_SSP1_SHIFT (20) /* Bits 20-21: Peripheral clock SSP1 */ +#define SYSCON_PCLKSEL0_SSP1_MASK (3 << SYSCON_PCLKSEL0_SSP1_SHIFT) +#define SYSCON_PCLKSEL0_DAC_SHIFT (22) /* Bits 22-23: Peripheral clock DAC */ +#define SYSCON_PCLKSEL0_DAC_MASK (3 << SYSCON_PCLKSEL0_DAC_SHIFT) +#define SYSCON_PCLKSEL0_ADC_SHIFT (24) /* Bits 24-25: Peripheral clock ADC */ +#define SYSCON_PCLKSEL0_ADC_MASK (3 << SYSCON_PCLKSEL0_ADC_SHIFT) +#define SYSCON_PCLKSEL0_CAN1_SHIFT (26) /* Bits 26-27: Peripheral clock CAN1 */ +#define SYSCON_PCLKSEL0_CAN1_MASK (3 << SYSCON_PCLKSEL0_CAN1_MASK +#define SYSCON_PCLKSEL0_CAN2_SHIFT (28) /* Bits 28-29: Peripheral clock CAN2 */ +#define SYSCON_PCLKSEL0_CAN2_MASK (3 << SYSCON_PCLKSEL0_CAN2_SHIFT) +#define SYSCON_PCLKSEL0_ACF_SHIFT (30) /* Bits 30-31: Peripheral clock CAN AF */ +#define SYSCON_PCLKSEL0_ACF_MASK (3 << SYSCON_PCLKSEL0_ACF_SHIFT) + +#define SYSCON_PCLKSEL1_QEI_SHIFT (0) /* Bits 0-1: Peripheral clock Quadrature Encoder */ +#define SYSCON_PCLKSEL1_QEI_MASK (3 << SYSCON_PCLKSEL1_QEI_SHIFT) +#define SYSCON_PCLKSEL1_GPIOINT_SHIFT (2) /* Bits 2-3: Peripheral clock GPIO interrupts */ +#define SYSCON_PCLKSEL1_GPIOINT_MASK (3 << SYSCON_PCLKSEL1_GPIOINT_SHIFT) +#define SYSCON_PCLKSEL1_PCB_SHIFT (4) /* Bits 4-5: Peripheral clock the Pin Connect block */ +#define SYSCON_PCLKSEL1_PCB_MASK (3 << SYSCON_PCLKSEL1_PCB_SHIFT) +#define SYSCON_PCLKSEL1_I2C1_SHIFT (6) /* Bits 6-7: Peripheral clock I2C1 */ +#define SYSCON_PCLKSEL1_I2C1_MASK (3 << SYSCON_PCLKSEL1_I2C1_SHIFT) + /* Bits 8-9: Reserved */ +#define SYSCON_PCLKSEL1_SSP0_SHIFT (10) /* Bits 10-11: Peripheral clock SSP0 */ +#define SYSCON_PCLKSEL1_SSP0_MASK (3 << SYSCON_PCLKSEL1_SSP0_SHIFT) +#define SYSCON_PCLKSEL1_TMR2_SHIFT (12) /* Bits 12-13: Peripheral clock TIMER2 */ +#define SYSCON_PCLKSEL1_TMR2_MASK (3 << SYSCON_PCLKSEL1_TMR2_SHIFT) +#define SYSCON_PCLKSEL1_TMR3_SHIFT (14) /* Bits 14-15: Peripheral clock TIMER3 */ +#define SYSCON_PCLKSEL1_TMR3_MASK (3 << SYSCON_PCLKSEL1_TMR3_SHIFT) +#define SYSCON_PCLKSEL1_UART2_SHIFT (16) /* Bits 16-17: Peripheral clock UART2 */ +#define SYSCON_PCLKSEL1_UART2_MASK (3 << SYSCON_PCLKSEL1_UART2_SHIFT) +#define SYSCON_PCLKSEL1_UART3_SHIFT (18) /* Bits 18-19: Peripheral clock UART3 */ +#define SYSCON_PCLKSEL1_UART3_MASK (3 << SYSCON_PCLKSEL1_UART3_SHIFT) +#define SYSCON_PCLKSEL1_I2C2_SHIFT (20) /* Bits 20-21: Peripheral clock I2C2 */ +#define SYSCON_PCLKSEL1_I2C2_MASK (3 << SYSCON_PCLKSEL1_I2C2_SHIFT) +#define SYSCON_PCLKSEL1_I2S_SHIFT (22) /* Bits 22-23: Peripheral clock I2S */ +#define SYSCON_PCLKSEL1_I2S_MASK (3 << SYSCON_PCLKSEL1_I2S_SHIFT) + /* Bits 24-25: Reserved */ +#define SYSCON_PCLKSEL1_RIT_SHIFT (26) /* Bits 26-27: Peripheral clock Repetitive Interrupt Timer */ +#define SYSCON_PCLKSEL1_RIT_MASK (3 << SYSCON_PCLKSEL1_RIT_SHIFT) +#define SYSCON_PCLKSEL1_SYSCON_SHIFT (28) /* Bits 28-29: Peripheral clock the System Control block */ +#define SYSCON_PCLKSEL1_SYSCON_MASK (3 << SYSCON_PCLKSEL1_SYSCON_SHIFT) +#define SYSCON_PCLKSEL1_MC_SHIFT (30) /* Bits 30-31: Peripheral clock the Motor Control PWM */ +#define SYSCON_PCLKSEL1_MC_MASK (3 << SYSCON_PCLKSEL1_MC_SHIFT) + +/* Clocking and power control - Peripheral power control registers */ +/* Power Control Register */ + +#define SYSCON_PCON_PM0 (1 << 0) /* Bit 0: Power mode control bit 0 */ +#define SYSCON_PCON_PM1 (1 << 1) /* Bit 1: Power mode control bit 1 */ +#define SYSCON_PCON_BODRPM (1 << 2) /* Bit 2: Brown-Out Reduced Power Mode */ +#define SYSCON_PCON_BOGD (1 << 3) /* Bit 3: Brown-Out Global Disable */ +#define SYSCON_PCON_BORD (1 << 4) /* Bit 4: Brown-Out Reset Disable */ + /* Bits 5-7: Reserved */ +#define SYSCON_PCON_SMFLAG (1 << 8) /* Bit 8: Sleep Mode entry flag */ +#define SYSCON_PCON_DSFLAG (1 << 9) /* Bit 9: Deep Sleep entry flag */ +#define SYSCON_PCON_PDFLAG (1 << 10) /* Bit 10: Power-down entry flag */ +#define SYSCON_PCON_DPDFLAG (1 << 11) /* Bit 11: Deep Power-down entry flag */ + /* Bits 12-31: Reserved */ +/* Power Control for Peripherals Register */ + + /* Bit 0: Reserved */ +#define SYSCON_PCONP_PCTIM0 (1 << 1) /* Bit 1: Timer/Counter 0 power/clock control */ +#define SYSCON_PCONP_PCTIM1 (1 << 2) /* Bit 2: Timer/Counter 1 power/clock control */ +#define SYSCON_PCONP_PCUART0 (1 << 3) /* Bit 3: UART0 power/clock control */ +#define SYSCON_PCONP_PCUART1 (1 << 4) /* Bit 4: UART1 power/clock control */ + /* Bit 5: Reserved */ +#define SYSCON_PCONP_PCPWM1 (1 << 6) /* Bit 6: PWM1 power/clock control */ +#define SYSCON_PCONP_PCI2C0 (1 << 7) /* Bit 7: I2C0 power/clock control */ +#define SYSCON_PCONP_PCSPI (1 << 8) /* Bit 8: SPI power/clock control */ +#define SYSCON_PCONP_PCRTC (1 << 9) /* Bit 9: RTC power/clock control */ +#define SYSCON_PCONP_PCSSP1 (1 << 10) /* Bit 10: SSP 1 power/clock control */ + /* Bit 11: Reserved */ +#define SYSCON_PCONP_PCADC (1 << 12) /* Bit 12: A/D converter (ADC) power/clock control */ +#define SYSCON_PCONP_PCCAN1 (1 << 13) /* Bit 13: CAN Controller 1 power/clock control */ +#define SYSCON_PCONP_PCCAN2 (1 << 14) /* Bit 14: CAN Controller 2 power/clock control */ + /* Bit 15: Reserved */ +#define SYSCON_PCONP_PCRIT (1 << 16) /* Bit 16: Repetitive Interrupt Timer power/clock control */ +#define SYSCON_PCONP_PCMCPWM (1 << 17) /* Bit 17: Motor Control PWM */ +#define SYSCON_PCONP_PCQEI (1 << 18) /* Bit 18: Quadrature Encoder power/clock control */ +#define SYSCON_PCONP_PCI2C1 (1 << 19) /* Bit 19: I2C1 power/clock control */ + /* Bit 20: Reserved */ +#define SYSCON_PCONP_PCSSP0 (1 << 21) /* Bit 21: SSP0 power/clock control */ +#define SYSCON_PCONP_PCTIM2 (1 << 22) /* Bit 22: Timer 2 power/clock control */ +#define SYSCON_PCONP_PCTIM3 (1 << 23) /* Bit 23: Timer 3 power/clock control */ +#define SYSCON_PCONP_PCUART2 (1 << 24) /* Bit 24: UART 2 power/clock control */ +#define SYSCON_PCONP_PCUART3 (1 << 25) /* Bit 25: UART 3 power/clock control */ +#define SYSCON_PCONP_PCI2C2 (1 << 26) /* Bit 26: I2C 2 power/clock control */ +#define SYSCON_PCONP_PCI2S (1 << 27) /* Bit 27: I2S power/clock control */ + /* Bit 28: Reserved */ +#define SYSCON_PCONP_PCGPDMA (1 << 29) /* Bit 29: GPDMA function power/clock control */ +#define SYSCON_PCONP_PCENET (1 << 30) /* Bit 30: Ethernet block power/clock control */ +#define SYSCON_PCONP_PCUSB (1 << 31) /* Bit 31: USB power/clock control */ + +/* More clocking and power control -- Utility */ + +#define SYSCON_CLKOUTCFG_SEL_SHIFT (0) /* Bits 0-3: Selects clock source for CLKOUT */ +#define SYSCON_CLKOUTCFG_SEL_MASK (15 << SYSCON_CLKOUTCFG_SEL_SHIFT) +# define SYSCON_CLKOUTCFG_SEL_CPU (0 << SYSCON_CLKOUTCFG_SEL_SHIFT) /* CLKOUT source=CPU clock */ +# define SYSCON_CLKOUTCFG_SEL_MAIN (1 << SYSCON_CLKOUTCFG_SEL_SHIFT) /* CLKOUT source=main osc */ +# define SYSCON_CLKOUTCFG_SEL_INTRC (2 << SYSCON_CLKOUTCFG_SEL_SHIFT) /* CLKOUT source=internal RC osc */ +# define SYSCON_CLKOUTCFG_SEL_USB (3 << SYSCON_CLKOUTCFG_SEL_SHIFT) /* CLKOUT source=USB clock */ +# define SYSCON_CLKOUTCFG_SEL_RTC (4 << SYSCON_CLKOUTCFG_SEL_SHIFT) /* CLKOUT source=RTC osc */ +#define SYSCON_CLKOUTCFG_DIV_SHIFT (4) /* Bits 4-7: CLKOUT divisor */ +#define SYSCON_CLKOUTCFG_DIV_MASK (15 << SYSCON_CLKOUTCFG_DIV_SHIFT) +# define SYSCON_CLKOUTCFG_DIV(n) ((n-1) << SYSCON_CLKOUTCFG_DIV_SHIFT) /* n=1..16 */ +#define SYSCON_CLKOUTCFG_EN (1 << 8) /* Bit 8: CLKOUT enable control */ +#define SYSCON_CLKOUTCFG_ACT (1 << 9) /* Bit 9: CLKOUT activity indication */ + /* Bits 10-31: Reserved */ +/* System control registers -- External Interrupts */ +/* External Interrupt Flag register */ + +#define SYSCON_EXTINT_EINT0 (1 << 0) /* Bit 0: EINT0 */ +#define SYSCON_EXTINT_EINT1 (1 << 1) /* Bit 1: EINT1 */ +#define SYSCON_EXTINT_EINT2 (1 << 2) /* Bit 2: EINT2 */ +#define SYSCON_EXTINT_EINT3 (1 << 3) /* Bit 3: EINT3 */ + /* Bits 4-31: Reserved */ +/* External Interrupt Mode register */ + +#define SYSCON_EXTMODE_EINT0 (1 << 0) /* Bit 0: 1=EINT0 edge sensitive */ +#define SYSCON_EXTMODE_EINT1 (1 << 1) /* Bit 1: 1=EINT1 edge sensitive */ +#define SYSCON_EXTMODE_EINT2 (1 << 2) /* Bit 2: 1=EINT2 edge sensitive */ +#define SYSCON_EXTMODE_EINT3 (1 << 3) /* Bit 3: 1=EINT3 edge sensitive */ + /* Bits 4-31: Reserved */ +/* External Interrupt Polarity register */ + +#define SYSCON_EXTPOLAR_EINT0 (1 << 0) /* Bit 0: 1=EINT0 high active/rising edge */ +#define SYSCON_EXTPOLAR_EINT1 (1 << 1) /* Bit 1: 1=EINT1 high active/rising edge */ +#define SYSCON_EXTPOLAR_EINT2 (1 << 2) /* Bit 2: 1=EINT2 high active/rising edge */ +#define SYSCON_EXTPOLAR_EINT3 (1 << 3) /* Bit 3: 1=EINT3 high active/rising edge */ + /* Bits 4-31: Reserved */ +/* System control registers -- Reset */ +/* Reset Source Identification Register */ + +#define SYSCON_RSID_POR (1 << 0) /* Bit 0: Power on reset */ +#define SYSCON_RSID_EXTR (1 << 1) /* Bit 1: external RESET signal */ +#define SYSCON_RSID_WDTR (1 << 2) /* Bit 2: Watchdog Timer time out w/WDTRESET */ +#define SYSCON_RSID_BODR (1 << 3) /* Bit 3: Brown out detection */ + /* Bits 4-31: Reserved */ +/* System control registers -- Syscon Miscellaneous Registers */ + + /* Bits 0-3: Reserved */ +#define SYSCON_SCS_OSCRANGE (1 << 4) /* Bit 4: Main oscillator range select */ +#define SYSCON_SCS_OSCEN (1 << 5) /* Bit 5: Main oscillator enable */ +#define SYSCON_SCS_OSCSTAT (1 << 6) /* Bit 6: Main oscillator status */ + /* Bits 7-31: Reserved */ +/* Device Interrupt Registers */ +/* USB Interrupt Status register */ + +#define SYSCON_USBINTST_REQLP (1 << 0) /* Bit 0: Low priority interrupt line status */ +#define SYSCON_USBINTST_REQHP (1 << 1) /* Bit 1: High priority interrupt line status */ +#define SYSCON_USBINTST_REQDMA (1 << 2) /* Bit 2: DMA interrupt line status */ +#define SYSCON_USBINTST_HOSTINT (1 << 3) /* Bit 3: USB host interrupt line status */ +#define SYSCON_USBINTST_ATXINT (1 << 4) /* Bit 4: External ATX interrupt line status */ +#define SYSCON_USBINTST_OTGINT (1 << 5) /* Bit 5: OTG interrupt line status */ +#define SYSCON_USBINTST_I2CINT (1 << 6) /* Bit 6: I2C module interrupt line status */ + /* Bit 7: Reserved */ +#define SYSCON_USBINTST_NEEDCLK (1 << 8) /* Bit 8: USB need clock indicator */ + /* Bits 9-30: Reserved */ +#define SYSCON_USBINTST_ENINTS (1 << 31) /* Bit 31: Enable all USB interrupts */ + +/* DMA Request Select Register */ + +#define SYSCON_DMAREQSEL_INP8 (1 << 0) /* Bit 0: Input 8 0=UART0 TX 1=Timer 0 match 0 */ +#define SYSCON_DMAREQSEL_INP9 (1 << 1) /* Bit 1: Input 8 0=UART0 RX 1=Timer 0 match 1 */ +#define SYSCON_DMAREQSEL_INP10 (1 << 2) /* Bit 2: Input 8 0=UART1 TX 1=Timer 1 match 0 */ +#define SYSCON_DMAREQSEL_INP11 (1 << 3) /* Bit 3: Input 8 0=UART1 RX 1=Timer 1 match 1 */ +#define SYSCON_DMAREQSEL_INP12 (1 << 4) /* Bit 4: Input 8 0=UART2 TX 1=Timer 2 match 0 */ +#define SYSCON_DMAREQSEL_INP13 (1 << 5) /* Bit 5: Input 8 0=UART2 RX 1=Timer 2 match 1 */ +#define SYSCON_DMAREQSEL_INP14 (1 << 6) /* Bit 6: Input 8 0=UART3 TX 1=Timer 3 match 0 */ +#define SYSCON_DMAREQSEL_INP15 (1 << 7) /* Bit 7: Input 8 0=UART3 RX 1=Timer 3 match 1 */ + /* Bits 8-31: Reserved */ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_SYSCON_H */