diff --git a/ChangeLog b/ChangeLog
index 4f1ca5b555e5221cfd2b8078abc0d71a5432a7d7..e69b87635daa75683034b8e0164ba6f66cd740dc 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -6223,3 +6223,6 @@
 	* arch/arm/src/a1x/a1x_lowputc.c, a1x_serial.c, and a1x_serila.h:
 	  Beginning of an A10 serial driver.  From Alan Carvalho de Assis
 	  (2013-12-13).
+	* fs/procfs/procfs_utils.c:  Move some re-usable functions out of
+	  fs_procfsproc.c into a utility file (2013-12-14).
+
diff --git a/arch/arm/src/a1x/chip/a1x_piocfg.h b/arch/arm/src/a1x/chip/a1x_piocfg.h
new file mode 100644
index 0000000000000000000000000000000000000000..019eebf778dbb98b3a04f4d3388673970cf413bb
--- /dev/null
+++ b/arch/arm/src/a1x/chip/a1x_piocfg.h
@@ -0,0 +1,52 @@
+/************************************************************************************
+ * arch/arm/src/a1x/chip/a1x_piocfg.h
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_ARM_SRC_A1X_CHIP_A1X_PIOCFG_H
+#define __ARCH_ARM_SRC_A1X_CHIP_A1X_PIOCFG_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <arch/a1x/chip.h>
+
+#if defined(CONFIG_ARCH_CHIP_A10)
+#  include "chip/a10_piocfg.h"
+#else
+#  error Unrecognized A1X architecture
+#endif
+
+#endif /* __ARCH_ARM_SRC_A1X_CHIP_A1X_PIOCFG_H */
diff --git a/fs/procfs/Make.defs b/fs/procfs/Make.defs
index b39fa782db17eb49bf23387ccd99a1ba079d998c..c29dce37c30135f0a80e5b93014103c353da6d69 100644
--- a/fs/procfs/Make.defs
+++ b/fs/procfs/Make.defs
@@ -37,7 +37,7 @@ ifeq ($(CONFIG_FS_PROCFS),y)
 # Files required for procfs file system support
 
 ASRCS +=
-CSRCS += fs_procfs.c fs_procfsproc.c
+CSRCS += fs_procfs.c fs_procfsproc.c fs_procfsutil.c
 
 # Include procfs build support
 
diff --git a/fs/procfs/fs_procfsproc.c b/fs/procfs/fs_procfsproc.c
index 172a19fb6116a3e1dfa25026dbeb2aa6db6942a1..8721ce07e3a59d0675d3a193c4137185146ee2bf 100644
--- a/fs/procfs/fs_procfsproc.c
+++ b/fs/procfs/fs_procfsproc.c
@@ -71,10 +71,6 @@
 
 #define STATUS_LINELEN 32
 
-#ifndef MIN
-#  define MIN(a,b) ((a < b) ? a : b)
-#endif
-
 /****************************************************************************
  * Private Types
  ****************************************************************************/
@@ -128,9 +124,6 @@ struct process_level1_s
 /* Helpers */
 
 static int     process_findattr(FAR const char *attr);
-static size_t  process_addline(FAR struct process_file_s *attr,
-                 FAR char *buffer, size_t buflen, size_t linesize,
-                 off_t *offset);
 static ssize_t process_status(FAR struct process_file_s *attr,
                  FAR struct tcb_s *tcb, FAR char *buffer, size_t buflen,
                  off_t offset);
@@ -248,41 +241,6 @@ static int process_findattr(FAR const char *attr)
   return -ENOENT;
 }
 
-/****************************************************************************
- * Name: process_addline
- ****************************************************************************/
-
-static size_t process_addline(FAR struct process_file_s *attr,
-                             FAR char *buffer, size_t buflen,
-                             size_t linesize, off_t *offset)
-{
-  size_t copysize;
-  size_t lnoffset;
-
-  /* Will this line take us past the offset? */
-
-  lnoffset = *offset;
-  if (linesize < lnoffset)
-    {
-      /* No... decrement the offset and return without doing anything */
-
-      *offset -= linesize;
-      return 0;
-    }
-
-  /* Handle the remaining offset */
-
-  linesize -= lnoffset;
-  buffer   += lnoffset;
-  *offset   = 0;
-
-  /* Copy the line into the user buffer */
-
-  copysize = MIN(linesize, buflen);
-  memcpy(buffer, &attr->line[lnoffset], copysize);
-  return copysize;
-}
-
 /****************************************************************************
  * Name: process_status
  ****************************************************************************/
@@ -309,7 +267,7 @@ static ssize_t process_status(FAR struct process_file_s *attr,
 #endif 
   linesize   = snprintf(attr->line, STATUS_LINELEN, "%-12s%s\n",
                         "Name:", name);
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   buffer    += copysize;
@@ -325,7 +283,7 @@ static ssize_t process_status(FAR struct process_file_s *attr,
   linesize   = snprintf(attr->line, STATUS_LINELEN, "%-12s%s\n", "Type:",
                         g_ttypenames[(tcb->flags & TCB_FLAG_TTYPE_MASK) >>
                         TCB_FLAG_TTYPE_SHIFT]);
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   buffer    += copysize;
@@ -340,7 +298,7 @@ static ssize_t process_status(FAR struct process_file_s *attr,
 
   linesize   = snprintf(attr->line, STATUS_LINELEN, "%-12s%s\n", "State:",
                         g_statenames[tcb->task_state]);
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   buffer    += copysize;
@@ -360,7 +318,7 @@ static ssize_t process_status(FAR struct process_file_s *attr,
   linesize   = snprintf(attr->line, STATUS_LINELEN, "%-12s%d\n", "Priority:",
                         tcb->sched_priority);
 #endif
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   buffer    += copysize;
@@ -375,7 +333,7 @@ static ssize_t process_status(FAR struct process_file_s *attr,
 
   linesize   = snprintf(attr->line, STATUS_LINELEN, "%-12s%s\n", "Scheduler:",
                         tcb->flags & TCB_FLAG_ROUND_ROBIN ? "SCHED_RR" : "SCHED_FIFO");
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   buffer    += copysize;
@@ -391,7 +349,7 @@ static ssize_t process_status(FAR struct process_file_s *attr,
 #ifndef CONFIG_DISABLE_SIGNALS
   linesize = snprintf(attr->line, STATUS_LINELEN, "%-12s%08x\n", "SigMask:",
                       tcb->sigprocmask);
-  copysize = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
 #endif
@@ -427,7 +385,7 @@ static ssize_t process_cmdline(FAR struct process_file_s *attr,
 #endif 
   linesize   = strlen(name);
   memcpy(attr->line, name, linesize);
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   buffer    += copysize;
@@ -446,7 +404,7 @@ static ssize_t process_cmdline(FAR struct process_file_s *attr,
       FAR struct pthread_tcb_s *ptcb = (FAR struct pthread_tcb_s *)tcb;
 
       linesize   = snprintf(attr->line, STATUS_LINELEN, " 0x%p\n", ptcb->arg);
-      copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+      copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
       totalsize += copysize;
       buffer    += copysize;
@@ -463,7 +421,7 @@ static ssize_t process_cmdline(FAR struct process_file_s *attr,
   for (argv = ttcb->argv + 1; *argv; argv++)
     {
       linesize   = snprintf(attr->line, STATUS_LINELEN, " %s", *argv);
-      copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+      copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
       totalsize += copysize;
       buffer    += copysize;
@@ -476,7 +434,7 @@ static ssize_t process_cmdline(FAR struct process_file_s *attr,
     }
 
   linesize   = snprintf(attr->line, STATUS_LINELEN, "\n");
-  copysize   = process_addline(attr, buffer, remaining, linesize, &offset);
+  copysize   = procfs_memcpy(attr->line, linesize, buffer, remaining, &offset);
 
   totalsize += copysize;
   return totalsize;
diff --git a/fs/procfs/fs_procfsutil.c b/fs/procfs/fs_procfsutil.c
new file mode 100644
index 0000000000000000000000000000000000000000..ea483e180451fedb2cf7c8de42f4cd0c80d82e6d
--- /dev/null
+++ b/fs/procfs/fs_procfsutil.c
@@ -0,0 +1,153 @@
+/****************************************************************************
+ * fs/procfs/fs_procfsutil.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <string.h>
+
+#include <nuttx/fs/procfs.h>
+
+#if !defined(CONFIG_DISABLE_MOUNTPOINT) && defined(CONFIG_FS_PROCFS)
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#ifndef MIN
+#  define MIN(a,b) ((a < b) ? a : b)
+#endif
+
+#ifndef MAX
+#  define MAX(a,b) ((a > b) ? a : b)
+#endif
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: procfs_memcpy
+ *
+ * Description:
+ *   procfs/ file data may be read by the user with different user buffer
+ *   sizes to receive the data.  If the amount of data to be returned is
+ *   large or if the callers receive buffer is small, then multiple read
+ *   operations will be required.
+ *
+ *   If multiple read operations are required, then each read operation will
+ *   be identical accept that file position (f_pos) will be incremented with
+ *   each read:  f_pos must be incremented by the read method after each
+ *   read operation to provide the 'offset' for the next read.
+ *
+ *   procfs_memcpy() is a helper function.  Each read() method should
+ *   provide data in a local data buffer ('src' and 'srclen').  This
+ *   will transfer the data to the user receive buffer ('dest' and 'destlen'),
+ *   respecting both (1) the size of the destination buffer so that it will
+ *   write beyond the user receiver and (1) the file position, 'offset'.
+ *
+ *   This function will skip over data until the under of bytes specified
+ *   by 'offset' have been skipped.  Then it will transfer data from the
+ *   the procfs/ 'src' buffer into the user receive buffer.  No more than
+ *   'destlen' bytes will be transferred.
+ *
+ * Input Parameters:
+ *   src     - The address of the intermediate procfs/ buffer containing the
+ *             data to be returned.
+ *   srclen  - The number of bytes of data in the 'src' buffer
+ *   dest    - The address of the user's receive buffer.
+ *   destlen - The size (in bytes) of the user's receive buffer.
+ *   offset  - On input, this is the number of bytes to skip before returning
+ *             data;  If bytes were skipped, this offset will be decremented.
+ *             Data will not be transferred until this offset decrements to
+ *             zero.
+ *
+ * Returned Value:
+ *   The number of bytes actually transferred into the user's receive buffer.
+ *
+ ****************************************************************************/
+
+size_t procfs_memcpy(FAR const char *src, size_t srclen,
+                     FAR char *dest, size_t destlen,
+                     off_t *offset)
+{
+  size_t copysize;
+  size_t lnoffset;
+
+  /* Will this line take us past the offset? */
+
+  lnoffset = *offset;
+  if (srclen < lnoffset)
+    {
+      /* No... decrement the offset and return without doing anything */
+
+      *offset -= srclen;
+      return 0;
+    }
+
+  /* Handle the remaining offset */
+
+  srclen -= lnoffset;
+  dest   += lnoffset;
+  *offset = 0;
+
+  /* Copy the line into the user destination buffer */
+
+  copysize = MIN(srclen, destlen);
+  memcpy(dest, src, copysize);
+  return copysize;
+}
+
+#endif /* !CONFIG_DISABLE_MOUNTPOINT && CONFIG_FS_PROCFS */
diff --git a/include/nuttx/fs/procfs.h b/include/nuttx/fs/procfs.h
index ed7c56f185875493d94b089b9525505c9dcf0ceb..c5c844c1c0d081a9032e4c3d324e5a1cb86f9e49 100644
--- a/include/nuttx/fs/procfs.h
+++ b/include/nuttx/fs/procfs.h
@@ -134,7 +134,50 @@ extern "C" {
 #define EXTERN extern
 #endif
 
-/* Nothing here yet */
+/****************************************************************************
+ * Name: procfs_memcpy
+ *
+ * Description:
+ *   procfs/ file data may be read by the user with different user buffer
+ *   sizes to receive the data.  If the amount of data to be returned is
+ *   large or if the callers receive buffer is small, then multiple read
+ *   operations will be required.
+ *
+ *   If multiple read operations are required, then each read operation will
+ *   be identical accept that file position (f_pos) will be incremented with
+ *   each read:  f_pos must be incremented by the read method after each
+ *   read operation to provide the 'offset' for the next read.
+ *
+ *   procfs_memcpy() is a helper function.  Each read() method should
+ *   provide data in a local data buffer ('src' and 'srclen').  This
+ *   will transfer the data to the user receive buffer ('dest' and 'destlen'),
+ *   respecting both (1) the size of the destination buffer so that it will
+ *   write beyond the user receiver and (1) the file position, 'offset'.
+ *
+ *   This function will skip over data until the under of bytes specified
+ *   by 'offset' have been skipped.  Then it will transfer data from the
+ *   the procfs/ 'src' buffer into the user receive buffer.  No more than
+ *   'destlen' bytes will be transferred.
+ *
+ * Input Parameters:
+ *   src     - The address of the intermediate procfs/ buffer containing the
+ *             data to be returned.
+ *   srclen  - The number of bytes of data in the 'src' buffer
+ *   dest    - The address of the user's receive buffer.
+ *   destlen - The size (in bytes) of the user's receive buffer.
+ *   offset  - On input, this is the number of bytes to skip before returning
+ *             data;  If bytes were skipped, this offset will be decremented.
+ *             Data will not be transferred until this offset decrements to
+ *             zero.
+ *
+ * Returned Value:
+ *   The number of bytes actually transferred into the user's receive buffer.
+ *
+ ****************************************************************************/
+
+size_t procfs_memcpy(FAR const char *src, size_t srclen,
+                     FAR char *dest, size_t destlen,
+                     off_t *offset);
 
 #undef EXTERN
 #ifdef __cplusplus
diff --git a/mm/mm_memalign.c b/mm/mm_memalign.c
index 03fccc7fd49812e6b57459139c3124309d53e342..a420afe5ee19762594128fb9b0bb905405199cb3 100644
--- a/mm/mm_memalign.c
+++ b/mm/mm_memalign.c
@@ -47,6 +47,16 @@
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
+/* If multiple heaps are used, then the heap must be passed as a parameter to
+ * mm_malloc().  In the single heap case, mm_malloc() is not available and
+ * we have to use malloc() (which, internally, will use the same heap).
+ */
+
+#ifdef CONFIG_MM_MULTIHEAP
+#  define MM_MALLOC(h,s) mm_malloc(h,s)
+#else
+#  define MM_MALLOC(h,s) malloc(s)
+#endif
 
 /****************************************************************************
  * Private Functions
@@ -83,7 +93,7 @@ FAR void *mm_memalign(FAR struct mm_heap_s *heap, size_t alignment,
 
   if (alignment <= MM_MIN_CHUNK)
     {
-      return mm_malloc(heap, size);
+      return MM_MALLOC(heap, size);
     }
 
   /* Adjust the size to account for (1) the size of the allocated node, (2)
@@ -103,7 +113,7 @@ FAR void *mm_memalign(FAR struct mm_heap_s *heap, size_t alignment,
 
   /* Then malloc that size */
 
-  rawchunk = (size_t)mm_malloc(heap, allocsize);
+  rawchunk = (size_t)MM_MALLOC(heap, allocsize);
   if (rawchunk == 0)
     {
       return NULL;
diff --git a/mm/mm_realloc.c b/mm/mm_realloc.c
index b738648f260264dfb09a5777833ead48f1592331..3bf927d9b2ae9321143eb6f6bb3aa376f2ea4ab9 100644
--- a/mm/mm_realloc.c
+++ b/mm/mm_realloc.c
@@ -49,10 +49,10 @@
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
-/* If multiple heaps are used, then the heap must be passed as a paramter to
- * mm_malloc() and mm_free().  If the single heap case, mm_malloc() and
+/* If multiple heaps are used, then the heap must be passed as a parameter to
+ * mm_malloc() and mm_free().  In the single heap case, mm_malloc() and
  * mm_free() are not available and we have to use malloc() and free() (which,
- * internally will use the same heap).
+ * internally, will use the same heap).
  */
 
 #ifdef CONFIG_MM_MULTIHEAP