diff --git a/ChangeLog b/ChangeLog
index 315a98d48f22b20e82c26adc380249d94d4f95e3..bb092821b7eea4cb15cb03f3f251c04ff689495f 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1319,7 +1319,7 @@
* lib/lib_strnlen.c -- Added POSIX 2008 strnlen() function. Contributed
by Michael Hrabanek.
* Fix wild, consistent naming error. For some reason, I called the at32uc3*
- parts at91uc* everywhere. Fixed by changing lots of files.
+ parts at91uc* everywhere. Fixed by changing lots of files and directories.
* configs/avr32dev1/ostest - The AVR32 port now successfully passes the
examples/ostest. We have a good AVR32 port!
* configs/avr32dev1/nsh - Added a configuration to support the NuttShell
@@ -1327,5 +1327,9 @@
is, very likely, my hardware setup).
* lib/lib_open.c - Fix an error in fdopen when a valid file desciptor does
not refer to an open file.
+ * configs/olimex-lpc1766stk - Add support for the Olimex LPC1766-STK
+ development board. (Initial check-in is just a clone of the Nucleus-2G
+ LPC1768 board logic).
+
diff --git a/Documentation/NuttX.html b/Documentation/NuttX.html
index d3fff7c9bb6ad7869ac878695a72e8acbb5e8351..1a25852be499d1118aeb90cbc02a768b30b98e7a 100644
--- a/Documentation/NuttX.html
+++ b/Documentation/NuttX.html
@@ -8,7 +8,7 @@
<tr align="center" bgcolor="#e4e4e4">
<td>
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
- <p>Last Updated: November 5, 2010</p>
+ <p>Last Updated: November 6, 2010</p>
</td>
</tr>
</table>
@@ -785,15 +785,15 @@
This is primarily a bugfix release and includes some important corrections to the code:
<ul>
<li>
- Fixed an important error in the signal trampoline logic. Essentially,
- interrupts are re-enabled while the signal handler executes, but the
- logic to re-disable the interrupts before returning from the signal
- handler trampoline was missing. Under certain circumstances, this
- can cause stack corruption. This was discovered by David Hewson on
- an ARM9 platform, but since the code has been leveraged, the bug has
- been propogated from ARM to Cortex-M3, AVR32, M16C, SH1, ZNEO, eZ80,
- Z8, and Z80 -- almost every architecture. The correction has been
- incorporated for all architectures but only verified on a few.
+ Fixed an important error in the signal trampoline logic. Essentially,
+ interrupts are re-enabled while the signal handler executes, but the
+ logic to re-disable the interrupts before returning from the signal
+ handler trampoline was missing. Under certain circumstances, this
+ can cause stack corruption. This was discovered by David Hewson on
+ an ARM9 platform, but since the code has been leveraged, the bug has
+ been propogated from ARM to Cortex-M3, AVR32, M16C, SH1, ZNEO, eZ80,
+ Z8, and Z80 -- almost every architecture. The correction has been
+ incorporated for all architectures but only verified on a few.
</li>
</ul>
</p>
@@ -801,13 +801,13 @@
Other notable changes in NuttX-5.12 include:
<ul>
<li>
- A complete port for the AVR32 (AT32UC3B0256) is incorporated in the
- source tree. Testing of this port is underway now. This release
- was made before verifying this port in order to get the important
- bugfix in place.
+ A complete port for the AVR32 (AT32UC3B0256) is incorporated in the
+ source tree. Testing of this port is underway now. This release
+ was made before verifying this port in order to get the important
+ bugfix in place.
</li>
<li>
- Other miscellaneous bugfix and enhancements as noted in the ChangeLog.
+ Other miscellaneous bugfix and enhancements as noted in the ChangeLog.
</li>
</ul>
</p>
@@ -1038,8 +1038,8 @@
</p>
<p>
Support for <a href="NuttXDemandPaging.html">on-demand paging</a> has been developed for the EA3131.
- That support would all execute of a program in SPI FLASH by paging code sections out of SPI flash as needed.
- However, as of this writing, I have not had the opportunity to verify this new feature.
+ That support would all execute of a program in SPI FLASH by paging code sections out of SPI flash as needed.
+ However, as of this writing, I have not had the opportunity to verify this new feature.
</p>
</ul>
</td>
@@ -1231,20 +1231,24 @@
<td><br></td>
<td>
<p>
- <b>NXP LPC1768</b>.
- Configurations are available for two boards:
+ <b>NXP LPC1766 and LPC1768</b>.
+ Configurations are available for three boards:
<ul>
<li>
- The Nucleus 2G board from <a href="http://www.2g-eng.com/">2G Engineering</a>, and
+ The Nucleus 2G board from <a href="http://www.2g-eng.com/">2G Engineering</a> (LPC1768),
</li>
<li>
- The mbed board from <a href="http://mbed.org">mbed.org</a> (Contributed by Dave Marples).
+ The mbed board from <a href="http://mbed.org">mbed.org</a> (LPC1768, Contributed by Dave Marples), and
+ </li>
+ <li>
+ The LPC1766-sTK board from <a href="http://www.olimex.com/">Olimex</a> (LPC1766).
</li>
</ul>
</p>
<p>
- Both boards feature the NXP LPC1768 MCU and a GNU arm-elf or arm-eabi toolchain* under
- either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools).
+ The Nucleus 2G and the mbed boards feature the NXP LPC1768 MCU;
+ the Olimex LPC1766-STK board features an LPC1766.
+ All use a GNU arm-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools).
</p>
<ul>
<p>
@@ -1264,6 +1268,11 @@
<p>
Support for the mbed board was contributed by Dave Marples and released in NuttX-5.11.
</p>
+ <p>
+ Support for the Olimex-LPC1766 is newly added to NuttX and is still undergoing development,
+ test, and integration.
+ Basic support for this board is expected in NuttX-5.13.
+ </p>
<p>
<b>Development Environments:</b>
1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin
@@ -1344,12 +1353,21 @@
<b>STATUS:</b>
This port is nearing he completion of development.
All code is complete for the basic NuttX port including header files for all AT32UC3* peripherals.
- The untested AVR32 code was present in the 5.12 release of NuttX.
- Since then, the basic RTOS port has solidified;
- the port successfully passes the NuttX OS test (examples/ostest).
- A NuttShell (NSH) configuration is in place see the <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>)
- and is under test now.
- The basic, verified port will be released in NuttX-5.13.
+ The untested AVR32 code was present in the 5.12 release of NuttX.
+ Since then, the basic RTOS port has solidified:
+ <ul>
+ <li>
+ The port successfully passes the NuttX OS test (examples/ostest).
+ </li>
+ <li>
+ A NuttShell (NSH) configuration is in place see the <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>).
+ Testing of that configuration has been postponed (because it got bumped by the Olimex LPC1766-STK port).
+ Current Status: I think I have a hardware problem with my serial port setup.
+ There is a good chance that the NSH port is complete and functionality, but I am not yet able to demonstrate that.
+ At present, I get nothing coming in the serial RXD line (probably because it is configured wrong or I have the MAX232 connected wrong).
+ </li>
+ </ul>
+ The basic, port (including the verified examples/ostest configuration) will be released in NuttX-5.13.
A complete port will include drivers for additional AVR32 UC3 devices -- like SPI and USB --- and will be available in a later release,
time permitting.
</p>
@@ -1403,7 +1421,7 @@
<p>
<b>STATUS:</b>
Initial source files released in nuttx-0.4.2.
- At this point, the port has not been integrated; the target cannot be built
+ At this point, the port has not been integrated; the target cannot be built
because the GNU <code>m16c-elf-ld</code> link fails with the following message:
</p>
<ul>
@@ -1891,47 +1909,47 @@ Other memory:
<ul><pre>
nuttx-5.12 2010-10-26 Gregory Nutt <spudmonkey@racsa.co.cr>
- * arch/avr - Add a place to support AVR family processors.
- * arch/avr/include/avr32 and arch/avr/src/avr32 - Add support for AVR32
- (all of the AVR32 is a work in progress).
- * arch/avr/include/at32uc3 and arch/avr/src/at32uc3 - Add support
- for the AVR32 UC3A/B family of AVR32 MCUs.
- * confgs/avr32dev1 - Add support for the Atmel AVR32DEV1 board featuring
- the AT32UC3B0256 MCU. This board is produced by www.mcuzone.com.
- * include/stdlib.h, lib/Makefile, lib/lib_abs.c, lib/lib_labs.c,
- lib_labs.c, lib_llabs.c, lib_imaxabs.c - Add abs(), labs(), llabs(), and
- imaxabs().
- * Add include/inttypes.h
- * arch/hc/src/mc9s12ne64 - This hcs12 port grew a few more files. But it
- is still a long way from complete.
- * arch/*/src/*/*_sigdeliver.c - Fixed a serious error in the signal
- trampoline logic. Essentially, interrupts are re-enabled while the
- signal handler executes, but the logic to re-disable the interrupts
- before returning from the signal handler trampoline was missing. Under
- certain circumstances, this can cause stack corruption. This was
- discovered by David Hewson on an ARM9 platform, but since the code
- has been leveraged, the bug has been propogated from ARM to Cortex-M3,
- AVR32, M16C, SH1, ZNEO, eZ80, Z8, and Z80 -- almost every architecture.
- The correction has been incorporated for all architectures but only
- verified on a few.
+ * arch/avr - Add a place to support AVR family processors.
+ * arch/avr/include/avr32 and arch/avr/src/avr32 - Add support for AVR32
+ (all of the AVR32 is a work in progress).
+ * arch/avr/include/at32uc3 and arch/avr/src/at32uc3 - Add support
+ for the AVR32 UC3A/B family of AVR32 MCUs.
+ * confgs/avr32dev1 - Add support for the Atmel AVR32DEV1 board featuring
+ the AT32UC3B0256 MCU. This board is produced by www.mcuzone.com.
+ * include/stdlib.h, lib/Makefile, lib/lib_abs.c, lib/lib_labs.c,
+ lib_labs.c, lib_llabs.c, lib_imaxabs.c - Add abs(), labs(), llabs(), and
+ imaxabs().
+ * Add include/inttypes.h
+ * arch/hc/src/mc9s12ne64 - This hcs12 port grew a few more files. But it
+ is still a long way from complete.
+ * arch/*/src/*/*_sigdeliver.c - Fixed a serious error in the signal
+ trampoline logic. Essentially, interrupts are re-enabled while the
+ signal handler executes, but the logic to re-disable the interrupts
+ before returning from the signal handler trampoline was missing. Under
+ certain circumstances, this can cause stack corruption. This was
+ discovered by David Hewson on an ARM9 platform, but since the code
+ has been leveraged, the bug has been propogated from ARM to Cortex-M3,
+ AVR32, M16C, SH1, ZNEO, eZ80, Z8, and Z80 -- almost every architecture.
+ The correction has been incorporated for all architectures but only
+ verified on a few.
pascal-2.0 2009-12-21 Gregory Nutt <spudmonkey@racsa.co.cr>
- * Updated to use standard C99 types in stdint.h and
- stdbool.h. This change was necessary for compatibility
- with NuttX-5.0 (any beyond).
+ * Updated to use standard C99 types in stdint.h and
+ stdbool.h. This change was necessary for compatibility
+ with NuttX-5.0 (any beyond).
buildroot-1.8 2009-12-21 <spudmonkey@racsa.co.cr>
- * configs/cortexm3-defconfig-4.3.3: Added support for NuttX NXFLAT
- tools.
- * configs/arm7tdmi-defconfig-4.3.3: Update to arm7tdmi-defconfig-4.2.4.
- Also builds NuttX NXFLAT tools.
- * configs/m68hc12-defconfig-4.3.3: Update to m68ch11-defconfig.
- * configs/m68hc12-defconfig-3.4.6: There are problems building GCC
- 4.3.3 for the hc12.
- * configs/m32c-defconfig-4.2.4: Added genromfs
- * configs/m32c-defconfig-4.3.3: Update to m32c-defconfig-4.2.4
+ * configs/cortexm3-defconfig-4.3.3: Added support for NuttX NXFLAT
+ tools.
+ * configs/arm7tdmi-defconfig-4.3.3: Update to arm7tdmi-defconfig-4.2.4.
+ Also builds NuttX NXFLAT tools.
+ * configs/m68hc12-defconfig-4.3.3: Update to m68ch11-defconfig.
+ * configs/m68hc12-defconfig-3.4.6: There are problems building GCC
+ 4.3.3 for the hc12.
+ * configs/m32c-defconfig-4.2.4: Added genromfs
+ * configs/m32c-defconfig-4.3.3: Update to m32c-defconfig-4.2.4
</pre></ul>
<table width ="100%">
@@ -1945,29 +1963,32 @@ buildroot-1.8 2009-12-21 <spudmonkey@racsa.co.cr>
<ul><pre>
nuttx-5.13 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
- * lib/lib_strnlen.c -- Added POSIX 2008 strnlen() function. Contributed
- by Michael Hrabanek.
- * Fix wild, consistent naming error. For some reason, I called the at32uc3*
- parts at91uc* everywhere. Fixed by changing lots of files.
- * configs/avr32dev1/ostest - The AVR32 port now successfully passes the
- examples/ostest. We have a good AVR32 port!
- * configs/avr32dev1/nsh - Added a configuration to support the NuttShell
- (NSH). As of this writing, here is a problem receiving serial data (this
- is, very likely, my hardware setup).
- * lib/lib_open.c - Fix an error in fdopen when a valid file desciptor does
- not refer to an open file.
+ * lib/lib_strnlen.c -- Added POSIX 2008 strnlen() function. Contributed
+ by Michael Hrabanek.
+ * Fix wild, consistent naming error. For some reason, I called the at32uc3*
+ parts at91uc* everywhere. Fixed by changing lots of files and directories.
+ * configs/avr32dev1/ostest - The AVR32 port now successfully passes the
+ examples/ostest. We have a good AVR32 port!
+ * configs/avr32dev1/nsh - Added a configuration to support the NuttShell
+ (NSH). As of this writing, here is a problem receiving serial data (this
+ is, very likely, my hardware setup).
+ * lib/lib_open.c - Fix an error in fdopen when a valid file desciptor does
+ not refer to an open file.
+ * configs/olimex-lpc1766stk - Add support for the Olimex LPC1766-STK
+ development board. (Initial check-in is just a clone of the Nucleus-2G
+ LPC1768 board logic).
pascal-2.1 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
buildroot-1.9 2010-xx-xx <spudmonkey@racsa.co.cr>
- * configs/arm926t-defconfig-4.3.3: update arm926t-defconfig-4.2.4
- * configs/arm926t-defconfig-nxflat: NXFLAT-only configuration for
- arm926
- * toolchain/gdb/gdb.mk - Remove ncurses dependency from gdb_target target.
- * toolchain/gdb/gdb.mk - Added --disable-werror to GDB configuration line.
- GDB 6.8 won't build because the tarball was released with -Werror enabled and
- the build stops on the first warning.
+ * configs/arm926t-defconfig-4.3.3: update arm926t-defconfig-4.2.4
+ * configs/arm926t-defconfig-nxflat: NXFLAT-only configuration for
+ arm926
+ * toolchain/gdb/gdb.mk - Remove ncurses dependency from gdb_target target.
+ * toolchain/gdb/gdb.mk - Added --disable-werror to GDB configuration line.
+ GDB 6.8 won't build because the tarball was released with -Werror enabled and
+ the build stops on the first warning.
</pre></ul>
diff --git a/configs/nucleus2g/README.txt b/configs/nucleus2g/README.txt
index 04e4223318b127f9f34e4ce837cf24c901a196eb..148b5e0c71d2910123adc058fe899ef8d1acb44f 100755
--- a/configs/nucleus2g/README.txt
+++ b/configs/nucleus2g/README.txt
@@ -12,7 +12,6 @@ Contents
GNU Toolchain Options
IDEs
NuttX buildroot Toolchain
- USB Device Controller Functions
LEDs
Nucleus 2G Configuration Options
Configurations
diff --git a/configs/olimex-lpc1766stk/README.txt b/configs/olimex-lpc1766stk/README.txt
new file mode 100755
index 0000000000000000000000000000000000000000..b1938b27fc24b9e3e107f065b8599c80b125e027
--- /dev/null
+++ b/configs/olimex-lpc1766stk/README.txt
@@ -0,0 +1,359 @@
+README
+^^^^^^
+
+README for NuttX port to the Olimex LPC1766-STK development board
+
+Contents
+^^^^^^^^
+
+ Olimex LPC1766-STK development board
+ Development Environment
+ GNU Toolchain Options
+ IDEs
+ NuttX buildroot Toolchain
+ LEDs
+ Olimex LPC1766-STK Configuration Options
+ Configurations
+
+Olimex LPC1766-STK development board
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+GPIO Usage:
+
+ [To be provided]
+
+Development Environment
+^^^^^^^^^^^^^^^^^^^^^^^
+
+ Either Linux or Cygwin on Windows can be used for the development environment.
+ The source has been built only using the GNU toolchain (see below). Other
+ toolchains will likely cause problems. Testing was performed using the Cygwin
+ environment.
+
+GNU Toolchain Options
+^^^^^^^^^^^^^^^^^^^^^
+
+ The NuttX make system has been modified to support the following different
+ toolchain options.
+
+ 1. The CodeSourcery GNU toolchain,
+ 2. The devkitARM GNU toolchain,
+ 3. The NuttX buildroot Toolchain (see below).
+
+ All testing has been conducted using the NuttX buildroot toolchain. However,
+ the make system is setup to default to use the devkitARM toolchain. To use
+ the CodeSourcery or devkitARM toolchain, you simply need add one of the
+ following configuration options to your .config (or defconfig) file:
+
+ CONFIG_LPC17_CODESOURCERYW=y : CodeSourcery under Windows
+ CONFIG_LPC17_CODESOURCERYL=y : CodeSourcery under Linux
+ CONFIG_LPC17_DEVKITARM=y : devkitARM under Windows
+ CONFIG_LPC17_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
+
+ If you are not using CONFIG_LPC17_BUILDROOT, then you may also have to modify
+ the PATH in the setenv.h file if your make cannot find the tools.
+
+ NOTE: the CodeSourcery (for Windows)and devkitARM are Windows native toolchains.
+ The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or
+ Linux native toolchains. There are several limitations to using a Windows based
+ toolchain in a Cygwin environment. The three biggest are:
+
+ 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
+ performed automatically in the Cygwin makefiles using the 'cygpath' utility
+ but you might easily find some new path problems. If so, check out 'cygpath -w'
+
+ 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
+ are used in Nuttx (e.g., include/arch). The make system works around these
+ problems for the Windows tools by copying directories instead of linking them.
+ But this can also cause some confusion for you: For example, you may edit
+ a file in a "linked" directory and find that your changes had not effect.
+ That is because you are building the copy of the file in the "fake" symbolic
+ directory. If you use a Windows toolchain, you should get in the habit of
+ making like this:
+
+ make clean_context all
+
+ An alias in your .bashrc file might make that less painful.
+
+ 3. Dependencies are not made when using Windows versions of the GCC. This is
+ because the dependencies are generated using Windows pathes which do not
+ work with the Cygwin make.
+
+ Support has been added for making dependencies with the windows-native toolchains.
+ That support can be enabled by modifying your Make.defs file as follows:
+
+ - MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
+
+ If you have problems with the dependency build (for example, if you are not
+ building on C:), then you may need to modify tools/mkdeps.sh
+
+ NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
+ level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
+ -Os.
+
+ NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
+ the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+ path or will get the wrong version of make.
+
+IDEs
+^^^^
+
+ NuttX is built using command-line make. It can be used with an IDE, but some
+ effort will be required to create the project (There is a simple RIDE project
+ in the RIDE subdirectory).
+
+ Makefile Build
+ --------------
+ Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+ simply use the NuttX makefile to build the system. That is almost for free
+ under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
+ makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+ there is a lot of help on the internet).
+
+ Native Build
+ ------------
+ Here are a few tips before you start that effort:
+
+ 1) Select the toolchain that you will be using in your .config file
+ 2) Start the NuttX build at least one time from the Cygwin command line
+ before trying to create your project. This is necessary to create
+ certain auto-generated files and directories that will be needed.
+ 3) Set up include pathes: You will need include/, arch/arm/src/lpc17xx,
+ arch/arm/src/common, arch/arm/src/cortexm3, and sched/.
+ 4) All assembly files need to have the definition option -D __ASSEMBLY__
+ on the command line.
+
+ Startup files will probably cause you some headaches. The NuttX startup file
+ is arch/arm/src/lpc17x/lpc17_vectors.S.
+
+NuttX buildroot Toolchain
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ A GNU GCC-based toolchain is assumed. The files */setenv.sh should
+ be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+ different from the default in your PATH variable).
+
+ If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+ SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
+ This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+ 1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+ cd tools
+ ./configure.sh olimex-lpc1766stk/<sub-dir>
+
+ 2. Download the latest buildroot package into <some-dir>
+
+ 3. unpack the buildroot tarball. The resulting directory may
+ have versioning information on it like buildroot-x.y.z. If so,
+ rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+ 4. cd <some-dir>/buildroot
+
+ 5. cp configs/cortexm3-defconfig-4.3.3 .config
+
+ 6. make oldconfig
+
+ 7. make
+
+ 8. Edit setenv.h, if necessary, so that the PATH variable includes
+ the path to the newly built binaries.
+
+ See the file configs/README.txt in the buildroot source tree. That has more
+ detailed PLUS some special instructions that you will need to follow if you
+ are building a Cortex-M3 toolchain for Cygwin under Windows.
+
+ NOTE: This is an OABI toolchain.
+
+LEDs
+^^^^
+
+ If CONFIG_ARCH_LEDS is defined, then support for the LPC1766-STK LEDs will be
+ included in the build. See:
+
+ - configs/olimex-lpc1766stk/include/board.h - Defines LED constants, types and
+ prototypes the LED interface functions.
+
+ - configs/olimex-lpc1766stk/src/lpc1766stk_internal.h - GPIO settings for the LEDs.
+
+ - configs/olimex-lpc1766stk/src/up_leds.c - LED control logic.
+
+ The LPC1766-STK has [tbd] LEDs...
+ If CONFIG_ARCH_LEDS is defined, these LEDs will be controlled as follows for
+ NuttX debug functionality (where NC means "No Change").
+
+ [To be provided]
+
+Olimex LPC1766-STK Configuration Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ CONFIG_ARCH - Identifies the arch/ subdirectory. This should
+ be set to:
+
+ CONFIG_ARCH=arm
+
+ CONFIG_ARCH_family - For use in C code:
+
+ CONFIG_ARCH_ARM=y
+
+ CONFIG_ARCH_architecture - For use in C code:
+
+ CONFIG_ARCH_CORTEXM3=y
+
+ CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+ CONFIG_ARCH_CHIP=lpc17xx
+
+ CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+ chip:
+
+ CONFIG_ARCH_CHIP_LPC1766=y
+
+ CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+ hence, the board that supports the particular chip or SoC.
+
+ CONFIG_ARCH_BOARD=olimex-lpc1766stk (for the Olimex LPC1766-STK)
+
+ CONFIG_ARCH_BOARD_name - For use in C code
+
+ CONFIG_ARCH_BOARD_LPC1766STK=y
+
+ CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+ of delay loops
+
+ CONFIG_ENDIAN_BIG - define if big endian (default is little
+ endian)
+
+ CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
+
+ CONFIG_DRAM_SIZE=(32*1024) (32Kb)
+
+ There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
+
+ CONFIG_DRAM_START - The start address of installed DRAM
+
+ CONFIG_DRAM_START=0x10000000
+
+ CONFIG_DRAM_END - Last address+1 of installed RAM
+
+ CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+
+ CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
+
+ CONFIG_ARCH_IRQPRIO=y
+
+ CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+ have LEDs
+
+ CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+ stack. If defined, this symbol is the size of the interrupt
+ stack in bytes. If not defined, the user task stacks will be
+ used during interrupt handling.
+
+ CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+ CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+
+ CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+ cause a 100 second delay during boot-up. This 100 second delay
+ serves no purpose other than it allows you to calibratre
+ CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
+ the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+ the delay actually is 100 seconds.
+
+ Individual subsystems can be enabled:
+
+ CONFIG_LPC17_MAINOSC=y
+ CONFIG_LPC17_PLL0=y
+ CONFIG_LPC17_PLL1=n
+ CONFIG_LPC17_ETHERNET=n
+ CONFIG_LPC17_USBHOST=n
+ CONFIG_LPC17_USBOTG=n
+ CONFIG_LPC17_USBDEV=n
+ CONFIG_LPC17_UART0=y
+ CONFIG_LPC17_UART1=n
+ CONFIG_LPC17_UART2=n
+ CONFIG_LPC17_UART3=n
+ CONFIG_LPC17_CAN1=n
+ CONFIG_LPC17_CAN2=n
+ CONFIG_LPC17_SPI=n
+ CONFIG_LPC17_SSP0=n
+ CONFIG_LPC17_SSP1=n
+ CONFIG_LPC17_I2C0=n
+ CONFIG_LPC17_I2C1=n
+ CONFIG_LPC17_I2S=n
+ CONFIG_LPC17_TMR0=n
+ CONFIG_LPC17_TMR1=n
+ CONFIG_LPC17_TMR2=n
+ CONFIG_LPC17_TMR3=n
+ CONFIG_LPC17_RIT=n
+ CONFIG_LPC17_PWM=n
+ CONFIG_LPC17_MCPWM=n
+ CONFIG_LPC17_QEI=n
+ CONFIG_LPC17_RTC=n
+ CONFIG_LPC17_WDT=n
+ CONFIG_LPC17_ADC=n
+ CONFIG_LPC17_DAC=n
+ CONFIG_LPC17_GPDMA=n
+ CONFIG_LPC17_FLASH=n
+
+ LPC17xx specific device driver settings
+
+ CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+ console and ttys0 (default is the UART0).
+ CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+ This specific the size of the receive buffer
+ CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+ being sent. This specific the size of the transmit buffer
+ CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+ CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+ CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+ CONFIG_UARTn_2STOP - Two stop bits
+
+ LPC17xx USB Configuration
+
+ CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+ Handle USB Start-Of-Frame events.
+ Enable reading SOF from interrupt handler vs. simply reading on demand.
+ Probably a bad idea... Unless there is some issue with sampling the SOF
+ from hardware asynchronously.
+ CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+ Enable high priority interrupts. I have no idea why you might want to
+ do that
+ CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+ Number of DMA descriptors to allocate in SRAM.
+ CONFIG_LPC17_USBDEV_DMA
+ Enable lpc17xx-specific DMA support
+
+Configurations
+^^^^^^^^^^^^^^
+
+Each Olimex LPC1766-STK configuration is maintained in a
+sudirectory and can be selected as follow:
+
+ cd tools
+ ./configure.sh olimex-lpc1766stk/<subdir>
+ cd -
+ . ./setenv.sh
+
+Where <subdir> is one of the following:
+
+ nsh:
+ Configures the NuttShell (nsh) located at examples/nsh. The
+ Configuration enables only the serial NSH interfaces.
+
+ ostest:
+ This configuration directory, performs a simple OS test using
+ examples/ostest.
+
+ usbserial:
+ This configuration directory exercises the USB serial class
+ driver at examples/usbserial. See examples/README.txt for
+ more information.
+
+ usbstorage:
+ This configuration directory exercises the USB mass storage
+ class driver at examples/usbstorage. See examples/README.txt for
+ more information.
+
diff --git a/configs/olimex-lpc1766stk/include/board.h b/configs/olimex-lpc1766stk/include/board.h
new file mode 100755
index 0000000000000000000000000000000000000000..704431411f098413dc30dc62c4d6e37e72e6211f
--- /dev/null
+++ b/configs/olimex-lpc1766stk/include/board.h
@@ -0,0 +1,211 @@
+/************************************************************************************
+ * configs/olimex-lpc1766stk/include/board.h
+ * include/arch/board/board.h
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+#warning "Review -- these settings are for the Nucleus2G board */
+/* NOTE: The following definitions require lpc17_syscon.h. It is not included here
+ * because the including C file may not have that file in its include path.
+ */
+
+#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
+#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
+#define BOARD_RTCCLK_FREQUENCY (32000) /* RTC oscillator frequency */
+#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
+
+/* This is the clock setup we configure for:
+ *
+ * SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source
+ * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
+ * CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
+ */
+
+#define LPC17_CCLK 80000000 /* 80Mhz*/
+
+/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
+ * of the main osciallator.
+ */
+
+#undef CONFIG_LPC17_MAINOSC
+#define CONFIG_LPC17_MAINOSC 1
+#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
+
+/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
+ * The input to the divider (PLLCLK) will be determined by the PLL output.
+ */
+
+#define BOARD_CCLKCFG_DIVIDER 6
+#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
+
+/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
+ *
+ * Source clock: Main oscillator
+ * PLL0 Multiplier value (M): 20
+ * PLL0 Pre-divider value (N): 1
+ */
+
+#undef CONFIG_LPC17_PLL0
+#define CONFIG_LPC17_PLL0 1
+#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
+
+#define BOARD_PLL0CFG_MSEL 20
+#define BOARD_PLL0CFG_NSEL 1
+#define BOARD_PLL0CFG_VALUE \
+ (((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
+ ((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
+
+/* PLL1 -- Not used. */
+
+#undef CONFIG_LPC17_PLL1
+#define BOARD_PLL1CFG_MSEL 36
+#define BOARD_PLL1CFG_NSEL 1
+#define BOARD_PLL1CFG_VALUE \
+ (((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
+ ((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
+
+/* USB divider. This divder is used when PLL1 is not enabled to get the USB clock
+ * from PLL0:
+ *
+ * USBCLK = PLL0CLK / 10 = 48MHz
+ */
+
+#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
+
+/* FLASH Configuration */
+
+#undef CONFIG_LP17_FLASH
+#define CONFIG_LP17_FLASH 1
+#define BOARD_FLASHCFG_VALUE 0x0000303a
+
+/* LED definitions ******************************************************************/
+
+#define LED_STARTED 0
+#define LED_HEAPALLOCATE 1
+#define LED_IRQSENABLED 2
+#define LED_STACKCREATED 3
+#define LED_INIRQ 4
+#define LED_SIGNAL 5
+#define LED_ASSERTION 6
+#define LED_PANIC 7
+
+/* Alternate pin selections *********************************************************/
+#warning "Review -- these are for the Nucleus2G board */
+/* UART1 -- Not connected */
+
+#define GPIO_UART1_TXD GPIO_UART1_TXD_1
+#define GPIO_UART1_RXD GPIO_UART1_RXD_1
+#define GPIO_UART1_CTS GPIO_UART1_CTS_1
+#define GPIO_UART1_DCD GPIO_UART1_DCD_1
+#define GPIO_UART1_DSR GPIO_UART1_DSR_1
+#define GPIO_UART1_DTR GPIO_UART1_DTR_1
+#define GPIO_UART1_RI GPIO_UART1_RI_1
+#define GPIO_UART1_RTS GPIO_UART1_RTS_1
+
+/* UART2 -- Not connected */
+
+#define GPIO_UART2_TXD GPIO_UART2_TXD_1
+#define GPIO_UART2_RXD GPIO_UART2_RXD_1
+
+/* UART3 -- Not connected */
+
+#define GPIO_UART3_TXD GPIO_UART3_TXD_1
+#define GPIO_UART3_RXD GPIO_UART3_RXD_1
+
+/* Either SPI or SSP0 can drive the MMC/SD slot (SSP0 alternate pin settings are
+ * not connected)
+ */
+
+#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
+#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
+#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
+#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
+
+/* SSP1 */
+
+#define GPIO_SSP1_SCK GPIO_SSP1_SCK_1
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ * All LPC17xx architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void lpc17_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_BOARD_BOARD_H */
diff --git a/configs/olimex-lpc1766stk/nsh/Make.defs b/configs/olimex-lpc1766stk/nsh/Make.defs
new file mode 100755
index 0000000000000000000000000000000000000000..40164604fbd5fc23297ef14f6e9940708c44a1d7
--- /dev/null
+++ b/configs/olimex-lpc1766stk/nsh/Make.defs
@@ -0,0 +1,162 @@
+############################################################################
+# configs/olimex-lpc1766stk/nsh/Make.defs
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
+ # CodeSourcery under Windows
+ CROSSDEV = arm-none-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
+ # CodeSourcery under Linux
+ CROSSDEV = arm-none-eabi-
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LPC17_DEVKITARM),y)
+ # devkitARM under Windows
+ CROSSDEV = arm-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_BUILDROOT),y)
+ # NuttX buildroot under Linux or Cygwin
+ CROSSDEV = arm-elf-
+ ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/winlink.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/olimex-lpc1766stk/nsh/defconfig b/configs/olimex-lpc1766stk/nsh/defconfig
new file mode 100755
index 0000000000000000000000000000000000000000..35b7edc8f596411c7f7543615527281c2ee993a2
--- /dev/null
+++ b/configs/olimex-lpc1766stk/nsh/defconfig
@@ -0,0 +1,804 @@
+############################################################################
+# configs/olimex-lpc1766stk/nsh/defconfig
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+# cause a 100 second delay during boot-up. This 100 second delay
+# serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lpc17xx
+CONFIG_ARCH_CHIP_LPC1768=y
+CONFIG_ARCH_BOARD=olimex-lpc1766stk
+CONFIG_ARCH_BOARD_LPC1766STK=y
+CONFIG_BOARD_LOOPSPERMSEC=7982
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0x10000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=n
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=y
+
+#
+# Individual subsystems can be enabled:
+#
+# Individual subsystems can be enabled:
+# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+CONFIG_LPC17_ETHERNET=n
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=y
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART3_BAUD=115200
+CONFIG_UART1_BAUD=115200
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APP_DIR - Identifies the relative path to the directory
+# that builds the application to link with NuttX.
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+# debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+# or TICKS_PER_MSEC=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
+# handle delayed processing from interrupt handlers. This feature
+# is required for some drivers but, if there are not complaints,
+# can be safely disabled. The worker thread also performs
+# garbage collection -- completing any delayed memory deallocations
+# from interrupt handlers. If the worker thread is disabled,
+# then that clean will be performed by the IDLE thread instead
+# (which runs at the lowest of priority and may not be appropriate
+# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
+# is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+# thread. Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+# work in units of microseconds. Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+# the worker thread. Default: 4
+#
+CONFIG_APP_DIR=examples/nsh
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=6
+CONFIG_START_DAY=20
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=y
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+# Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+# Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+# SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+# Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+# SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+# Handle USB Start-Of-Frame events.
+# Enable reading SOF from interrupt handler vs. simply reading on demand.
+# Probably a bad idea... Unless there is some issue with sampling the SOF
+# from hardware asynchronously.
+# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+# Enable high priority interrupts. I have no idea why you might want to
+# do that
+# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+# Number of DMA descriptors to allocate in SRAM.
+# CONFIG_LPC17_USBDEV_DMA
+# Enable lpc17xx-specific DMA support
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+# Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+#
+CONFIG_USBSER=n
+CONFIG_USBSER_EPINTIN=1
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=5
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+# Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+# Select if the media is removable
+#
+CONFIG_USBSTRG=n
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=5
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for examples/nsh
+#
+# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
+# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
+# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
+# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
+# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
+# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_EXAMPLES_NSH_TELNET is selected:
+# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
+# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
+# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
+# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
+CONFIG_EXAMPLES_NSH_STRERROR=n
+CONFIG_EXAMPLES_NSH_LINELEN=64
+CONFIG_EXAMPLES_NSH_STACKSIZE=2048
+CONFIG_EXAMPLES_NSH_NESTDEPTH=3
+CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
+CONFIG_EXAMPLES_NSH_DISABLEBG=n
+CONFIG_EXAMPLES_NSH_ROMFSETC=n
+CONFIG_EXAMPLES_NSH_CONSOLE=y
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_ARCHINIT=y
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
+CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
+CONFIG_EXAMPLES_NSH_FATDEVNO=1
+CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
+CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
+CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+# Only verify IN (device-to-host) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+# Only verify OUT (host-to-device) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+# Send only small, single packet messages. Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+# Send only large, multi-packet messages. Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# (should also be =n for the LPC17xx which always runs from flash)
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/configs/olimex-lpc1766stk/nsh/ld.script b/configs/olimex-lpc1766stk/nsh/ld.script
new file mode 100755
index 0000000000000000000000000000000000000000..e271f9a996d39809fd1d30716d2b8bd611024bcb
--- /dev/null
+++ b/configs/olimex-lpc1766stk/nsh/ld.script
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/olimex-lpc1766stk/nsh/ld.script
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
+ * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
+ * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
+ * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
+ * into the 32Kb CPU SRAM address range.
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ _eronly = ABSOLUTE(.); /* See below */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } >sram
+
+ .ARM.exidx : {
+ __exidx_start = ABSOLUTE(.);
+ *(.ARM.exidx*)
+ __exidx_end = ABSOLUTE(.);
+ } >sram
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/olimex-lpc1766stk/nsh/setenv.sh b/configs/olimex-lpc1766stk/nsh/setenv.sh
new file mode 100755
index 0000000000000000000000000000000000000000..557d4ef6f7bd11dd711796a293f39b6fdefdc397
--- /dev/null
+++ b/configs/olimex-lpc1766stk/nsh/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/olimex-lpc1766stk/nsh/setenv.sh
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/configs/olimex-lpc1766stk/ostest/Make.defs b/configs/olimex-lpc1766stk/ostest/Make.defs
new file mode 100755
index 0000000000000000000000000000000000000000..4000fc404aff6318e3814e5dffa664b5d15b590c
--- /dev/null
+++ b/configs/olimex-lpc1766stk/ostest/Make.defs
@@ -0,0 +1,162 @@
+############################################################################
+# configs/olimex-lpc1766stk/ostest/Make.defs
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
+ # CodeSourcery under Windows
+ CROSSDEV = arm-none-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
+ # CodeSourcery under Linux
+ CROSSDEV = arm-none-eabi-
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LPC17_DEVKITARM),y)
+ # devkitARM under Windows
+ CROSSDEV = arm-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_BUILDROOT),y)
+ # NuttX buildroot under Linux or Cygwin
+ CROSSDEV = arm-elf-
+ ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/winlink.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/olimex-lpc1766stk/ostest/defconfig b/configs/olimex-lpc1766stk/ostest/defconfig
new file mode 100755
index 0000000000000000000000000000000000000000..8a6278db9170c327dca91653fae07ea581ccadf9
--- /dev/null
+++ b/configs/olimex-lpc1766stk/ostest/defconfig
@@ -0,0 +1,804 @@
+############################################################################
+# configs/olimex-lpc1766stk/ostest/defconfig
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+# cause a 100 second delay during boot-up. This 100 second delay
+# serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lpc17xx
+CONFIG_ARCH_CHIP_LPC1768=y
+CONFIG_ARCH_BOARD=olimex-lpc1766stk
+CONFIG_ARCH_BOARD_LPC1766STK=y
+CONFIG_BOARD_LOOPSPERMSEC=7982
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0x10000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=n
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=y
+
+#
+# Individual subsystems can be enabled:
+#
+# Individual subsystems can be enabled:
+# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+CONFIG_LPC17_ETHERNET=n
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART3_BAUD=115200
+CONFIG_UART1_BAUD=115200
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APP_DIR - Identifies the relative path to the directory
+# that builds the application to link with NuttX.
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+# debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+# or TICKS_PER_MSEC=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
+# handle delayed processing from interrupt handlers. This feature
+# is required for some drivers but, if there are not complaints,
+# can be safely disabled. The worker thread also performs
+# garbage collection -- completing any delayed memory deallocations
+# from interrupt handlers. If the worker thread is disabled,
+# then that clean will be performed by the IDLE thread instead
+# (which runs at the lowest of priority and may not be appropriate
+# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
+# is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+# thread. Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+# work in units of microseconds. Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+# the worker thread. Default: 4
+#
+CONFIG_APP_DIR=examples/ostest
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=6
+CONFIG_START_DAY=20
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+# Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+# Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+# SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+# Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+# SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+# Handle USB Start-Of-Frame events.
+# Enable reading SOF from interrupt handler vs. simply reading on demand.
+# Probably a bad idea... Unless there is some issue with sampling the SOF
+# from hardware asynchronously.
+# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+# Enable high priority interrupts. I have no idea why you might want to
+# do that
+# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+# Number of DMA descriptors to allocate in SRAM.
+# CONFIG_LPC17_USBDEV_DMA
+# Enable lpc17xx-specific DMA support
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+# Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+#
+CONFIG_USBSER=n
+CONFIG_USBSER_EPINTIN=1
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=5
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+# Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+# Select if the media is removable
+#
+CONFIG_USBSTRG=n
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=5
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for examples/nsh
+#
+# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
+# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
+# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
+# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
+# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
+# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_EXAMPLES_NSH_TELNET is selected:
+# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
+# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
+# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
+# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
+CONFIG_EXAMPLES_NSH_STRERROR=n
+CONFIG_EXAMPLES_NSH_LINELEN=64
+CONFIG_EXAMPLES_NSH_STACKSIZE=2048
+CONFIG_EXAMPLES_NSH_NESTDEPTH=3
+CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
+CONFIG_EXAMPLES_NSH_DISABLEBG=n
+CONFIG_EXAMPLES_NSH_ROMFSETC=n
+CONFIG_EXAMPLES_NSH_CONSOLE=y
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_ARCHINIT=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
+CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
+CONFIG_EXAMPLES_NSH_FATDEVNO=1
+CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
+CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
+CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+# Only verify IN (device-to-host) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+# Only verify OUT (host-to-device) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+# Send only small, single packet messages. Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+# Send only large, multi-packet messages. Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# (should also be =n for the LPC17xx which always runs from flash)
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/configs/olimex-lpc1766stk/ostest/ld.script b/configs/olimex-lpc1766stk/ostest/ld.script
new file mode 100755
index 0000000000000000000000000000000000000000..d4e64fa5f52e4f33d4e11db278a022454ad4b8d1
--- /dev/null
+++ b/configs/olimex-lpc1766stk/ostest/ld.script
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/olimex-lpc1766stk/ostest/ld.script
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
+ * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
+ * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
+ * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
+ * into the 32Kb CPU SRAM address range.
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ _eronly = ABSOLUTE(.); /* See below */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } >sram
+
+ .ARM.exidx : {
+ __exidx_start = ABSOLUTE(.);
+ *(.ARM.exidx*)
+ __exidx_end = ABSOLUTE(.);
+ } >sram
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/olimex-lpc1766stk/ostest/setenv.sh b/configs/olimex-lpc1766stk/ostest/setenv.sh
new file mode 100755
index 0000000000000000000000000000000000000000..e97d102b36181f09df13d5d504e195e22847356d
--- /dev/null
+++ b/configs/olimex-lpc1766stk/ostest/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/olimex-lpc1766stk/ostest/setenv.sh
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/configs/olimex-lpc1766stk/src/Makefile b/configs/olimex-lpc1766stk/src/Makefile
new file mode 100755
index 0000000000000000000000000000000000000000..4b4df1752e08ba7bfb2d23dd3e6e8a318d93011d
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/Makefile
@@ -0,0 +1,90 @@
+############################################################################
+# configs/olimex-lpc1766stk/src/Makefile
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS += -I$(TOPDIR)/sched
+
+ASRCS =
+CSRCS = up_boot.c up_leds.c up_ssp.c
+ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
+CSRCS += up_nsh.c
+endif
+ifeq ($(CONFIG_APP_DIR),examples/usbstorage)
+CSRCS += up_usbstrg.c
+endif
+
+AOBJS = $(ASRCS:.S=$(OBJEXT))
+COBJS = $(CSRCS:.c=$(OBJEXT))
+
+SRCS = $(ASRCS) $(CSRCS)
+OBJS = $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+ CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+ -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+ -I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
+else
+ CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+ $(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+ $(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+ @( for obj in $(OBJS) ; do \
+ $(call ARCHIVE, $@, $${obj}); \
+ done ; )
+
+.depend: Makefile $(SRCS)
+ @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+ @touch $@
+
+depend: .depend
+
+clean:
+ @rm -f libboard$(LIBEXT) *~ .*.swp
+ $(call CLEAN)
+
+distclean: clean
+ @rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h b/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
new file mode 100755
index 0000000000000000000000000000000000000000..c57a7c8f343557c70090ac0c3c9d47b50a110878
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
@@ -0,0 +1,83 @@
+/************************************************************************************
+ * configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
+ * arch/arm/src/board/lpc1766stk_internal.n
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
+#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* LPC1766-STK GPIO Pin Definitions *************************************************/
+/* Board GPIO Usage:
+ *
+ * [To be provided]
+ */
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_sspinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
+ *
+ ************************************************************************************/
+
+extern void weak_function lpc17_sspinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */
+
diff --git a/configs/olimex-lpc1766stk/src/up_boot.c b/configs/olimex-lpc1766stk/src/up_boot.c
new file mode 100755
index 0000000000000000000000000000000000000000..f3e4e10f3f112f0d7758bec469505df28a3f38ea
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/up_boot.c
@@ -0,0 +1,93 @@
+/************************************************************************************
+ * configs/olimex-lpc1766stk/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_internal.h"
+#include "lpc1766stk_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ * All LPC17xx architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void lpc17_boardinitialize(void)
+{
+ /* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
+ * function lpc17_sspinitialize() has been brought into the link.
+ */
+
+#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP0)
+ if (lpc17_sspinitialize)
+ {
+ lpc17_sspinitialize();
+ }
+#endif
+
+ /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+ up_ledinit();
+#endif
+}
diff --git a/configs/olimex-lpc1766stk/src/up_leds.c b/configs/olimex-lpc1766stk/src/up_leds.c
new file mode 100755
index 0000000000000000000000000000000000000000..0cb0b3efc57acef20af0a47f775ef58b29607f0c
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/up_leds.c
@@ -0,0 +1,134 @@
+/****************************************************************************
+ * configs/olimex-lpc1766stk/src/up_leds.c
+ * arch/arm/src/board/up_leds.c
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_internal.h"
+
+#include "lpc1766stk_internal.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG with
+ * CONFIG_DEBUG_VERBOSE too)
+ */
+
+#undef LED_DEBUG /* Define to enable debug */
+#undef LED_VERBOSE /* Define to enable verbose debug */
+
+#ifdef LED_DEBUG
+# define leddbg lldbg
+# ifdef LED_VERBOSE
+# define ledvdbg lldbg
+# else
+# define ledvdbg(x...)
+# endif
+#else
+# undef LED_VERBOSE
+# define leddbg(x...)
+# define ledvdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#ifdef LED_VERBOSE
+# define led_dumpgpio(m) lpc17_dumpgpio(???, m)
+#else
+# define led_dumpgpio(m)
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_ledinit
+ ****************************************************************************/
+
+void up_ledinit(void)
+{
+ /* Configure all LED GPIO lines */
+ led_dumpgpio("up_ledinit() Entry)");
+
+#warning "Not implemented"
+
+ led_dumpgpio("up_ledinit() Exit");
+}
+
+/****************************************************************************
+ * Name: up_ledon
+ ****************************************************************************/
+
+void up_ledon(int led)
+{
+#warning "Not implemented"
+}
+
+/****************************************************************************
+ * Name: up_ledoff
+ ****************************************************************************/
+
+void up_ledoff(int led)
+{
+#warning "Not implemented"
+}
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/configs/olimex-lpc1766stk/src/up_nsh.c b/configs/olimex-lpc1766stk/src/up_nsh.c
new file mode 100755
index 0000000000000000000000000000000000000000..16a687b07aa89d56795c57e068ff1f71d958848f
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/up_nsh.c
@@ -0,0 +1,155 @@
+/****************************************************************************
+ * config/olimex-lpc1766stk/src/up_nsh.c
+ * arch/arm/src/board/up_nsh.c
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/mmcsd.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/* PORT and SLOT number probably depend on the board configuration */
+
+#ifdef CONFIG_ARCH_BOARD_LPC1766STK
+# define CONFIG_EXAMPLES_NSH_HAVEUSBDEV 1
+# define CONFIG_EXAMPLES_NSH_HAVEMMCSD 1
+# if !defined(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO) || CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO != 0
+# error "The LPC1766-STK MMC/SD is on SSP0"
+# undef CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO
+# define CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO 0
+# endif
+# if !defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) || CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0
+# error "The LPC1766-STK MMC/SD is only one slot (0)"
+# undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
+# define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0
+# endif
+# ifndef CONFIG_LPC17_SSP0
+# warning "CONFIG_LPC17_SSP0 is not enabled"
+# endif
+#else
+# error "Unrecognized board"
+# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
+# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
+#endif
+
+/* Can't support USB features if USB is not enabled */
+
+#ifndef CONFIG_USBDEV
+# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
+#endif
+
+/* Can't support MMC/SD features if mountpoints are disabled */
+
+#if defined(CONFIG_DISABLE_MOUNTPOINT)
+# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
+#endif
+
+#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR
+# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0
+#endif
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+# ifdef CONFIG_DEBUG
+# define message(...) lib_lowprintf(__VA_ARGS__)
+# else
+# define message(...) printf(__VA_ARGS__)
+# endif
+#else
+# ifdef CONFIG_DEBUG
+# define message lib_lowprintf
+# else
+# define message printf
+# endif
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ * Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int nsh_archinitialize(void)
+{
+ FAR struct spi_dev_s *ssp;
+ int ret;
+
+ /* Get the SSP port */
+
+ ssp = up_spiinitialize(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
+ if (!ssp)
+ {
+ message("nsh_archinitialize: Failed to initialize SSP port %d\n",
+ CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
+ return -ENODEV;
+ }
+
+ message("Successfully initialized SSP port %d\n",
+ CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
+
+ /* Bind the SSP port to the slot */
+
+ ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, ssp);
+ if (ret < 0)
+ {
+ message("nsh_archinitialize: Failed to bind SSP port %d to MMC/SD slot %d: %d\n",
+ CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, ret);
+ return ret;
+ }
+
+ message("Successfuly bound SSP port %d to MMC/SD slot %d\n",
+ CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
+ return OK;
+}
diff --git a/configs/olimex-lpc1766stk/src/up_ssp.c b/configs/olimex-lpc1766stk/src/up_ssp.c
new file mode 100755
index 0000000000000000000000000000000000000000..4c23666737513812f1a49ea2ee1f2b7ea6ab409b
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/up_ssp.c
@@ -0,0 +1,159 @@
+/************************************************************************************
+ * configs/olimex-lpc1766stk/src/up_ssp.c
+ * arch/arm/src/board/up_ssp.c
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "lpc17_internal.h"
+#include "lpc1766stk_internal.h"
+
+/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
+
+#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#undef SSP_DEBUG /* Define to enable debug */
+#undef SSP_VERBOSE /* Define to enable verbose debug */
+
+#ifdef SSP_DEBUG
+# define sspdbg lldbg
+# ifdef SSP_VERBOSE
+# define sspvdbg lldbg
+# else
+# define sspvdbg(x...)
+# endif
+#else
+# undef SSP_VERBOSE
+# define sspdbg(x...)
+# define sspvdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#ifdef SSP_VERBOSE
+# define ssp_dumpgpio(m) lpc17_dumpgpio(SDCCS_GPIO, m)
+#else
+# define ssp_dumpgpio(m)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_sspinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
+ *
+ ************************************************************************************/
+
+void weak_function lpc17_sspinitialize(void)
+{
+ /* Configure the SPI chip select GPIOs */
+
+ ssp_dumpgpio("lpc17_sspinitialize() Entry)");
+#warning "Not implemented"
+ ssp_dumpgpio("lpc17_sspinitialize() Exit");
+}
+
+/************************************************************************************
+ * Name: lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
+ *
+ * Description:
+ * The external functions, lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
+ * must be provided by board-specific logic. They are implementations of the select
+ * and status methods of the SPI interface defined by struct spi_ops_s (see
+ * include/nuttx/spi.h). All other methods (including up_spiinitialize())
+ * are provided by common LPC17xx logic. To use this common SPI logic on your
+ * board:
+ *
+ * 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
+ * pins.
+ * 2. Provide lpc17_ssp0/ssp1select() and lpc17_ssp0/ssp1status() functions
+ * in your board-specific logic. These functions will perform chip selection
+ * and status operations using GPIOs in the way your board is configured.
+ * 3. Add a calls to up_spiinitialize() in your low level application
+ * initialization logic
+ * 4. The handle returned by up_spiinitialize() may then be used to bind the
+ * SPI driver to higher level logic (e.g., calling
+ * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ * the SPI MMC/SD driver).
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LPC17_SSP0
+void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+ sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+ ssp_dumpgpio("lpc17_spiselect() Entry");
+#warning "Not implemented"
+ ssp_dumpgpio("lpc17_spiselect() Exit");
+}
+
+uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+ sspdbg("Returning SPI_STATUS_PRESENT\n");
+ return SPI_STATUS_PRESENT;
+}
+#endif
+
+#ifdef CONFIG_LPC17_SSP1
+# warning "SSP1 chip selects not known"
+#endif
+
+#endif /* CONFIG_LPC17_SSP0 || CONFIG_LPC17_SSP1 */
diff --git a/configs/olimex-lpc1766stk/src/up_usbstrg.c b/configs/olimex-lpc1766stk/src/up_usbstrg.c
new file mode 100755
index 0000000000000000000000000000000000000000..c4cacddd3c3745109db2a1f03541aff4dc8317d3
--- /dev/null
+++ b/configs/olimex-lpc1766stk/src/up_usbstrg.c
@@ -0,0 +1,143 @@
+/****************************************************************************
+ * configs/olimex-lpc1766stk/src/up_usbstrg.c
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Configure and register the LPC17xx MMC/SD SPI block driver.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/mmcsd.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
+# define CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 0
+#endif
+
+/* PORT and SLOT number probably depend on the board configuration */
+
+#ifdef CONFIG_ARCH_BOARD_LPC1766STK
+# undef LPC17XX_MMCSDSPIPORTNO
+# define LPC17XX_MMCSDSPIPORTNO 1
+# undef LPC17XX_MMCSDSLOTNO
+# define LPC17XX_MMCSDSLOTNO 0
+#else
+ /* Add configuration for new LPC17xx boards here */
+# error "Unrecognized LPC17xx board"
+#endif
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+# ifdef CONFIG_DEBUG
+# define message(...) lib_lowprintf(__VA_ARGS__)
+# define msgflush()
+# else
+# define message(...) printf(__VA_ARGS__)
+# define msgflush() fflush(stdout)
+# endif
+#else
+# ifdef CONFIG_DEBUG
+# define message lib_lowprintf
+# define msgflush()
+# else
+# define message printf
+# define msgflush() fflush(stdout)
+# endif
+#endif
+
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: usbstrg_archinitialize
+ *
+ * Description:
+ * Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int usbstrg_archinitialize(void)
+{
+ FAR struct spi_dev_s *spi;
+ int ret;
+
+ /* Get the SPI port */
+
+ message("usbstrg_archinitialize: Initializing SPI port %d\n",
+ LPC17XX_MMCSDSPIPORTNO);
+
+ spi = up_spiinitialize(1);
+ if (!spi)
+ {
+ message("usbstrg_archinitialize: Failed to initialize SPI port %d\n",
+ LPC17XX_MMCSDSPIPORTNO);
+ return -ENODEV;
+ }
+
+ message("usbstrg_archinitialize: Successfully initialized SPI port %d\n",
+ LPC17XX_MMCSDSPIPORTNO);
+
+ /* Bind the SPI port to the slot */
+
+ message("usbstrg_archinitialize: Binding SPI port %d to MMC/SD slot %d\n",
+ LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
+
+ ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_USBSTRG_DEVMINOR1, LPC17XX_MMCSDSLOTNO, spi);
+ if (ret < 0)
+ {
+ message("usbstrg_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
+ LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO, ret);
+ return ret;
+ }
+
+ message("usbstrg_archinitialize: Successfuly bound SPI port %d to MMC/SD slot %d\n",
+ LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
+ return OK;
+}
diff --git a/configs/olimex-lpc1766stk/tools/olimex.cfg b/configs/olimex-lpc1766stk/tools/olimex.cfg
new file mode 100755
index 0000000000000000000000000000000000000000..6b98458e69f72c1fe647f2c1d31984843e78da25
--- /dev/null
+++ b/configs/olimex-lpc1766stk/tools/olimex.cfg
@@ -0,0 +1,61 @@
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+#interface
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG A"
+ft2232_layout "olimex-jtag"
+ft2232_vid_pid 0x15BA 0x0003
+
+# NXP LPC1768 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, clocked with 4MHz internal RC oscillator
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME lpc1768
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ set _CPUTAPID 0x4ba00477
+}
+
+#delays on reset lines
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+# LPC2000 & LPC1700 -> SRST causes TRST
+reset_config trst_and_srst srst_pulls_trst
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+# LPC1768 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
+$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0
+
+# REVISIT is there any good reason to have this reset-init event handler??
+# Normally they should set up (board-specific) clocking then probe the flash...
+$_TARGETNAME configure -event reset-init {
+ # Force NVIC.VTOR to point to flash at 0 ...
+ # WHY? This is it's reset value; we run right after reset!!
+ mwb 0xE000ED08 0x00
+}
+
+# LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region).
+# flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum]
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 80000 calc_checksum
+
+# 4MHz / 6 = 666kHz, so use 500
+jtag_khz 100
diff --git a/configs/olimex-lpc1766stk/tools/oocd.sh b/configs/olimex-lpc1766stk/tools/oocd.sh
new file mode 100755
index 0000000000000000000000000000000000000000..6f4bd604736212ceb27a378dd1592ea27a3ca221
--- /dev/null
+++ b/configs/olimex-lpc1766stk/tools/oocd.sh
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+TOPDIR=$1
+USAGE="$0 <TOPDIR> [-d]"
+if [ -z "${TOPDIR}" ]; then
+ echo "Missing argument"
+ echo $USAGE
+ exit 1
+fi
+
+OPENOCD_PATH="/cygdrive/c/OpenOCD/openocd-0.4.0/src"
+OPENOCD_EXE=openocd.exe
+OPENOCD_CFG="${TOPDIR}/configs/olimex-lpc1766stk/tools/olimex.cfg"
+OPENOCD_ARGS="-f `cygpath -w ${OPENOCD_CFG}`"
+
+if [ "X$2" = "X-d" ]; then
+ OPENOCD_ARGS=$OPENOCD_ARGS" -d3"
+ set -x
+fi
+
+if [ ! -d ${OPENOCD_PATH} ]; then
+ echo "OpenOCD path does not exist: ${OPENOCD_PATH}"
+ exit 1
+fi
+if [ ! -x ${OPENOCD_PATH}/${OPENOCD_EXE} ]; then
+ echo "OpenOCD does not exist: ${OPENOCD_PATH}/${OPENOCD_EXE}"
+ exit 1
+fi
+if [ ! -f ${OPENOCD_CFG} ]; then
+ echo "OpenOCD config file does not exist: ${OPENOCD_CFG}"
+ exit 1
+fi
+
+echo "Starting OpenOCD"
+${OPENOCD_PATH}/${OPENOCD_EXE} ${OPENOCD_ARGS} &
+echo "OpenOCD daemon started"
+ps -ef | grep openocd
+echo "In GDB: target remote localhost:3333"
+
+
+
+
diff --git a/configs/olimex-lpc1766stk/usbserial/Make.defs b/configs/olimex-lpc1766stk/usbserial/Make.defs
new file mode 100755
index 0000000000000000000000000000000000000000..e151b2ef39669fd6083508b91ef17d3dc09738de
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbserial/Make.defs
@@ -0,0 +1,162 @@
+############################################################################
+# configs/olimex-lpc1766stk/usbserial/Make.defs
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
+ # CodeSourcery under Windows
+ CROSSDEV = arm-none-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
+ # CodeSourcery under Linux
+ CROSSDEV = arm-none-eabi-
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LPC17_DEVKITARM),y)
+ # devkitARM under Windows
+ CROSSDEV = arm-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_BUILDROOT),y)
+ # NuttX buildroot under Linux or Cygwin
+ CROSSDEV = arm-elf-
+ ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/winlink.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/olimex-lpc1766stk/usbserial/defconfig b/configs/olimex-lpc1766stk/usbserial/defconfig
new file mode 100755
index 0000000000000000000000000000000000000000..23875092d0fc6cfb4c709b432f1c763a1b9de595
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbserial/defconfig
@@ -0,0 +1,848 @@
+############################################################################
+# configs/olimex-lpc1766stk/usbserial/defconfig
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+# cause a 100 second delay during boot-up. This 100 second delay
+# serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lpc17xx
+CONFIG_ARCH_CHIP_LPC1768=y
+CONFIG_ARCH_BOARD=olimex-lpc1766stk
+CONFIG_ARCH_BOARD_LPC1766STK=y
+CONFIG_BOARD_LOOPSPERMSEC=7982
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0x10000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=n
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=y
+
+#
+# Individual subsystems can be enabled:
+#
+# Individual subsystems can be enabled:
+# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+CONFIG_LPC17_ETHERNET=n
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART3_BAUD=115200
+CONFIG_UART1_BAUD=115200
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APP_DIR - Identifies the relative path to the directory
+# that builds the application to link with NuttX.
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+# debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+# or TICKS_PER_MSEC=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
+# handle delayed processing from interrupt handlers. This feature
+# is required for some drivers but, if there are not complaints,
+# can be safely disabled. The worker thread also performs
+# garbage collection -- completing any delayed memory deallocations
+# from interrupt handlers. If the worker thread is disabled,
+# then that clean will be performed by the IDLE thread instead
+# (which runs at the lowest of priority and may not be appropriate
+# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
+# is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+# thread. Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+# work in units of microseconds. Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+# the worker thread. Default: 4
+#
+CONFIG_APP_DIR=examples/usbserial
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DEBUG_USB=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=7
+CONFIG_START_DAY=15
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+# Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+# Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+# SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+# Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+# SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+#
+CONFIG_USBDEV=y
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+# Handle USB Start-Of-Frame events.
+# Enable reading SOF from interrupt handler vs. simply reading on demand.
+# Probably a bad idea... Unless there is some issue with sampling the SOF
+# from hardware asynchronously.
+# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+# Enable high priority interrupts. I have no idea why you might want to
+# do that
+# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+# Number of DMA descriptors to allocate in SRAM.
+# CONFIG_LPC17_USBDEV_DMA
+# Enable lpc17xx-specific DMA support
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+# Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+#
+CONFIG_USBSER=y
+CONFIG_USBSER_EPINTIN=1
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=5
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+# Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+# Select if the media is removable
+#
+CONFIG_USBSTRG=n
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=5
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for examples/nsh
+#
+# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
+# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
+# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
+# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
+# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
+# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_EXAMPLES_NSH_TELNET is selected:
+# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
+# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
+# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
+# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
+CONFIG_EXAMPLES_NSH_STRERROR=n
+CONFIG_EXAMPLES_NSH_LINELEN=64
+CONFIG_EXAMPLES_NSH_STACKSIZE=2048
+CONFIG_EXAMPLES_NSH_NESTDEPTH=3
+CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
+CONFIG_EXAMPLES_NSH_DISABLEBG=n
+CONFIG_EXAMPLES_NSH_ROMFSETC=n
+CONFIG_EXAMPLES_NSH_CONSOLE=y
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_ARCHINIT=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
+CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
+CONFIG_EXAMPLES_NSH_FATDEVNO=1
+CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
+CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
+CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+# Only verify IN (device-to-host) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+# Only verify OUT (host-to-device) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+# Send only small, single packet messages. Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+# Send only large, multi-packet messages. Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/usbstorage
+#
+# CONFIG_EXAMPLES_USBSTRG_NLUNS
+# Defines the number of logical units (LUNs) exported by the USB storage
+# driver. Each LUN corresponds to one exported block driver (or partition
+# of a block driver). May be 1, 2, or 3. Default is 1.
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
+# The minor device number of the block driver for the first LUN. For
+# example, N in /dev/mmcsdN. Used for registering the block driver. Default
+# is zero.
+# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
+# The full path to the registered block driver. Default is "/dev/mmcsd0"
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
+# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+# is 2 or 3. No defaults.
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
+# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+# is 3. No defaults.
+#
+# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
+# the example code will also manage the USB trace output. The amount of trace output
+# can be controlled using:
+#
+# CONFIG_EXAMPLES_USBSTRG_TRACEINIT
+# Show initialization events
+# CONFIG_EXAMPLES_USBSTRG_TRACECLASS
+# Show class driver events
+# CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
+# Show data transfer events
+# CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
+# Show controller events
+# CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
+# Show interrupt-related events.
+CONFIG_EXAMPLES_USBSTRG_NLUNS=1
+CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
+CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
+CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
+CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# (should also be =n for the LPC17xx which always runs from flash)
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/configs/olimex-lpc1766stk/usbserial/ld.script b/configs/olimex-lpc1766stk/usbserial/ld.script
new file mode 100755
index 0000000000000000000000000000000000000000..181418d54497ae02c71ee3e718f17d4034af0dd8
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbserial/ld.script
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/olimex-lpc1766stk/usbserial/ld.script
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
+ * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
+ * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
+ * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
+ * into the 32Kb CPU SRAM address range.
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ _eronly = ABSOLUTE(.); /* See below */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } >sram
+
+ .ARM.exidx : {
+ __exidx_start = ABSOLUTE(.);
+ *(.ARM.exidx*)
+ __exidx_end = ABSOLUTE(.);
+ } >sram
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/olimex-lpc1766stk/usbserial/setenv.sh b/configs/olimex-lpc1766stk/usbserial/setenv.sh
new file mode 100755
index 0000000000000000000000000000000000000000..eff7d8483b24168dace6b4a64a8a880c29d66e24
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbserial/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/olimex-lpc1766stk/usbserial/setenv.sh
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/configs/olimex-lpc1766stk/usbstorage/Make.defs b/configs/olimex-lpc1766stk/usbstorage/Make.defs
new file mode 100755
index 0000000000000000000000000000000000000000..ceeff0dc3a454b2fc826ce89b958d0bfef61d134
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbstorage/Make.defs
@@ -0,0 +1,162 @@
+############################################################################
+# configs/olimex-lpc1766stk/usbstorage/Make.defs
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
+ # CodeSourcery under Windows
+ CROSSDEV = arm-none-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
+ # CodeSourcery under Linux
+ CROSSDEV = arm-none-eabi-
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LPC17_DEVKITARM),y)
+ # devkitARM under Windows
+ CROSSDEV = arm-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_BUILDROOT),y)
+ # NuttX buildroot under Linux or Cygwin
+ CROSSDEV = arm-elf-
+ ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/winlink.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/olimex-lpc1766stk/usbstorage/defconfig b/configs/olimex-lpc1766stk/usbstorage/defconfig
new file mode 100755
index 0000000000000000000000000000000000000000..93edb0a4c5801817436675d1d9ac46680991331a
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbstorage/defconfig
@@ -0,0 +1,848 @@
+############################################################################
+# configs/olimex-lpc1766stk/usbstorage/defconfig
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+# cause a 100 second delay during boot-up. This 100 second delay
+# serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lpc17xx
+CONFIG_ARCH_CHIP_LPC1768=y
+CONFIG_ARCH_BOARD=olimex-lpc1766stk
+CONFIG_ARCH_BOARD_LPC1766STK=y
+CONFIG_BOARD_LOOPSPERMSEC=7982
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0x10000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=n
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=y
+
+#
+# Individual subsystems can be enabled:
+#
+# Individual subsystems can be enabled:
+# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+CONFIG_LPC17_ETHERNET=n
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=y
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART3_BAUD=115200
+CONFIG_UART1_BAUD=115200
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APP_DIR - Identifies the relative path to the directory
+# that builds the application to link with NuttX.
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+# debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+# or TICKS_PER_MSEC=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
+# handle delayed processing from interrupt handlers. This feature
+# is required for some drivers but, if there are not complaints,
+# can be safely disabled. The worker thread also performs
+# garbage collection -- completing any delayed memory deallocations
+# from interrupt handlers. If the worker thread is disabled,
+# then that clean will be performed by the IDLE thread instead
+# (which runs at the lowest of priority and may not be appropriate
+# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
+# is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+# thread. Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+# work in units of microseconds. Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+# the worker thread. Default: 4
+#
+CONFIG_APP_DIR=examples/usbstorage
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DDEBUG_USB=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=7
+CONFIG_START_DAY=15
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+# Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+# Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+# SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+# Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+# SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+#
+CONFIG_USBDEV=y
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+# Handle USB Start-Of-Frame events.
+# Enable reading SOF from interrupt handler vs. simply reading on demand.
+# Probably a bad idea... Unless there is some issue with sampling the SOF
+# from hardware asynchronously.
+# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+# Enable high priority interrupts. I have no idea why you might want to
+# do that
+# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+# Number of DMA descriptors to allocate in SRAM.
+# CONFIG_LPC17_USBDEV_DMA
+# Enable lpc17xx-specific DMA support
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_USBSER
+# Enable compilation of the USB serial driver
+# CONFIG_USBSER_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_USBSER_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_USBSER_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+#
+CONFIG_USBSER=n
+CONFIG_USBSER_EPINTIN=1
+CONFIG_USBSER_EPBULKOUT=2
+CONFIG_USBSER_EPBULKIN=5
+CONFIG_USBSER_NWRREQS=4
+CONFIG_USBSER_NRDREQS=4
+CONFIG_USBSER_VENDORID=0x067b
+CONFIG_USBSER_PRODUCTID=0x2303
+CONFIG_USBSER_VENDORSTR="Nuttx"
+CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
+CONFIG_USBSER_RXBUFSIZE=512
+CONFIG_USBSER_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBSTRG
+# Enable compilation of the USB storage driver
+# CONFIG_USBSTRG_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBSTRG_REMOVABLE
+# Select if the media is removable
+#
+CONFIG_USBSTRG=y
+CONFIG_USBSTRG_EP0MAXPACKET=64
+CONFIG_USBSTRG_EPBULKOUT=2
+CONFIG_USBSTRG_EPBULKIN=5
+CONFIG_USBSTRG_NRDREQS=2
+CONFIG_USBSTRG_NWRREQS=2
+CONFIG_USBSTRG_BULKINREQLEN=256
+CONFIG_USBSTRG_BULKOUTREQLEN=256
+CONFIG_USBSTRG_VENDORID=0x584e
+CONFIG_USBSTRG_VENDORSTR="NuttX"
+CONFIG_USBSTRG_PRODUCTID=0x5342
+CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
+CONFIG_USBSTRG_VERSIONNO=0x0399
+CONFIG_USBSTRG_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for examples/nsh
+#
+# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
+# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
+# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
+# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
+# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
+# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_EXAMPLES_NSH_TELNET is selected:
+# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
+# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
+# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
+# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
+CONFIG_EXAMPLES_NSH_STRERROR=n
+CONFIG_EXAMPLES_NSH_LINELEN=64
+CONFIG_EXAMPLES_NSH_STACKSIZE=2048
+CONFIG_EXAMPLES_NSH_NESTDEPTH=3
+CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
+CONFIG_EXAMPLES_NSH_DISABLEBG=n
+CONFIG_EXAMPLES_NSH_ROMFSETC=n
+CONFIG_EXAMPLES_NSH_CONSOLE=y
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_ARCHINIT=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
+CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
+CONFIG_EXAMPLES_NSH_FATDEVNO=1
+CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
+CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
+CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+# Only verify IN (device-to-host) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+# Only verify OUT (host-to-device) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+# Send only small, single packet messages. Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+# Send only large, multi-packet messages. Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/usbstorage
+#
+# CONFIG_EXAMPLES_USBSTRG_NLUNS
+# Defines the number of logical units (LUNs) exported by the USB storage
+# driver. Each LUN corresponds to one exported block driver (or partition
+# of a block driver). May be 1, 2, or 3. Default is 1.
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
+# The minor device number of the block driver for the first LUN. For
+# example, N in /dev/mmcsdN. Used for registering the block driver. Default
+# is zero.
+# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
+# The full path to the registered block driver. Default is "/dev/mmcsd0"
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
+# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+# is 2 or 3. No defaults.
+# CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
+# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
+# is 3. No defaults.
+#
+# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
+# the example code will also manage the USB trace output. The amount of trace output
+# can be controlled using:
+#
+# CONFIG_EXAMPLES_USBSTRG_TRACEINIT
+# Show initialization events
+# CONFIG_EXAMPLES_USBSTRG_TRACECLASS
+# Show class driver events
+# CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
+# Show data transfer events
+# CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
+# Show controller events
+# CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
+# Show interrupt-related events.
+CONFIG_EXAMPLES_USBSTRG_NLUNS=1
+CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
+CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
+CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
+CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# (should also be =n for the LPC17xx which always runs from flash)
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/configs/olimex-lpc1766stk/usbstorage/ld.script b/configs/olimex-lpc1766stk/usbstorage/ld.script
new file mode 100755
index 0000000000000000000000000000000000000000..25af7b76fb7c1eb81221c8b69954c0cf535f293f
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbstorage/ld.script
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/olimex-lpc1766stk/usbstorage/ld.script
+ *
+ * Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
+ * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
+ * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
+ * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
+ * into the 32Kb CPU SRAM address range.
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ _eronly = ABSOLUTE(.); /* See below */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } >sram
+
+ .ARM.exidx : {
+ __exidx_start = ABSOLUTE(.);
+ *(.ARM.exidx*)
+ __exidx_end = ABSOLUTE(.);
+ } >sram
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/olimex-lpc1766stk/usbstorage/setenv.sh b/configs/olimex-lpc1766stk/usbstorage/setenv.sh
new file mode 100755
index 0000000000000000000000000000000000000000..5c150cf07d65c6f723fc3cd0620b3b3fb7f0466a
--- /dev/null
+++ b/configs/olimex-lpc1766stk/usbstorage/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/olimex-lpc1766stk/usbstorage/setenv.sh
+#
+# Copyright (C) 2010 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"