From f153df28d30733588e98122775816a9700dfecda Mon Sep 17 00:00:00 2001
From: Gregory Nutt <gnutt@nuttx.org>
Date: Sat, 20 Jan 2018 16:16:35 -0600
Subject: [PATCH] configs/nucleo-l432kc: Fix numerous cloning errors/typos.
---
TODO | 4 ++--
configs/nucleo-l432kc/README.txt | 19 ++++++++-----------
configs/nucleo-l432kc/include/board.h | 4 ++--
3 files changed, 12 insertions(+), 15 deletions(-)
diff --git a/TODO b/TODO
index 3d92fd7ee2..19b328e54d 100644
--- a/TODO
+++ b/TODO
@@ -745,7 +745,7 @@ o Kernel/Protected Build
Title: USER MODE TASKS CAN MODIFY PRIVILEGED TASKS
Description: Certain interfaces, such as sched_setparam(),
sched_setscheduler(), etc. can be used by user mode tasks to
- modify the behavior of priviledged kernel threads.
+ modify the behavior of privileged kernel threads.
For a truly secure system. Privileges need to be checked in
every interface that permits one thread to modify the
properties of another thread.
@@ -1282,7 +1282,7 @@ o Network (net/, drivers/net)
however, because its priority is low and so it is blocked
from execution.
- In the mean time, the remote host sends a
- packet which is presumeably caught in the read-ahead buffer.
+ packet which is presumably caught in the read-ahead buffer.
- Then the remote host closes the socket. Nothing happens on
the target side because net_start_monitor() has not yet been
called.
diff --git a/configs/nucleo-l432kc/README.txt b/configs/nucleo-l432kc/README.txt
index b68e68ebbd..43eacb4391 100644
--- a/configs/nucleo-l432kc/README.txt
+++ b/configs/nucleo-l432kc/README.txt
@@ -230,12 +230,10 @@ NuttX EABI "buildroot" Toolchain
1. You must have already configured Nuttx in <some-dir>/nuttx.
- $ (cd tools; ./configure.sh nucleo-f4x1re/f401-nsh)
+ $ tools/configure.sh nucleo-f432kc/nsh
$ make qconfig
$ V=1 make context all 2>&1 | tee mout
- Use the f411-nsh configuration if you have the Nucleo-F411RE board.
-
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
@@ -298,14 +296,13 @@ NXFLAT Toolchain
mbed
====
- The Nucleo-F401RE includes boot loader from mbed:
+ The Nucleo-F432KC includes boot loader from mbed:
- https://mbed.org/platforms/ST-Nucleo-F401RE/
https://mbed.org/handbook/Homepage
Using the mbed loader:
- 1. Connect the Nucleo-F4x1RE to the host PC using the USB connector.
+ 1. Connect the Nucleo-F432kc to the host PC using the USB connector.
2. A new file system will appear called NUCLEO; open it with Windows
Explorer (assuming that you are using Windows).
3. Drag and drop nuttx.bin into the MBED window. This will load the
@@ -322,7 +319,7 @@ Hardware
LEDs
----
- The Nucleo F401RE and Nucleo F411RE provide a single user LED, LD2. LD2
+ The Nucleo F401RE and Nucleo F432KC provide a single user LED, LD2. LD2
is the green LED connected to Arduino signal D13 corresponding to MCU I/O
PB3 (pin 26).
@@ -367,7 +364,7 @@ Serial Consoles
TTL to RS-232 converter connection:
- Nucleo CN10 STM32F4x1RE
+ Nucleo CN10 STM32F432KC
----------- ------------
Pin 21 PA9 USART1_RX *Warning you make need to reverse RX/TX on
Pin 33 PA10 USART1_TX some RS-232 converters
@@ -399,7 +396,7 @@ Serial Consoles
TTL to RS-232 converter connection:
- Nucleo CN9 STM32F4x1RE
+ Nucleo CN9 STM32F432KC
----------- ------------
Pin 1 PA3 USART2_RX *Warning you make need to reverse RX/TX on
Pin 2 PA2 USART2_TX some RS-232 converters
@@ -457,7 +454,7 @@ Configurations
nsh:
---------
Configures the NuttShell (nsh) located at apps/examples/nsh for the
- Nucleo-F401RE board. The Configuration enables the serial interfaces
+ Nucleo-F432KC board. The Configuration enables the serial interfaces
on UART2. Support for builtin applications is enabled, but in the base
configuration no builtin applications are selected (see NOTES below).
@@ -484,7 +481,7 @@ Configurations
Consoles). I have been using a TTL-to-RS-232 converter connected
as shown below:
- Nucleo CN10 STM32F4x1RE
+ Nucleo CN10 STM32F432KC
----------- ------------
Pin 21 PA9 USART1_RX *Warning you make need to reverse RX/TX on
Pin 33 PA10 USART1_TX some RS-232 converters
diff --git a/configs/nucleo-l432kc/include/board.h b/configs/nucleo-l432kc/include/board.h
index 529accb653..3e7e90c453 100644
--- a/configs/nucleo-l432kc/include/board.h
+++ b/configs/nucleo-l432kc/include/board.h
@@ -146,7 +146,7 @@
/* LEDs
*
- * The Nucleo l476RG board provides a single user LED, LD2. LD2
+ * The Nucleo l432kc board provides a single user LED, LD2. LD2
* is the green LED connected to Arduino signal D13 corresponding to
* MCU I/O PB3 (pin 26).
*
@@ -266,4 +266,4 @@ void stm32l4_board_initialize(void);
#endif
#endif /* __ASSEMBLY__ */
-#endif /* __CONFIGS_NUCLEO_F476RG_INCLUDE_BOARD_H */
+#endif /* __CONFIGS_NUCLEO_F432KC_INCLUDE_BOARD_H */
--
GitLab