diff --git a/10GHz_horn/waveguide/SMA.FCStd b/10GHz_horn/waveguide/SMA.FCStd new file mode 100644 index 0000000000000000000000000000000000000000..0f94a155daa82ab056c0fccb2af283b7992f27cc Binary files /dev/null and b/10GHz_horn/waveguide/SMA.FCStd differ diff --git a/10GHz_horn/waveguide/SMA.FCStd1 b/10GHz_horn/waveguide/SMA.FCStd1 new file mode 100644 index 0000000000000000000000000000000000000000..28a5de175489b3061cd86734ce30c595f4d9bc83 Binary files /dev/null and b/10GHz_horn/waveguide/SMA.FCStd1 differ diff --git a/10GHz_horn/waveguide/Waveguide.FCStd b/10GHz_horn/waveguide/Waveguide.FCStd new file mode 100644 index 0000000000000000000000000000000000000000..b28d1ca0eed7d685f1b62bfe7313a6e25c29d435 Binary files /dev/null and b/10GHz_horn/waveguide/Waveguide.FCStd differ diff --git a/10GHz_horn/waveguide/Waveguide.FCStd1 b/10GHz_horn/waveguide/Waveguide.FCStd1 new file mode 100644 index 0000000000000000000000000000000000000000..ff19b9d34f3575a1f5380d38f35f9ab55f6511ec Binary files /dev/null and b/10GHz_horn/waveguide/Waveguide.FCStd1 differ diff --git a/10GHz_horn/waveguide/assembly.FCStd b/10GHz_horn/waveguide/assembly.FCStd new file mode 100644 index 0000000000000000000000000000000000000000..a44185825f617413c365d4ddf07a5db4aae63df6 Binary files /dev/null and b/10GHz_horn/waveguide/assembly.FCStd differ diff --git a/10GHz_horn/waveguide/assembly.FCStd1 b/10GHz_horn/waveguide/assembly.FCStd1 new file mode 100644 index 0000000000000000000000000000000000000000..1f475dee094a56010806654fbf10f3cd31942863 Binary files /dev/null and b/10GHz_horn/waveguide/assembly.FCStd1 differ diff --git a/10GHz_horn/waveguide/plan.pdf b/10GHz_horn/waveguide/plan.pdf new file mode 100644 index 0000000000000000000000000000000000000000..c5b9bc9a5f7d74cab37245e1eaa483ae8e99562d Binary files /dev/null and b/10GHz_horn/waveguide/plan.pdf differ diff --git a/aspirateur_embout/embout_plat.FCStd b/aspirateur_embout/embout_plat.FCStd new file mode 100644 index 0000000000000000000000000000000000000000..c60edd356305e4d8637001447bac2a3311b762d5 Binary files /dev/null and b/aspirateur_embout/embout_plat.FCStd differ diff --git a/aspirateur_embout/embout_plat.stl b/aspirateur_embout/embout_plat.stl new file mode 100644 index 0000000000000000000000000000000000000000..c01ef86f80eb9b91dac32e882158384089e8d6d8 Binary files /dev/null and b/aspirateur_embout/embout_plat.stl differ diff --git a/aspirateur_embout/embout_sliced.png b/aspirateur_embout/embout_sliced.png new file mode 100644 index 0000000000000000000000000000000000000000..95dfdc9c0c219e66ac2c1b11b8b5af759caf8735 Binary files /dev/null and b/aspirateur_embout/embout_sliced.png differ diff --git a/binolite/binolite.FCStd b/binolite/binolite.FCStd new file mode 100644 index 0000000000000000000000000000000000000000..bf415d73f468bdb72870c412b7e4d0432daf7ddb Binary files /dev/null and b/binolite/binolite.FCStd differ diff --git a/binolite/binolite.FCStd1 b/binolite/binolite.FCStd1 new file mode 100644 index 0000000000000000000000000000000000000000..f4b74d260e35841703aed7b3b93a860363c5ea97 Binary files /dev/null and b/binolite/binolite.FCStd1 differ diff --git a/binolite/binolite.stl b/binolite/binolite.stl new file mode 100644 index 0000000000000000000000000000000000000000..3741ae171ba69d87106ee3abdeb875fd31e0824e Binary files /dev/null and b/binolite/binolite.stl differ diff --git a/config b/config new file mode 100644 index 0000000000000000000000000000000000000000..37c24de9400753af6e099d0120da67eb6f94283e --- /dev/null +++ b/config @@ -0,0 +1,352 @@ +# Smoothieboard configuration file, see http://smoothieware.org/configuring-smoothie +# NOTE Lines must not exceed 132 characters, and '#' characters mean what follows is ignored +## Robot module configurations : general handling of movement G-codes and slicing into moves + +# Basic motion configuration +default_feed_rate 4000 # Default speed (mm/minute) for G1/G2/G3 moves +default_seek_rate 4000 # Default speed (mm/minute) for G0 moves +mm_per_arc_segment 0.0 # Fixed length for line segments that divide arcs, 0 to disable +#mm_per_line_segment 5 # Cut lines into segments this size +mm_max_arc_error 0.01 # The maximum error for line segments that divide arcs 0 to disable + # note it is invalid for both the above be 0 + # if both are used, will use largest segment length based on radius + +# Arm solution configuration : Cartesian robot. Translates mm positions into stepper positions +# See http://smoothieware.org/stepper-motors +alpha_steps_per_mm 80 # Steps per mm for alpha ( X ) stepper +beta_steps_per_mm 80 # Steps per mm for beta ( Y ) stepper +gamma_steps_per_mm 400 # Steps per mm for gamma ( Z ) stepper + +# Planner module configuration : Look-ahead and acceleration configuration +# See http://smoothieware.org/motion-control +acceleration 3000 # Acceleration in mm/second/second. +#z_acceleration 500 # Acceleration for Z only moves in mm/s^2, 0 uses acceleration which is the default. DO NOT SET ON A DELTA +junction_deviation 0.05 # See http://smoothieware.org/motion-control#junction-deviation +#z_junction_deviation 0.0 # For Z only moves, -1 uses junction_deviation, zero disables junction_deviation on z moves DO NOT SET ON A DELTA + +# Cartesian axis speed limits +x_axis_max_speed 30000 # Maximum speed in mm/min +y_axis_max_speed 30000 # Maximum speed in mm/min +z_axis_max_speed 300 # Maximum speed in mm/min + +# Stepper module configuration +# Pins are defined as ports, and pin numbers, appending "!" to the number will invert a pin +# See http://smoothieware.org/pin-configuration and http://smoothieware.org/pinout +alpha_step_pin 2.0 # Pin for alpha stepper step signal +alpha_dir_pin 0.5! # Pin for alpha stepper direction, add '!' to reverse direction +alpha_en_pin 0.4 # Pin for alpha enable pin +alpha_current 1.5 # X stepper motor current +alpha_max_rate 30000.0 # Maximum rate in mm/min + +beta_step_pin 2.1 # Pin for beta stepper step signal +beta_dir_pin 0.11 # Pin for beta stepper direction, add '!' to reverse direction +beta_en_pin 0.10 # Pin for beta enable +beta_current 1.5 # Y stepper motor current +beta_max_rate 30000.0 # Maxmimum rate in mm/min + +gamma_step_pin 2.2 # Pin for gamma stepper step signal +gamma_dir_pin 0.20 # Pin for gamma stepper direction, add '!' to reverse direction +gamma_en_pin 0.19 # Pin for gamma enable +gamma_current 1.5 # Z stepper motor current +gamma_max_rate 300.0 # Maximum rate in mm/min + +## Extruder module configuration +# See http://smoothieware.org/extruder +extruder.hotend.enable true # Whether to activate the extruder module at all. All configuration is ignored if false +extruder.hotend.steps_per_mm 837 # Steps per mm for extruder stepper +extruder.hotend.default_feed_rate 600 # Default rate ( mm/minute ) for moves where only the extruder moves +extruder.hotend.acceleration 500 # Acceleration for the stepper motor mm/sec² +extruder.hotend.max_speed 50 # Maximum speed in mm/s + +extruder.hotend.step_pin 2.3 # Pin for extruder step signal +extruder.hotend.dir_pin 0.22 # Pin for extruder dir signal ( add '!' to reverse direction ) +extruder.hotend.en_pin 0.21 # Pin for extruder enable signal + +# Extruder offset +#extruder.hotend.x_offset 0 # X offset from origin in mm +#extruder.hotend.y_offset 0 # Y offset from origin in mm +#extruder.hotend.z_offset 0 # Z offset from origin in mm + +# Firmware retract settings when using G10/G11, these are the defaults if not defined, must be defined for each extruder if not using the defaults +#extruder.hotend.retract_length 3 # Retract length in mm +#extruder.hotend.retract_feedrate 45 # Retract feedrate in mm/sec +#extruder.hotend.retract_recover_length 0 # Additional length for recover +#extruder.hotend.retract_recover_feedrate 8 # Recover feedrate in mm/sec (should be less than retract feedrate) +#extruder.hotend.retract_zlift_length 0 # Z-lift on retract in mm, 0 disables +#extruder.hotend.retract_zlift_feedrate 6000 # Z-lift feedrate in mm/min (Note mm/min NOT mm/sec) + +delta_current 1.5 # First extruder stepper motor current + +# Second extruder module configuration +#extruder.hotend2.enable true # Whether to activate the extruder module at all. All configuration is ignored if false +#extruder.hotend2.steps_per_mm 140 # Steps per mm for extruder stepper +#extruder.hotend2.default_feed_rate 600 # Default rate ( mm/minute ) for moves where only the extruder moves +#extruder.hotend2.acceleration 500 # Acceleration for the stepper motor, as of 0.6, arbitrary ratio +#extruder.hotend2.max_speed 50 # mm/s + +#extruder.hotend2.step_pin 2.8 # Pin for extruder step signal +#extruder.hotend2.dir_pin 2.13 # Pin for extruder dir signal ( add '!' to reverse direction ) +#extruder.hotend2.en_pin 4.29 # Pin for extruder enable signal + +#extruder.hotend2.x_offset 0 # x offset from origin in mm +#extruder.hotend2.y_offset 25.0 # y offset from origin in mm +#extruder.hotend2.z_offset 0 # z offset from origin in mm + +#epsilon_current 1.5 # Second extruder stepper motor current + + +## Laser module configuration +# See http://smoothieware.org/laser +laser_module_enable false # Whether to activate the laser module at all +laser_module_pwm_pin 2.5 # This pin will be PWMed to control the laser. + # Only pins 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 1.18, 1.20, 1.21, 1.23, 1.24, 1.26, 3.25 and 3.26 + # can be used since laser requires hardware PWM, see http://smoothieware.org/pinout +#laser_module_ttl_pin 1.30 # This pin turns on when the laser turns on, and off when the laser turns off. +#laser_module_maximum_power 1.0 # This is the maximum duty cycle that will be applied to the laser +#laser_module_minimum_power 0.0 # This is a value just below the minimum duty cycle that keeps the laser + # active without actually burning. +#laser_module_default_power 0.8 # This is the default laser power that will be used for cuts if a power has not been specified. The value is a scale between + # the maximum and minimum power levels specified above +#laser_module_pwm_period 20 # This sets the pwm frequency as the period in microseconds + +## Temperature control configuration +# See http://smoothieware.org/temperaturecontrol + +# First hotend configuration +temperature_control.hotend.enable true # Whether to activate this ( "hotend" ) module at all. +temperature_control.hotend.thermistor_pin 0.24 # Pin for the thermistor to read +temperature_control.hotend.heater_pin 2.5 # Pin that controls the heater, set to nc if a readonly thermistor is being defined +temperature_control.hotend.thermistor Semitec # See http://smoothieware.org/temperaturecontrol#toc5 +#temperature_control.hotend.beta 4066 # Or set the beta value +temperature_control.hotend.set_m_code 104 # M-code to set the temperature for this module +temperature_control.hotend.set_and_wait_m_code 109 # M-code to set-and-wait for this module +temperature_control.hotend.designator T # Designator letter for this module +#temperature_control.hotend.max_temp 300 # Set maximum temperature - Will prevent heating above 300 by default +#temperature_control.hotend.min_temp 0 # Set minimum temperature - Will prevent heating below if set + +# Safety control is enabled by default and can be overidden here, the values show the defaults +# See http://smoothieware.org/temperaturecontrol#runaway +#temperature_control.hotend.runaway_heating_timeout 900 # How long it can take to heat up, max is 2040 seconds. +#temperature_control.hotend.runaway_cooling_timeout 0 # How long it can take to cool down if temp is set lower, max is 2040 seconds +#temperature_control.hotend.runaway_range 20 # How far from the set temperature it can wander, max setting is 63°C + +# PID configuration +# See http://smoothieware.org/temperaturecontrol#pid +#temperature_control.hotend.p_factor 13.7 # P ( proportional ) factor +#temperature_control.hotend.i_factor 0.097 # I ( integral ) factor +#temperature_control.hotend.d_factor 24 # D ( derivative ) factor + +#temperature_control.hotend.max_pwm 64 # Max pwm, 64 is a good value if driving a 12v resistor with 24v. + +# Second hotend configuration +#temperature_control.hotend2.enable true # Whether to activate this ( "hotend" ) module at all. +#temperature_control.hotend2.thermistor_pin 0.25 # Pin for the thermistor to read +#temperature_control.hotend2.heater_pin 1.23 # Pin that controls the heater +#temperature_control.hotend2.thermistor EPCOS100K # See http://smoothieware.org/temperaturecontrol#thermistor +##temperature_control.hotend2.beta 4066 # or set the beta value +#temperature_control.hotend2.set_m_code 104 # M-code to set the temperature for this module +#temperature_control.hotend2.set_and_wait_m_code 109 # M-code to set-and-wait for this module +#temperature_control.hotend2.designator T1 # Designator letter for this module + +#temperature_control.hotend2.p_factor 13.7 # P ( proportional ) factor +#temperature_control.hotend2.i_factor 0.097 # I ( integral ) factor +#temperature_control.hotend2.d_factor 24 # D ( derivative ) factor + +#temperature_control.hotend2.max_pwm 64 # Max pwm, 64 is a good value if driving a 12v resistor with 24v. + +temperature_control.bed.enable true # Whether to activate this ( "hotend" ) module at all. +temperature_control.bed.thermistor_pin 0.23 # Pin for the thermistor to read +temperature_control.bed.heater_pin 2.7 # Pin that controls the heater +temperature_control.bed.thermistor Honeywell100K # See http://smoothieware.org/temperaturecontrol#thermistor +#temperature_control.bed.beta 3974 # Or set the beta value +temperature_control.bed.set_m_code 140 # M-code to set the temperature for this module +temperature_control.bed.set_and_wait_m_code 190 # M-code to set-and-wait for this module +temperature_control.bed.designator B # Designator letter for this module + +# Bang-bang ( simplified ) control +# See http://smoothieware.org/temperaturecontrol#bang-bang +#temperature_control.bed.bang_bang false # Set to true to use bang bang control rather than PID +#temperature_control.bed.hysteresis 2.0 # Set to the temperature in degrees C to use as hysteresis + +## Switch modules +# See http://smoothieware.org/switch + +# Switch module for fan control +switch.fan.enable true # Enable this module +switch.fan.input_on_command M106 # Command that will turn this switch on +switch.fan.input_off_command M107 # Command that will turn this switch off +switch.fan.output_pin 2.6 # Pin this module controls +switch.fan.output_type pwm # PWM output settable with S parameter in the input_on_comand +#switch.fan.max_pwm 255 # Set max pwm for the pin default is 255 + +#switch.misc.enable true # Enable this module +#switch.misc.input_on_command M42 # Command that will turn this switch on +#switch.misc.input_off_command M43 # Command that will turn this switch off +#switch.misc.output_pin 2.4 # Pin this module controls +#switch.misc.output_type digital # Digital means this is just an on or off pin + +#switch.bltouch.enable true # +#switch.bltouch.output_pin 2.4 # sw pwm can use any digital pin +#switch.bltouch.input_on_command M280 # +#switch.bltouch.input_off_command M281 # +#switch.bltouch.output_type swpwm # sw pwm must be low frequency +#switch.bltouch.pwm_period_ms 20 # 50Hz +#switch.bltouch.startup_state false # start up in the stow state +#switch.bltouch.startup_value 7.43 # On boot it will go into stow mode, also set with the M281 +#switch.bltouch.default_on_value 3.3 # if M280 is issued without S this is the value it will set it to + + +## Temperatureswitch +# See http://smoothieware.org/temperatureswitch +# Automatically toggle a switch at a specified temperature. Different ones of these may be defined to monitor different temperatures and switch different swithxes +# Useful to turn on a fan or water pump to cool the hotend +#temperatureswitch.hotend.enable true # +#temperatureswitch.hotend.designator T # first character of the temperature control designator to use as the temperature sensor to monitor +#temperatureswitch.hotend.switch misc # select which switch to use, matches the name of the defined switch +#temperatureswitch.hotend.threshold_temp 60.0 # temperature to turn on (if rising) or off the switch +#temperatureswitch.hotend.heatup_poll 15 # poll heatup at 15 sec intervals +#temperatureswitch.hotend.cooldown_poll 60 # poll cooldown at 60 sec intervals + +## Endstops +# See http://smoothieware.org/endstops +endstops_enable true # The endstop module is enabled by default and can be disabled here +#corexy_homing false # Set to true if homing on a hbot or corexy +alpha_min_endstop 1.24^! # Pin to read min endstop, add a ! to invert if endstop is NO connected to ground +#alpha_max_endstop 1.25^ # Pin to read max endstop, uncomment this and comment the above if using max endstops +alpha_homing_direction home_to_min # Or set to home_to_max and set alpha_max and uncomment the alpha_max_endstop +alpha_min 0 # This gets loaded as the current position after homing when home_to_min is set +alpha_max 200 # This gets loaded as the current position after homing when home_to_max is set +beta_min_endstop 1.26^! # Pin to read min endstop, add a ! to invert if endstop is NO connected to ground +#beta_max_endstop 1.27^ # Pin to read max endstop, uncomment this and comment the above if using max endstops +beta_homing_direction home_to_min # Or set to home_to_max and set alpha_max and uncomment the alpha_max_endstop +beta_min 0 # This gets loaded as the current position after homing when home_to_min is set +beta_max 200 # This gets loaded as the current position after homing when home_to_max is set +#gamma_min_endstop 1.28^ # Pin to read min endstop, add a ! to invert if endstop is NO connected to ground +gamma_max_endstop 1.29^ # Pin to read max endstop, uncomment this and comment the above if using max endstops +gamma_homing_direction home_to_max # Or set to home_to_max and set alpha_max and uncomment the alpha_max_endstop +gamma_min 0 # This gets loaded as the current position after homing when home_to_min is set +gamma_max 177.6 # This gets loaded as the current position after homing when home_to_max is set + +alpha_max_travel 200 # Max travel in mm for alpha/X axis when homing +beta_max_travel 200 # Max travel in mm for beta/Y axis when homing +gamma_max_travel 179.1 # Max travel in mm for gamma/Z axis when homing + +# Optional enable limit switches, actions will stop if any enabled limit switch is triggered +#alpha_limit_enable false # Set to true to enable X min and max limit switches +#beta_limit_enable false # Set to true to enable Y min and max limit switches +#gamma_limit_enable false # Set to true to enable Z min and max limit switches + +# Endstops home at their fast feedrate first, then once the endstop is found they home again at their slow feedrate for accuracy +alpha_fast_homing_rate_mm_s 50 # Alpha/X fast homing feedrate in mm/second +alpha_slow_homing_rate_mm_s 25 # Alpha/X slow homing feedrate in mm/second +beta_fast_homing_rate_mm_s 50 # Beta/Y fast homing feedrate in mm/second +beta_slow_homing_rate_mm_s 25 # Beta/Y slow homing feedrate in mm/second +gamma_fast_homing_rate_mm_s 4 # Gamma/Z fast homing feedrate in mm/second +gamma_slow_homing_rate_mm_s 2 # Gamma/Z slow homing feedrate in mm/second + +alpha_homing_retract_mm 5 # Distance to retract from the endstop after it is hit for alpha/X +beta_homing_retract_mm 5 # Distance to retract from the endstop after it is hit for beta/Y +gamma_homing_retract_mm 1 # Distance to retract from the endstop after it is hit for gamma/Z + +# Optional order in which axis will home, default is they all home at the same time, +# If this is set it will force each axis to home one at a time in the specified order +#homing_order XYZ # X axis followed by Y then Z last +#move_to_origin_after_home false # Move XY to 0,0 after homing +#endstop_debounce_count 100 # Uncomment if you get noise on your endstops, default is 100 +#endstop_debounce_ms 1 # Uncomment if you get noise on your endstops, default is 1 millisecond debounce +#home_z_first true # Uncomment and set to true to home the Z first, otherwise Z homes after XY + +# End of endstop config +# Delete the above endstop section and uncomment next line and copy and edit Snippets/abc-endstop.config file to enable endstops for ABC axis +#include abc-endstop.config + +## Z-probe +# See http://smoothieware.org/zprobe +zprobe.enable false # Set to true to enable a zprobe +zprobe.probe_pin 1.28!^ # Pin probe is attached to, if NC remove the ! +zprobe.slow_feedrate 5 # Mm/sec probe feed rate +#zprobe.debounce_ms 1 # Set if noisy +zprobe.fast_feedrate 100 # Move feedrate mm/sec +zprobe.probe_height 5 # How much above bed to start probe +#gamma_min_endstop nc # Normally 1.28. Change to nc to prevent conflict, + +# Levelling strategy +# Example for 3-point levelling strategy, see wiki documentation for other strategies +#leveling-strategy.three-point-leveling.enable true # a leveling strategy that probes three points to define a plane and keeps the Z parallel to that plane +#leveling-strategy.three-point-leveling.point1 100.0,0.0 # the first probe point (x,y) optional may be defined with M557 +#leveling-strategy.three-point-leveling.point2 200.0,200.0 # the second probe point (x,y) +#leveling-strategy.three-point-leveling.point3 0.0,200.0 # the third probe point (x,y) +#leveling-strategy.three-point-leveling.home_first true # home the XY axis before probing +#leveling-strategy.three-point-leveling.tolerance 0.03 # the probe tolerance in mm, anything less that this will be ignored, default is 0.03mm +#leveling-strategy.three-point-leveling.probe_offsets 0,0,0 # the probe offsets from nozzle, must be x,y,z, default is no offset +#leveling-strategy.three-point-leveling.save_plane false # set to true to allow the bed plane to be saved with M500 default is false + +## Panel +# See http://smoothieware.org/panel +# Please find your panel on the wiki and copy/paste the right configuration here +panel.enable false # Set to true to enable the panel code + +# Example for reprap discount GLCD +# on glcd EXP1 is to left and EXP2 is to right, pin 1 is bottom left, pin 2 is top left etc. +# +5v is EXP1 pin 10, Gnd is EXP1 pin 9 +#panel.lcd reprap_discount_glcd # +#panel.spi_channel 0 # SPI channel to use ; GLCD EXP1 Pins 3,5 (MOSI, SCLK) +#panel.spi_cs_pin 0.16 # SPI chip select ; GLCD EXP1 Pin 4 +#panel.encoder_a_pin 3.25!^ # Encoder pin ; GLCD EXP2 Pin 3 +#panel.encoder_b_pin 3.26!^ # Encoder pin ; GLCD EXP2 Pin 5 +#panel.click_button_pin 1.30!^ # Click button ; GLCD EXP1 Pin 2 +#panel.buzz_pin 1.31 # Pin for buzzer ; GLCD EXP1 Pin 1 +#panel.back_button_pin 2.11!^ # Back button ; GLCD EXP2 Pin 8 + +panel.menu_offset 0 # Some panels will need 1 here + +panel.alpha_jog_feedrate 6000 # X jogging feedrate in mm/min +panel.beta_jog_feedrate 6000 # Y jogging feedrate in mm/min +panel.gamma_jog_feedrate 200 # Z jogging feedrate in mm/min + +panel.hotend_temperature 185 # Temp to set hotend when preheat is selected +panel.bed_temperature 60 # Temp to set bed when preheat is selected + +## Custom menus : Example of a custom menu entry, which will show up in the Custom entry. +# NOTE _ gets converted to space in the menu and commands, | is used to separate multiple commands +custom_menu.power_on.enable true # +custom_menu.power_on.name Power_on # +custom_menu.power_on.command M80 # + +custom_menu.power_off.enable true # +custom_menu.power_off.name Power_off # +custom_menu.power_off.command M81 # + + +## Network settings +# See http://smoothieware.org/network +network.enable false # Enable the ethernet network services +network.webserver.enable true # Enable the webserver +network.telnet.enable true # Enable the telnet server +network.ip_address auto # Use dhcp to get ip address +# Uncomment the 3 below to manually setup ip address +#network.ip_address 192.168.3.222 # The IP address +#network.ip_mask 255.255.255.0 # The ip mask +#network.ip_gateway 192.168.3.1 # The gateway address +#network.mac_override xx.xx.xx.xx.xx.xx # Override the mac address, only do this if you have a conflict + +## System configuration +# Serial communications configuration ( baud rate defaults to 9600 if undefined ) +# For communication over the UART port, *not* the USB/Serial port +uart0.baud_rate 115200 # Baud rate for the default hardware ( UART ) serial port + +second_usb_serial_enable false # This enables a second USB serial port +#leds_disable true # Disable using leds after config loaded +#play_led_disable true # Disable the play led + +# Kill button maybe assigned to a different pin, set to the onboard pin by default +# See http://smoothieware.org/killbutton +kill_button_enable true # Set to true to enable a kill button +kill_button_pin 2.12 # Kill button pin. default is same as pause button 2.12 (2.11 is another good choice) + +#msd_disable false # Disable the MSD (USB SDCARD), see http://smoothieware.org/troubleshooting#disable-msd +#dfu_enable false # For linux developers, set to true to enable DFU + +# Only needed on a smoothieboard +# See http://smoothieware.org/currentcontrol +currentcontrol_module_enable true # Control stepper motor current via the configuration file diff --git a/toolpost/8x8x80_hss.FCStd b/toolpost/8x8x80_hss.FCStd new file mode 100755 index 0000000000000000000000000000000000000000..a54efc88034a2b09dd86fe907d3dd7b83b5e703f Binary files /dev/null and b/toolpost/8x8x80_hss.FCStd differ diff --git a/toolpost/8x8x80_hss.FCStd1 b/toolpost/8x8x80_hss.FCStd1 new file mode 100755 index 0000000000000000000000000000000000000000..76f40722f5b4d5d0c0c8d4966ea684c2b3b761a3 Binary files /dev/null and b/toolpost/8x8x80_hss.FCStd1 differ diff --git a/toolpost/Horn_B105.0012.01.FCStd b/toolpost/Horn_B105.0012.01.FCStd new file mode 100755 index 0000000000000000000000000000000000000000..a0bc163a05e10f8655d8fc488d8ad31f1b504206 Binary files /dev/null and b/toolpost/Horn_B105.0012.01.FCStd differ diff --git a/toolpost/Horn_B105.0012.01.FCStd1 b/toolpost/Horn_B105.0012.01.FCStd1 new file mode 100755 index 0000000000000000000000000000000000000000..e2244fa48fcb626a3ad2f7bb1c8eee975368ada4 Binary files /dev/null and b/toolpost/Horn_B105.0012.01.FCStd1 differ diff --git a/toolpost/M6x20.FCStd b/toolpost/M6x20.FCStd new file mode 100755 index 0000000000000000000000000000000000000000..e41668b3ccc06a62389300b09565d06a464daead Binary files /dev/null and b/toolpost/M6x20.FCStd differ diff --git a/toolpost/proxxon_asm.FCStd b/toolpost/proxxon_asm.FCStd new file mode 100755 index 0000000000000000000000000000000000000000..b5a504ebf5663037a7166eafd9f80be72e15796a Binary files /dev/null and b/toolpost/proxxon_asm.FCStd differ diff --git a/toolpost/proxxon_asm.FCStd1 b/toolpost/proxxon_asm.FCStd1 new file mode 100755 index 0000000000000000000000000000000000000000..f41e8472eb272efdeaae7603b55019f03bb7a429 Binary files /dev/null and b/toolpost/proxxon_asm.FCStd1 differ diff --git a/toolpost/proxxon_custom _hornmini_12x12.FCStd b/toolpost/proxxon_custom _hornmini_12x12.FCStd new file mode 100644 index 0000000000000000000000000000000000000000..9653df87b06a89bfdc2dd6d7903e7ea4213d5582 Binary files /dev/null and b/toolpost/proxxon_custom _hornmini_12x12.FCStd differ diff --git a/toolpost/proxxon_custom _hornmini_12x12.FCStd1 b/toolpost/proxxon_custom _hornmini_12x12.FCStd1 new file mode 100755 index 0000000000000000000000000000000000000000..2f15779ca60149cde71ca275f661fe47dc00e9dd Binary files /dev/null and b/toolpost/proxxon_custom _hornmini_12x12.FCStd1 differ diff --git a/toolpost/proxxon_default_tp.FCStd b/toolpost/proxxon_default_tp.FCStd new file mode 100755 index 0000000000000000000000000000000000000000..b20201342a243bfe2a287aa16670bc2fc5daaa92 Binary files /dev/null and b/toolpost/proxxon_default_tp.FCStd differ diff --git a/toolpost/proxxon_default_tp.FCStd1 b/toolpost/proxxon_default_tp.FCStd1 new file mode 100755 index 0000000000000000000000000000000000000000..cc8f6c23f7e739aac62ae00c9b8a38e7888284a0 Binary files /dev/null and b/toolpost/proxxon_default_tp.FCStd1 differ