Newer
Older
# Logiciel UVSQsatDecoder
## Contexte
**UVSQsatDecoder** helps to decode data from **UVSQsat** Satellite and send them to databases (SatNogs & AMSAT-F)
## Téléchargement
The software can be downloaded :
### Windows
* [UVSQsatDecoderWithJRE.zip](https://site.amsat-f.org/download/117659/)
* [UVSQsatDecoderWithJRE.gz](https://site.amsat-f.org/download/117663/)
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
## Prerequisite
in order to decode data, you need to have the following assets:
* one receiver
* BPSK GR3UH 1200 and BPSK GR3UH 9600 bauds demodulator with TCP KISS interface ( [Soundmodem](http://uz7.ho.ua/packetradio.htm)
## Installation
After downloaded the sofware :
### Windows
Select the UVSQsatDecoderWithJRE.zip file and uncompress it.
### Linux
Uncompress the file with the following command :
tar -xzvf UVSQsatDecoderWithJRE.gz
## Running software
In the software directory :
### pour windows
* clic twice on "launchUVSQsatDecoder.bat "
* or launch the script in widows cmd console
launchUVSQsatDecoder.bat
### pour linux
* launch the script :
LanchUVSQsatDecoder.sh
After few seconds, the software display :
## configuration needed to send data
Selectionnez l'onglet Configuration
1: allows you to indicate your callsign
2: Allows you to indicate the latitude of the station in XX.XXS format for South or XX.XXN for North.
3: Allows you to indicate the longitude of the station in XX.XXE format for East or XX.XXW for West
4: if the box is checked, the frame sending to the Aamsat-F database will be enabled. Data in 2,3 and 5 will be used.
5: text used in the SIDS protocol to identify the source
6: If the box is checked, the frame sending to the SatnoGs database will be enabled. Data in 2,3 and 7 will be used
7: text used in the SIDS protocol to identify the source
8: Saves the configuration in a text file located in the Config. The configuration is taken into account immediately.
When you running the software the next time, the same configuration is used
## Modem connection and send data to data base
4: if the software has access to the Internet, it will look for the latest information and indicate if a new version is available. The assignment of the TLE Number will be automatically updated.
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
1: IP address of the soundmodem, by default localhost
2: Port, default 8100
3: Start allows you to connect to Soundmodem. Soundmodem must have been launched before.
Pressing the start button 3 starts the connection with the modem
1 : the result of the connection is displayed
* Connected to modem : the connection is made, the software is ready to receive a frame
* TCP DISCONNECTED: the connection has been interrupted, no possibility to connect to modem. Verified that modem is running and configured correctly
2 : The Stop button stops the connection with modem. This will be effective after receiving a frame
3 : Allows you to save the received frames in a file. It is saved in the data directory at the root where the software was installed.
## Question
A dedicated folder on AMSAT-Francophone forum is set : [Rubrique UVSQsatDecoder](http://forum.amsat-f.org/forumdisplay.php?fid=36)
## License
[GNU Lesser General Public License v2.1](http://choosealicense.com/licenses/lgpl-2.1/)