Newer
Older
# Open-source solder station for Weller RT series soldering tips
Hardware part
***
This project is an open-source solder station for use with the Weller RT series soldering tips. This is based on a previous kit designed by membres of the asociation Electrolab.
[Previous project on the Electrolab Wiki](https://wiki.electrolab.fr/Projets:SolderStationWEnglish)
[Repository of the legacy project (HW)](https://github.com/F6ITU/solderstation)
As stated in the Electrolab Wiki, this project was inspired by other projects, namely the [SMD Soldering Station from Martin Kumm](http://www.martin-kumm.de/wiki/doku.php?id=05Misc:SMD_Solderstation) and [Selbstau einer SMD-Lötstation from DL4JAL ("Yet Another SMD Solder Station")](https://www.dl4jal.de/smd_loetstation/smd_loetst.html).
The goal of this project is to update this project regarding actual CAD tools, technology and components availability.
## Description
This project is a soldering station circuit for use with the [Weller RT series soldering tips](https://www.weller-tools.com/nocompromise/). These tips are disposable integrated soldering tips that include the heating element as well as a temperature sensor, it connects to the iron through a stereo jack 3.5mm and uses low-voltage (12V), making them perfectly fitted for a DIY use.
The circuit will manage the regulation of the tip temperature and provide a HMI. On the original project, the regulation is managed by an Arduino Nano board, and the circuit is separated in two PCBs:
- A main PCB with with the regulation board, analog temperature measurement, power supply and power switching for the heating element,
- A HMI PCB with the display (3 x 7-segment LED display + 5mm LED) and controls (two push buttons or rotary encoder).
This repository will contain a renewed version of this legacy architecture, as well as eventual branches with other variants.
### [Legacy](https://code.electrolab.fr/Flax/solderstationmk2_hw/-/tree/Legacy)
Based on the original hardware from F6ITU, re-created in Kicad 7.0 from the ground up. This variant aims at being as close as possible to the original design, with integration of the corrections on equipped board.
### [Flax_variant](https://code.electrolab.fr/Flax/solderstationmk2_hw/-/tree/Flax_variant)
Single PCB, smaller 7 segment display, additional I²C connector for eventual extensions, designed for use with ST Nucleo STM32L011K4.
### [PICLight_variant](https://code.electrolab.fr/Flax/solderstationmk2_hw/-/tree/PICLight_variant)
Single PCB, no 7-segment display, no encoder, temperature set with single potentiometer, based on PIC12F1572, double implantatio for SMD and through-hole components.
### [PICLight_THT_variant](https://code.electrolab.fr/Flax/solderstationmk2_hw/-/tree/PICLight_THT_variant)
Same as PIC_variant, only through-hole components present, aligned on 2.54mm grid for easier manual building on veroboard.
## Embedded software
See the corresponding SW repo : [SolderStationMk2_SW](https://code.electrolab.fr/Flax/solderstationmk2_sw)
The legacy code for Arduino will be taken from the [original Github repo](https://github.com/diorcety/SolderStation), it will be used as base for further developments.
## Tools
- [Kicad 7.0](https://www.kicad.org/download/)
- [LTSpice 17.1.8](https://www.analog.com/en/design-center/design-tools-and-calculators/ltspice-simulator.html)