kondia-b500.cps

    } else {
      writeWords(arguments);
    }
  }
}

validate(settings.comments, "Setting 'comments' is required but not defined.");
function formatComment(text) {
  var prefix = settings.comments.prefix;
  var suffix = settings.comments.suffix;
  text = settings.comments.upperCase ? text.toUpperCase() : text;
  text = filterText(String(text), settings.comments.permittedCommentChars).replace(/[()]/g, "");
  text = String(text).substring(0, settings.comments.maximumLineLength - prefix.length - suffix.length);
  return text != "" ?  prefix + text + suffix : "";
}

/**
  Output a comment.
*/
function writeComment(text) {
  if (!text) {
    return;
  }
  var comments = String(text).split("\n");
  for (comment in comments) {
    var _comment = formatComment(comments[comment]);
    if (_comment) {
      writeln(_comment);
    }
  }
}

function onComment(text) {
  writeComment(text);
}

/**
  Writes the specified block - used for tool changes only.
*/
function writeToolBlock() {
  var show = getProperty("showSequenceNumbers");
  setProperty("showSequenceNumbers", (show == "true" || show == "toolChange") ? "true" : "false");
  writeBlock(arguments);
  setProperty("showSequenceNumbers", show);
}

var skipBlocks = false;
function writeStartBlocks(isRequired, code) {
  var safeSkipBlocks = skipBlocks;
  if (!isRequired) {
    if (!getProperty("safeStartAllOperations", false)) {
      return; // when safeStartAllOperations is disabled, dont output code and return
    }
    // if values are not required, but safe start is enabled - write following blocks as optional
    skipBlocks = true;
  }
  code(); // writes out the code which is passed to this function as an argument
  skipBlocks = safeSkipBlocks; // restore skipBlocks value
}

var pendingRadiusCompensation = -1;
function onRadiusCompensation() {
  pendingRadiusCompensation = radiusCompensation;
  if (pendingRadiusCompensation >= 0 && !getSetting("supportsRadiusCompensation", true)) {
    error(localize("Radius compensation mode is not supported."));
    return;
  }
}

function onPassThrough(text) {
  var commands = String(text).split(",");
  for (text in commands) {
    writeBlock(commands[text]);
  }
}

function forceModals() {
  if (arguments.length == 0) { // reset all modal variables listed below
    if (typeof gMotionModal != "undefined") {
      gMotionModal.reset();
    }
    if (typeof gPlaneModal != "undefined") {
      gPlaneModal.reset();
    }
    if (typeof gAbsIncModal != "undefined") {
      gAbsIncModal.reset();
    }
    if (typeof gFeedModeModal != "undefined") {
      gFeedModeModal.reset();
    }
  } else {
    for (var i in arguments) {
      arguments[i].reset(); // only reset the modal variable passed to this function
    }
  }
}

/** Helper function to be able to use a default value for settings which do not exist. */
function getSetting(setting, defaultValue) {
  var result = defaultValue;
  var keys = setting.split(".");
  var obj = settings;
  for (var i in keys) {
    if (obj[keys[i]] != undefined) { // setting does exist
      result = obj[keys[i]];
      if (typeof [keys[i]] === "object") {
        obj = obj[keys[i]];
        continue;
      }
    } else { // setting does not exist, use default value
      if (defaultValue != undefined) {
        result = defaultValue;
      } else {
        error("Setting '" + keys[i] + "' has no default value and/or does not exist.");
        return undefined;
      }
    }
  }
  return result;
}

function getRetractParameters() {
  var words = []; // store all retracted axes in an array
  var retractAxes = new Array(false, false, false);
  var method = getProperty("safePositionMethod", "undefined");
  if (method == "clearanceHeight") {
    if (!is3D()) {
      error(localize("Safe retract option 'Clearance Height' is only supported when all operations are along the setup Z-axis."));
    }
    return undefined;
  }
  validate(settings.retract, "Setting 'retract' is required but not defined.");
  validate(arguments.length != 0, "No axis specified for getRetractParameters().");

  for (i in arguments) {
    retractAxes[arguments[i]] = true;
  }
  if ((retractAxes[0] || retractAxes[1]) && !retracted) { // retract Z first before moving to X/Y home
    error(localize("Retracting in X/Y is not possible without being retracted in Z."));
    return undefined;
  }
  // special conditions
  if (retractAxes[0] || retractAxes[1]) {
    method = getSetting("retract.methodXY", method);
  }
  if (retractAxes[2]) {
    method = getSetting("retract.methodZ", method);
  }
  // define home positions
  var useZeroValues = (settings.retract.useZeroValues && settings.retract.useZeroValues.indexOf(method) != -1);
  var _xHome = machineConfiguration.hasHomePositionX() && !useZeroValues ? machineConfiguration.getHomePositionX() : toPreciseUnit(0, MM);
  var _yHome = machineConfiguration.hasHomePositionY() && !useZeroValues ? machineConfiguration.getHomePositionY() : toPreciseUnit(0, MM);
  var _zHome = machineConfiguration.getRetractPlane() != 0 && !useZeroValues ? machineConfiguration.getRetractPlane() : toPreciseUnit(0, MM);
  for (var i = 0; i < arguments.length; ++i) {
    switch (arguments[i]) {
    case X:
      words.push("X" + xyzFormat.format(_xHome));
      xOutput.reset();
      break;
    case Y:
      words.push("Y" + xyzFormat.format(_yHome));
      yOutput.reset();
      break;
    case Z:
      words.push("Z" + xyzFormat.format(_zHome));
      zOutput.reset();
      retracted = (typeof skipBlocks == "undefined") ? true : !skipBlocks;
      break;
    default:
      error(localize("Unsupported axis specified for getRetractParameters()."));
      return undefined;
    }
  }
  return {method:method, retractAxes:retractAxes, words:words};
}

/** Returns true when subprogram logic does exist into the post. */
function subprogramsAreSupported() {
  return typeof subprogramState != "undefined";
}
// <<<<< INCLUDED FROM include_files/commonFunctions.cpi
// >>>>> INCLUDED FROM include_files/defineMachine.cpi
var compensateToolLength = false; // add the tool length to the pivot distance for nonTCP rotary heads
function defineMachine() {
  var useTCP = true;
  if (false) { // note: setup your machine here
    var aAxis = createAxis({coordinate:0, table:true, axis:[1, 0, 0], range:[-120, 120], preference:1, tcp:useTCP});
    var cAxis = createAxis({coordinate:2, table:true, axis:[0, 0, 1], range:[-360, 360], preference:0, tcp:useTCP});
    machineConfiguration = new MachineConfiguration(aAxis, cAxis);

    setMachineConfiguration(machineConfiguration);
    if (receivedMachineConfiguration) {
      warning(localize("The provided CAM machine configuration is overwritten by the postprocessor."));
      receivedMachineConfiguration = false; // CAM provided machine configuration is overwritten
    }
  }

  if (!receivedMachineConfiguration) {
    // multiaxis settings
    if (machineConfiguration.isHeadConfiguration()) {
      machineConfiguration.setVirtualTooltip(false); // translate the pivot point to the virtual tool tip for nonTCP rotary heads
    }

    // retract / reconfigure
    var performRewinds = false; // set to true to enable the rewind/reconfigure logic
    if (performRewinds) {
      machineConfiguration.enableMachineRewinds(); // enables the retract/reconfigure logic
      safeRetractDistance = (unit == IN) ? 1 : 25; // additional distance to retract out of stock, can be overridden with a property
      safeRetractFeed = (unit == IN) ? 20 : 500; // retract feed rate
      safePlungeFeed = (unit == IN) ? 10 : 250; // plunge feed rate
      machineConfiguration.setSafeRetractDistance(safeRetractDistance);
      machineConfiguration.setSafeRetractFeedrate(safeRetractFeed);
      machineConfiguration.setSafePlungeFeedrate(safePlungeFeed);
      var stockExpansion = new Vector(toPreciseUnit(0.1, IN), toPreciseUnit(0.1, IN), toPreciseUnit(0.1, IN)); // expand stock XYZ values
      machineConfiguration.setRewindStockExpansion(stockExpansion);
    }

    // multi-axis feedrates
    if (machineConfiguration.isMultiAxisConfiguration()) {
      machineConfiguration.setMultiAxisFeedrate(
        useTCP ? FEED_FPM : getProperty("useDPMFeeds") ? FEED_DPM : FEED_INVERSE_TIME,
        9999.99, // maximum output value for inverse time feed rates
        getProperty("useDPMFeeds") ? DPM_COMBINATION : INVERSE_MINUTES, // INVERSE_MINUTES/INVERSE_SECONDS or DPM_COMBINATION/DPM_STANDARD
        0.5, // tolerance to determine when the DPM feed has changed
        1.0 // ratio of rotary accuracy to linear accuracy for DPM calculations
      );
      setMachineConfiguration(machineConfiguration);
    }

    /* home positions */
    // machineConfiguration.setHomePositionX(toPreciseUnit(0, IN));
    // machineConfiguration.setHomePositionY(toPreciseUnit(0, IN));
    // machineConfiguration.setRetractPlane(toPreciseUnit(0, IN));
  }
}
// <<<<< INCLUDED FROM include_files/defineMachine.cpi
// >>>>> INCLUDED FROM include_files/defineWorkPlane.cpi
validate(settings.workPlaneMethod, "Setting 'workPlaneMethod' is required but not defined.");
function defineWorkPlane(_section, _setWorkPlane) {
  var abc = new Vector(0, 0, 0);
  if (settings.workPlaneMethod.forceMultiAxisIndexing || !is3D() || machineConfiguration.isMultiAxisConfiguration()) {
    if (isPolarModeActive()) {
      abc = getCurrentDirection();
    } else if (_section.isMultiAxis()) {
      forceWorkPlane();
      cancelTransformation();
      abc = _section.isOptimizedForMachine() ? _section.getInitialToolAxisABC() : _section.getGlobalInitialToolAxis();
    } else if (settings.workPlaneMethod.useTiltedWorkplane && settings.workPlaneMethod.eulerConvention != undefined) {
      if (settings.workPlaneMethod.eulerCalculationMethod == "machine" && machineConfiguration.isMultiAxisConfiguration()) {
        abc = machineConfiguration.getOrientation(getWorkPlaneMachineABC(_section, true)).getEuler2(settings.workPlaneMethod.eulerConvention);
      } else {
        abc = _section.workPlane.getEuler2(settings.workPlaneMethod.eulerConvention);
      }
    } else {
      abc = getWorkPlaneMachineABC(_section, true);
    }

    if (_setWorkPlane) {
      if (_section.isMultiAxis() || isPolarModeActive()) { // 4-5x simultaneous operations
        cancelWorkPlane();
        positionABC(abc, true);
      } else { // 3x and/or 3+2x operations
        setWorkPlane(abc);
      }
    }
  } else {
    var remaining = _section.workPlane;
    if (!isSameDirection(remaining.forward, new Vector(0, 0, 1))) {
      error(localize("Tool orientation is not supported."));
      return abc;
    }
    setRotation(remaining);
  }
  if (currentSection && (currentSection.getId() == _section.getId())) {
    tcp.isSupportedByOperation = currentSection.getOptimizedTCPMode() == OPTIMIZE_NONE;
    if (!currentSection.isMultiAxis() && (settings.workPlaneMethod.useTiltedWorkplane || isSameDirection(machineConfiguration.getSpindleAxis(), currentSection.workPlane.forward))) {
      tcp.isSupportedByOperation = false;
    }
  }
  return abc;
}
// <<<<< INCLUDED FROM include_files/defineWorkPlane.cpi
// >>>>> INCLUDED FROM include_files/getWorkPlaneMachineABC.cpi
validate(settings.machineAngles, "Setting 'machineAngles' is required but not defined.");
function getWorkPlaneMachineABC(_section, rotate) {
  var currentABC = isFirstSection() ? new Vector(0, 0, 0) : getCurrentDirection();
  var abc = machineConfiguration.getABCByPreference(_section.workPlane, currentABC, settings.machineAngles.controllingAxis, settings.machineAngles.type, settings.machineAngles.options);
  if (!isSameDirection(machineConfiguration.getDirection(abc), _section.workPlane.forward)) {
    error(localize("Orientation not supported."));
  }
  if (rotate) {
    if (settings.workPlaneMethod.optimizeType == undefined || settings.workPlaneMethod.useTiltedWorkplane) { // legacy
      var useTCP = false;
      var R = machineConfiguration.getRemainingOrientation(abc, _section.workPlane);
      setRotation(useTCP ? _section.workPlane : R);
      setCurrentDirection(currentABC); // temporary fix for currentDirection
    } else {
      if (!_section.isOptimizedForMachine()) {
        machineConfiguration.setToolLength(compensateToolLength ? _section.getTool().overallLength : 0); // define the tool length for head adjustments
        _section.optimize3DPositionsByMachine(machineConfiguration, abc, settings.workPlaneMethod.optimizeType);
      }
    }
  }
  return abc;
}
// <<<<< INCLUDED FROM include_files/getWorkPlaneMachineABC.cpi
// >>>>> INCLUDED FROM include_files/positionABC.cpi
function positionABC(abc, force) {
  if (typeof unwindABC == "function") {
    unwindABC(abc);
  }
  if (force) {
    forceABC();
  }
  var a = machineConfiguration.isMultiAxisConfiguration() ? aOutput.format(abc.x) : toolVectorOutputI.format(abc.x);
  var b = machineConfiguration.isMultiAxisConfiguration() ? bOutput.format(abc.y) : toolVectorOutputJ.format(abc.y);
  var c = machineConfiguration.isMultiAxisConfiguration() ? cOutput.format(abc.z) : toolVectorOutputK.format(abc.z);
  if (a || b || c) {
    if (!retracted) {
      if (typeof moveToSafeRetractPosition == "function") {
        moveToSafeRetractPosition();
      } else {
        writeRetract(Z);
      }
    }
    onCommand(COMMAND_UNLOCK_MULTI_AXIS);
    gMotionModal.reset();
    writeBlock(gMotionModal.format(0), a, b, c);

    if (getCurrentSectionId() != -1) {
      setCurrentABC(abc); // required for machine simulation
    }
  }
}
// <<<<< INCLUDED FROM include_files/positionABC.cpi
// >>>>> INCLUDED FROM include_files/writeWCS.cpi
function writeWCS(section, wcsIsRequired) {
  if (section.workOffset != currentWorkOffset) {
    if (getSetting("workPlaneMethod.cancelTiltFirst", false) && wcsIsRequired) {
      cancelWorkPlane();
    }
    if (typeof forceWorkPlane == "function" && wcsIsRequired) {
      forceWorkPlane();
    }
    writeStartBlocks(wcsIsRequired, function () {
      writeBlock(section.wcs);
    });
    currentWorkOffset = section.workOffset;
  }
}
// <<<<< INCLUDED FROM include_files/writeWCS.cpi
// >>>>> INCLUDED FROM include_files/writeToolCall.cpi
function writeToolCall(tool, insertToolCall) {
  if (typeof forceModals == "function" && (insertToolCall || getProperty("safeStartAllOperations"))) {
    forceModals();
  }
  writeStartBlocks(insertToolCall, function () {
    if (!retracted) {
      writeRetract(Z);
    }
    if (!isFirstSection() && insertToolCall) {
      if (typeof forceWorkPlane == "function") {
        forceWorkPlane();
      }
      onCommand(COMMAND_COOLANT_OFF); // turn off coolant on tool change
      if (typeof disableLengthCompensation == "function") {
        disableLengthCompensation(false);
      }
    }

    if (tool.manualToolChange) {
      onCommand(COMMAND_STOP);
      writeComment("MANUAL TOOL CHANGE TO T" + toolFormat.format(tool.number));
    } else {
      if (!isFirstSection() && getProperty("optionalStop") && insertToolCall) {
        onCommand(COMMAND_OPTIONAL_STOP);
      }
      onCommand(COMMAND_LOAD_TOOL);
    }
  });
}
// <<<<< INCLUDED FROM include_files/writeToolCall.cpi
// >>>>> INCLUDED FROM include_files/startSpindle.cpi

function startSpindle(tool, insertToolCall) {
  if (tool.type != TOOL_PROBE) {
    var spindleSpeedIsRequired = insertToolCall || forceSpindleSpeed || isFirstSection() ||
      rpmFormat.areDifferent(spindleSpeed, sOutput.getCurrent()) ||
      (tool.clockwise != getPreviousSection().getTool().clockwise);

    writeStartBlocks(spindleSpeedIsRequired, function () {
      if (spindleSpeedIsRequired || operationNeedsSafeStart) {
        onCommand(COMMAND_START_SPINDLE);
      }
    });
  }
}
// <<<<< INCLUDED FROM include_files/startSpindle.cpi
// >>>>> INCLUDED FROM include_files/coolant.cpi
var currentCoolantMode = COOLANT_OFF;
var coolantOff = undefined;
var isOptionalCoolant = false;
var forceCoolant = false;

function setCoolant(coolant) {
  var coolantCodes = getCoolantCodes(coolant);
  if (Array.isArray(coolantCodes)) {
    writeStartBlocks(!isOptionalCoolant, function () {
      if (settings.coolant.singleLineCoolant) {
        writeBlock(coolantCodes.join(getWordSeparator()));
      } else {
        for (var c in coolantCodes) {
          writeBlock(coolantCodes[c]);
        }
      }
    });
    return undefined;
  }
  return coolantCodes;
}

function getCoolantCodes(coolant, format) {
  isOptionalCoolant = false;
  if (typeof operationNeedsSafeStart == "undefined") {
    operationNeedsSafeStart = false;
  }
  var multipleCoolantBlocks = new Array(); // create a formatted array to be passed into the outputted line
  var coolants = settings.coolant.coolants;
  if (!coolants) {
    error(localize("Coolants have not been defined."));
  }
  if (tool.type && tool.type == TOOL_PROBE) { // avoid coolant output for probing
    coolant = COOLANT_OFF;
  }
  if (coolant == currentCoolantMode) {
    if (operationNeedsSafeStart && coolant != COOLANT_OFF) {
      isOptionalCoolant = true;
    } else if (!forceCoolant || coolant == COOLANT_OFF) {
      return undefined; // coolant is already active
    }
  }
  if ((coolant != COOLANT_OFF) && (currentCoolantMode != COOLANT_OFF) && (coolantOff != undefined) && !forceCoolant && !isOptionalCoolant) {
    if (Array.isArray(coolantOff)) {
      for (var i in coolantOff) {
        multipleCoolantBlocks.push(coolantOff[i]);
      }
    } else {
      multipleCoolantBlocks.push(coolantOff);
    }
  }
  forceCoolant = false;

  var m;
  var coolantCodes = {};
  for (var c in coolants) { // find required coolant codes into the coolants array
    if (coolants[c].id == coolant) {
      coolantCodes.on = coolants[c].on;
      if (coolants[c].off != undefined) {
        coolantCodes.off = coolants[c].off;
        break;
      } else {
        for (var i in coolants) {
          if (coolants[i].id == COOLANT_OFF) {
            coolantCodes.off = coolants[i].off;
            break;
          }
        }
      }
    }
  }
  if (coolant == COOLANT_OFF) {
    m = !coolantOff ? coolantCodes.off : coolantOff; // use the default coolant off command when an 'off' value is not specified
  } else {
    coolantOff = coolantCodes.off;
    m = coolantCodes.on;
  }

  if (!m) {
    onUnsupportedCoolant(coolant);
    m = 9;
  } else {
    if (Array.isArray(m)) {
      for (var i in m) {
        multipleCoolantBlocks.push(m[i]);
      }
    } else {
      multipleCoolantBlocks.push(m);
    }
    currentCoolantMode = coolant;
    for (var i in multipleCoolantBlocks) {
      if (typeof multipleCoolantBlocks[i] == "number") {
        multipleCoolantBlocks[i] = mFormat.format(multipleCoolantBlocks[i]);
      }
    }
    if (format == undefined || format) {
      return multipleCoolantBlocks; // return the single formatted coolant value
    } else {
      return m; // return unformatted coolant value
    }
  }
  return undefined;
}
// <<<<< INCLUDED FROM include_files/coolant.cpi
// >>>>> INCLUDED FROM include_files/writeProgramHeader.cpi
function writeProgramHeader() {
  // dump machine configuration
  var vendor = machineConfiguration.getVendor();
  var model = machineConfiguration.getModel();
  var mDescription = machineConfiguration.getDescription();
  if (getProperty("writeMachine") && (vendor || model || mDescription)) {
    writeComment(localize("Machine"));
    if (vendor) {
      writeComment("  " + localize("vendor") + ": " + vendor);
    }
    if (model) {
      writeComment("  " + localize("model") + ": " + model);
    }
    if (mDescription) {
      writeComment("  " + localize("description") + ": "  + mDescription);
    }
  }

  // dump tool information
  if (getProperty("writeTools")) {
    if (false) { // set to true to use the post kernel version of the tool list
      writeToolTable(TOOL_NUMBER_COL);
    } else {
      var zRanges = {};
      if (is3D()) {
        var numberOfSections = getNumberOfSections();
        for (var i = 0; i < numberOfSections; ++i) {
          var section = getSection(i);
          var zRange = section.getGlobalZRange();
          var tool = section.getTool();
          if (zRanges[tool.number]) {
            zRanges[tool.number].expandToRange(zRange);
          } else {
            zRanges[tool.number] = zRange;
          }
        }
      }
      var tools = getToolTable();
      if (tools.getNumberOfTools() > 0) {
        for (var i = 0; i < tools.getNumberOfTools(); ++i) {
          var tool = tools.getTool(i);
          var comment = "T" + toolFormat.format(tool.number) + " " +
          "D=" + xyzFormat.format(tool.diameter) + " " +
          localize("CR") + "=" + xyzFormat.format(tool.cornerRadius);
          if ((tool.taperAngle > 0) && (tool.taperAngle < Math.PI)) {
            comment += " " + localize("TAPER") + "=" + taperFormat.format(tool.taperAngle) + localize("deg");
          }
          if (zRanges[tool.number]) {
            comment += " - " + localize("ZMIN") + "=" + xyzFormat.format(zRanges[tool.number].getMinimum());
          }
          comment += " - " + getToolTypeName(tool.type);
          writeComment(comment);
        }
      }
    }
  }
}
// <<<<< INCLUDED FROM include_files/writeProgramHeader.cpi

// >>>>> INCLUDED FROM include_files/onRapid_fanuc.cpi
function onRapid(_x, _y, _z) {
  var x = xOutput.format(_x);
  var y = yOutput.format(_y);
  var z = zOutput.format(_z);
  if (x || y || z) {
    if (pendingRadiusCompensation >= 0) {
      error(localize("Radius compensation mode cannot be changed at rapid traversal."));
      return;
    }
    writeBlock(gMotionModal.format(0), x, y, z);
    forceFeed();
  }
}
// <<<<< INCLUDED FROM include_files/onRapid_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onRapid5D_fanuc.cpi
function onRapid5D(_x, _y, _z, _a, _b, _c) {
  if (pendingRadiusCompensation >= 0) {
    error(localize("Radius compensation mode cannot be changed at rapid traversal."));
    return;
  }
  if (!currentSection.isOptimizedForMachine()) {
    forceXYZ();
  }
  var x = xOutput.format(_x);
  var y = yOutput.format(_y);
  var z = zOutput.format(_z);
  var a = currentSection.isOptimizedForMachine() ? aOutput.format(_a) : toolVectorOutputI.format(_a);
  var b = currentSection.isOptimizedForMachine() ? bOutput.format(_b) : toolVectorOutputJ.format(_b);
  var c = currentSection.isOptimizedForMachine() ? cOutput.format(_c) : toolVectorOutputK.format(_c);

  if (x || y || z || a || b || c) {
    writeBlock(gMotionModal.format(0), x, y, z, a, b, c);
    forceFeed();
  }
}
// <<<<< INCLUDED FROM include_files/onRapid5D_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onLinear5D_fanuc.cpi
function onLinear5D(_x, _y, _z, _a, _b, _c, feed, feedMode) {
  if (pendingRadiusCompensation >= 0) {
    error(localize("Radius compensation cannot be activated/deactivated for 5-axis move."));
    return;
  }
  if (!currentSection.isOptimizedForMachine()) {
    forceXYZ();
  }
  var x = xOutput.format(_x);
  var y = yOutput.format(_y);
  var z = zOutput.format(_z);
  var a = currentSection.isOptimizedForMachine() ? aOutput.format(_a) : toolVectorOutputI.format(_a);
  var b = currentSection.isOptimizedForMachine() ? bOutput.format(_b) : toolVectorOutputJ.format(_b);
  var c = currentSection.isOptimizedForMachine() ? cOutput.format(_c) : toolVectorOutputK.format(_c);
  if (feedMode == FEED_INVERSE_TIME) {
    forceFeed();
  }
  var f = feedMode == FEED_INVERSE_TIME ? inverseTimeOutput.format(feed) : getFeed(feed);
  var fMode = feedMode == FEED_INVERSE_TIME ? 93 : getProperty("useG95") ? 95 : 94;

  if (x || y || z || a || b || c) {
    writeBlock(gFeedModeModal.format(fMode), gMotionModal.format(1), x, y, z, a, b, c, f);
  } else if (f) {
    if (getNextRecord().isMotion()) { // try not to output feed without motion
      forceFeed(); // force feed on next line
    } else {
      writeBlock(gFeedModeModal.format(fMode), gMotionModal.format(1), f);
    }
  }
}
// <<<<< INCLUDED FROM include_files/onLinear5D_fanuc.cpi
// >>>>> INCLUDED FROM include_files/workPlaneFunctions_fanuc.cpi
var currentWorkPlaneABC = undefined;
function forceWorkPlane() {
  currentWorkPlaneABC = undefined;
}

function cancelWorkPlane(force) {
  if (typeof gRotationModal != "undefined") {
    if (force) {
      gRotationModal.reset();
    }
    writeBlock(gRotationModal.format(69)); // cancel frame
  }
  forceWorkPlane();
}

function setWorkPlane(abc) {
  if (!settings.workPlaneMethod.forceMultiAxisIndexing && is3D() && !machineConfiguration.isMultiAxisConfiguration()) {
    return; // ignore
  }
  var workplaneIsRequired = (currentWorkPlaneABC == undefined) ||
    abcFormat.areDifferent(abc.x, currentWorkPlaneABC.x) ||
    abcFormat.areDifferent(abc.y, currentWorkPlaneABC.y) ||
    abcFormat.areDifferent(abc.z, currentWorkPlaneABC.z);

  writeStartBlocks(workplaneIsRequired, function () {
    if (!retracted) {
      writeRetract(Z);
    }

    if (settings.workPlaneMethod.useTiltedWorkplane) {
      onCommand(COMMAND_UNLOCK_MULTI_AXIS);
      if (settings.workPlaneMethod.cancelTiltFirst) {
        cancelWorkPlane();
      }
      if (machineConfiguration.isMultiAxisConfiguration()) {
        var machineABC = abc.isNonZero() ? (currentSection.isMultiAxis() ? getCurrentDirection() : getWorkPlaneMachineABC(currentSection, false)) : abc;
        if (settings.workPlaneMethod.useABCPrepositioning || machineABC.isZero()) {
          positionABC(machineABC, false);
        } else {
          setCurrentABC(machineABC);
        }
      }
      if (abc.isNonZero()) {
        gRotationModal.reset();
        writeBlock(
          gRotationModal.format(68.2), "X" + xyzFormat.format(currentSection.workOrigin.x), "Y" + xyzFormat.format(currentSection.workOrigin.y), "Z" + xyzFormat.format(currentSection.workOrigin.z),
          "I" + abcFormat.format(abc.x), "J" + abcFormat.format(abc.y), "K" + abcFormat.format(abc.z)
        ); // set frame
        writeBlock(gFormat.format(53.1)); // turn machine
      } else {
        if (!settings.workPlaneMethod.cancelTiltFirst) {
          cancelWorkPlane();
        }
      }
    } else {
      positionABC(abc, true);
    }
    if (!currentSection.isMultiAxis()) {
      onCommand(COMMAND_LOCK_MULTI_AXIS);
    }
    currentWorkPlaneABC = abc;
  });
}
// <<<<< INCLUDED FROM include_files/workPlaneFunctions_fanuc.cpi
// >>>>> INCLUDED FROM include_files/initialPositioning_fanuc.cpi
/**
 * Writes the initial positioning procedure for a section to get to the start position of the toolpath.
 * @param {Vector} position The initial position to move to
 * @param {boolean} isRequired true: Output full positioning, false: Output full positioning in optional state or output simple positioning only
 * @param {String} codes1 Allows to add additional code to the first positioning line
 * @param {String} codes2 Allows to add additional code to the second positioning line (if applicable)
 * @example
  var myVar1 = formatWords("T" + tool.number, currentSection.wcs);
  var myVar2 = getCoolantCodes(tool.coolant);
  writeInitialPositioning(initialPosition, isRequired, myVar1, myVar2);
*/
function writeInitialPositioning(position, isRequired, codes1, codes2) {
  var motionCode = (highFeedMapping != HIGH_FEED_NO_MAPPING) ? 1 : 0;
  var feed = (highFeedMapping != HIGH_FEED_NO_MAPPING) ? getFeed(highFeedrate) : "";
  var gOffset = getSetting("outputToolLengthCompensation", true) ? gFormat.format(getOffsetCode()) : "";
  var hOffset = getSetting("outputToolLengthOffset", true) ? hFormat.format(tool.lengthOffset) : "";
  var additionalCodes = [formatWords(codes1), formatWords(codes2)];

  forceModals(gMotionModal);
  writeStartBlocks(isRequired, function() {
    var modalCodes = formatWords(gAbsIncModal.format(90), gPlaneModal.format(17));
    if (typeof disableLengthCompensation == "function") {
      disableLengthCompensation(false); // cancel tool length compensation prior to enabling it, required when switching G43/G43.4 modes
    }

    // multi axis prepositioning with TWP
    if (currentSection.isMultiAxis() && getSetting("workPlaneMethod.prepositionWithTWP", true) && getSetting("workPlaneMethod.useTiltedWorkplane", false) &&
      tcp.isSupportedByOperation && getCurrentDirection().isNonZero()) {
      var W = machineConfiguration.isMultiAxisConfiguration() ? machineConfiguration.getOrientation(getCurrentDirection()) :
        Matrix.getOrientationFromDirection(getCurrentDirection());
      var prePosition = W.getTransposed().multiply(position);
      var angles = W.getEuler2(settings.workPlaneMethod.eulerConvention);
      setWorkPlane(angles);
      writeBlock(modalCodes, gMotionModal.format(motionCode), xOutput.format(prePosition.x), yOutput.format(prePosition.y), feed, additionalCodes[0]);
      cancelWorkPlane();
      writeBlock(gOffset, hOffset, additionalCodes[1]); // omit Z-axis output is desired
      lengthCompensationActive = true;
      forceAny(); // required to output XYZ coordinates in the following line
    } else {
      if (machineConfiguration.isHeadConfiguration()) {
        writeBlock(modalCodes, gMotionModal.format(motionCode), gOffset,
          xOutput.format(position.x), yOutput.format(position.y), zOutput.format(position.z),
          hOffset, feed, additionalCodes
        );
      } else {
        writeBlock(modalCodes, gMotionModal.format(motionCode), xOutput.format(position.x), yOutput.format(position.y), feed, additionalCodes[0]);
        writeBlock(gMotionModal.format(motionCode), gOffset, zOutput.format(position.z), hOffset, additionalCodes[1]);
      }
      lengthCompensationActive = true;
    }
    forceModals(gMotionModal);
    if (isRequired) {
      additionalCodes = []; // clear additionalCodes buffer
    }
  });

  validate(lengthCompensationActive, "Tool length compensation is not active."); // make sure that lenght compensation is enabled
  if (!isRequired) { // simple positioning
    var modalCodes = formatWords(gAbsIncModal.format(90), gPlaneModal.format(17));
    if (!retracted && xyzFormat.getResultingValue(getCurrentPosition().z) < xyzFormat.getResultingValue(position.z)) {
      writeBlock(modalCodes, gMotionModal.format(motionCode), zOutput.format(position.z), feed);
    }
    forceXYZ();
    writeBlock(modalCodes, gMotionModal.format(motionCode), xOutput.format(position.x), yOutput.format(position.y), feed, additionalCodes);
  }
}

Matrix.getOrientationFromDirection = function (ijk) {
  var forward = ijk;
  var unitZ = new Vector(0, 0, 1);
  var W;
  if (Math.abs(Vector.dot(forward, unitZ)) < 0.5) {
    var imX = Vector.cross(forward, unitZ).getNormalized();
    W = new Matrix(imX, Vector.cross(forward, imX), forward);
  } else {
    var imX = Vector.cross(new Vector(0, 1, 0), forward).getNormalized();
    W = new Matrix(imX, Vector.cross(forward, imX), forward);
  }
  return W;
};
// <<<<< INCLUDED FROM include_files/initialPositioning_fanuc.cpi
// >>>>> INCLUDED FROM include_files/getOffsetCode_fanuc.cpi
function getOffsetCode() {
  // assumes a head configuration uses TCP on a Fanuc controller
  var offsetCode = 43;
  if (currentSection.isMultiAxis()) {
    if (machineConfiguration.isMultiAxisConfiguration() && tcp.isSupportedByOperation) {
      offsetCode = 43.4;
    } else if (!machineConfiguration.isMultiAxisConfiguration()) {
      offsetCode = 43.5;
    }
  }
  return offsetCode;
}
// <<<<< INCLUDED FROM include_files/getOffsetCode_fanuc.cpi