kondia-b500.cps

/**
  Copyright (C) 2012-2022 by Autodesk, Inc.
  All rights reserved.

  NUM post processor configuration.

  $Revision: 43811 9402f830a000e97e8885d344dcc12dc65bf77998 $
  $Date: 2022-05-20 14:56:40 $

  FORKID {8B1FC740-38BD-4cb2-9CD5-94A55CBE87A5}
*/

description = "NUM";
vendor = "NUM";
vendorUrl = "http://www.num.com";
legal = "Copyright (C) 2012-2022 by Autodesk, Inc.";
certificationLevel = 2;
minimumRevision = 45702;

longDescription = "Generic milling post for NUM.";

extension = "nc";
programNameIsInteger = true;
setCodePage("ascii");

capabilities = CAPABILITY_MILLING;
tolerance = spatial(0.002, MM);

minimumChordLength = spatial(0.25, MM);
minimumCircularRadius = spatial(0.01, MM);
maximumCircularRadius = spatial(1000, MM);
minimumCircularSweep = toRad(0.01);
maximumCircularSweep = toRad(5400);
allowHelicalMoves = true;
allowedCircularPlanes = undefined; // allow any circular motion

// user-defined properties
properties = {
  writeMachine: {
    title      : "Write machine",
    description: "Output the machine settings in the header of the code.",
    group      : "formats",
    type       : "boolean",
    value      : true,
    scope      : "post"
  },
  writeTools: {
    title      : "Write tool list",
    description: "Output a tool list in the header of the code.",
    group      : "formats",
    type       : "boolean",
    value      : true,
    scope      : "post"
  },
  preloadTool: {
    title      : "Preload tool",
    description: "Preloads the next tool at a tool change (if any).",
    group      : "preferences",
    type       : "boolean",
    value      : true,
    scope      : "post"
  },
  showSequenceNumbers: {
    title      : "Use sequence numbers",
    description: "'Yes' outputs sequence numbers on each block, 'Only on tool change' outputs sequence numbers on tool change blocks only, and 'No' disables the output of sequence numbers.",
    group      : "formats",
    type       : "enum",
    values     : [
      {title:"Yes", id:"true"},
      {title:"No", id:"false"},
      {title:"Only on tool change", id:"toolChange"}
    ],
    value: "true",
    scope: "post"
  },
  sequenceNumberStart: {
    title      : "Start sequence number",
    description: "The number at which to start the sequence numbers.",
    group      : "formats",
    type       : "integer",
    value      : 10,
    scope      : "post"
  },
  sequenceNumberIncrement: {
    title      : "Sequence number increment",
    description: "The amount by which the sequence number is incremented by in each block.",
    group      : "formats",
    type       : "integer",
    value      : 5,
    scope      : "post"
  },
  optionalStop: {
    title      : "Optional stop",
    description: "Outputs optional stop code during when necessary in the code.",
    group      : "preferences",
    type       : "boolean",
    value      : true,
    scope      : "post"
  },
  separateWordsWithSpace: {
    title      : "Separate words with space",
    description: "Adds spaces between words if 'yes' is selected.",
    group      : "formats",
    type       : "boolean",
    value      : true,
    scope      : "post"
  },
  useRadius: {
    title      : "Radius arcs",
    description: "If yes is selected, arcs are outputted using radius values rather than IJK.",
    group      : "preferences",
    type       : "boolean",
    value      : true,
    scope      : "post"
  },
  showNotes: {
    title      : "Show notes",
    description: "Writes operation notes as comments in the outputted code.",
    group      : "formats",
    type       : "boolean",
    value      : false,
    scope      : "post"
  },
  safePositionMethod: {
    title      : "Safe Retracts",
    description: "Select your desired retract option. 'Clearance Height' retracts to the operation clearance height.",
    group      : "homePositions",
    type       : "enum",
    values     : [
      {title:"Clearance Height", id:"clearanceHeight"},
      {title:"G52", id:"G52"}
    ],
    value: "G52",
    scope: "post"
  },
  controllerType: {
    title      : "Controller version",
    description: "Select the family of controller.",
    group      : "configuration",
    type       : "enum",
    values     : [
      {title:"NUM 7xx", id:"NUM7x0"},
      {title:"NUM 10xx", id:"NUM10x0"}
    ],
    value: "NUM7x0",
    scope: "post"
  }
};

// wcs definiton
wcsDefinitions = {
  useZeroOffset: false,
  wcs          : [
    {name:"Standard", format:"#", range:[1, 1]}
  ]
};

var permittedCommentChars = " ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.,=_-";

var singleLineCoolant = false; // specifies to output multiple coolant codes in one line rather than in separate lines
// samples:
// {id: COOLANT_THROUGH_TOOL, on: 88, off: 89}
// {id: COOLANT_THROUGH_TOOL, on: [8, 88], off: [9, 89]}
// {id: COOLANT_THROUGH_TOOL, on: "M88 P3 (myComment)", off: "M89"}
var coolants = [
  {id:COOLANT_FLOOD, on:8},
  {id:COOLANT_MIST},
  {id:COOLANT_THROUGH_TOOL, on:7},
  {id:COOLANT_AIR},
  {id:COOLANT_AIR_THROUGH_TOOL},
  {id:COOLANT_SUCTION},
  {id:COOLANT_FLOOD_MIST},
  {id:COOLANT_FLOOD_THROUGH_TOOL},
  {id:COOLANT_OFF, off:9}
];

var gFormat = createFormat({prefix:"G", width:2, zeropad:true, decimals:0});
var mFormat = createFormat({prefix:"M", width:2, zeropad:true, decimals:0});
var hFormat = createFormat({prefix:"H", width:2, zeropad:true, decimals:0});
var dFormat = createFormat({prefix:"D", width:2, zeropad:true, decimals:0});

var xyzFormat = createFormat({decimals:(unit == MM ? 3 : 4), forceDecimal:true});
var rFormat = xyzFormat; // radius
var abcFormat = createFormat({decimals:3, forceDecimal:true, scale:DEG});
var feedFormat = createFormat({decimals:(unit == MM ? 0 : 1), forceDecimal:true});
var toolFormat = createFormat({width:2, zeropad:true, decimals:0});
var rpmFormat = createFormat({decimals:0});
var secFormat = createFormat({decimals:2, forceDecimal:true}); // seconds - range 0.01-99.99
var taperFormat = createFormat({decimals:1, scale:DEG});

var xOutput = createVariable({prefix:"X"}, xyzFormat);
var yOutput = createVariable({prefix:"Y"}, xyzFormat);
var zOutput = createVariable({onchange:function () {retracted = false;}, prefix:"Z"}, xyzFormat);
var aOutput = createVariable({prefix:"A"}, abcFormat);
var bOutput = createVariable({prefix:"B"}, abcFormat);
var cOutput = createVariable({prefix:"C"}, abcFormat);
var feedOutput = createVariable({prefix:"F"}, feedFormat);
var sOutput = createVariable({prefix:"S", force:true}, rpmFormat);
var dOutput = createVariable({}, dFormat);