ReleaseNotes

      - Fixed an error in the FAT logic that can cause file corruption.  The
        error conditions are rare and only seen with very large files (from
        Andrew Tridgell).  This replaces a previous, partial fix for the same
        problem.
      - Fixed memory leaks in the NXFFS open() and stat() implementations
        (from Lzyy).
      - The interfaces include opendir(), readdir(), et al, were modified so
        that errors will not be reported if you attempt to list a empty
        pseudo-directory.

    * Networking:

      - Fix one place where the connection reference count was not being
        decremented in the socket close() logic.  This is really a cosmetic
        change BUT when CONFIG_DEBUG_NET is enabled, it will cause assertions.
      - Backed out a small part of the NuttX 6.33 write buffering changed.
        David G says that this causes problems in connecting to a server.
      - In DHCPD, there was a place where the logic was calling ntohl()
        inappropriately; the address was already in the correct order.  How
        could DHCPD have worked with this bug?

    * TI Tiva/Stellaris Drivers:

      - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
        the LM4F120 Launchpad.
      - Fixed several errors there were unmasked with UARTs > UART2 are
        enabled (grom Gosha).

    * Allwinner A10 Drivers:

      - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
        the pcDuino.

    * NXP LPC17xx Drivers:

      - Fix an compilation error that crept into the LPC17xx USB host driver.

    * STMicro STM32 Drivers:

      - Fix cloned typo in the serial driver:  FLOWCONTROL vs FLOWCONROL.
      - Disable SPI before changing DPI CR1 register (from David Sidrane).
      - stm32 TIM: Set the timer CCMR when selecting timer channel.  From
        David Sidrane.
      - Fix typo in a Makefile: stm32_pwm.c not stm32_psm.c.  Noted by Max
        Kriegleder.

    * Library:

      - More sscanf()  bug fixes from David Sidrane.

    * Header files:

      - cstdbool:  Ignore _Bool8 if CONFIG_C99_BOOL8=y

    * Configuration/Build System:

      - Several changes to restore the broken native Windows build

    * NuttShell (NSH):

      - Use strncpy vs strcpy in the Telnet console logic to avoid
        overruning the username and password buffers (from Bertold Van den
        Bergh).
      - Add a newline after printing the file in the 'cat' command.  This
        prevents the NSH prompt from be in the same line as the final line
        of the file in the case where there is no newline at the end of the
        file.

NuttX-7.2
---------

The 102nd release of NuttX, Version 7.2, was made on April 29, 2014,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-7.2.tar.gz and
apps-7.2.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * Core OS:

      - Add support for CLOCK_REALTIME.  From Macs N.

    * Network Utilities:

      - Add a very primitive NTP client.
      - DNS resolver:  Long needed major clean up for coding style and
        unification of naming conventions (resolv vs dns).

    * Common Drivers:

      - Add a new MTD driver that can be used to contain another driver and
        force its apparent sector size to be 512 bytes.
      - If DCD can support queuing of stall requests, then the USB MSC stall
        work around delays are not necessary.
      - Redesign threading module used with the USB MSC driver.  It was using
        pthreads before and these were changed to a kernel thread.  The reason
        for this has to do with task grouping:  A pthread is a memory of the
        group of the task that started it.  A kernel thread is independent of
        the task that started in (other than knowing it as the parent).  This
        allows me to remove so kludge logic to "deparent" the pthread on
        startup.
      - Update the MIO183QT-9A LCD driver to support reading from the LCD.
        From Toby Duckworth.
      - Timer "upper half" driver and l"lower half" interface definition from
        Bob Doiron.

    * Atmel SAM4E/4S Board Support:

      - All SAM4E configurations updated to run with 120MHz CPU speed and
        with the CMCC enabled.
      - Support for the SAM4S Xplained Pro board from Bob Doiron.
      - Add watchdog driver.  From Bob Doiron.

    * Atmel SAM4E/4S Drivers:

      - Add a USB full speed device driver (UDP) for the SAM4E.
      - Add support in HSMCI and SPI drivers to invalidate cached memory if
        the CMCC is enabled.
      - Add logic to handle SPI word widths > 8
      - Port RTC driver from SAMA5 to SAM3/4.  From Bob Doiron.
      - HSMCI:  Extensions from Bob Doiron needed to support PDC-based HSMCI
        DMA transfers.  Verified on the SAM4S Xplained Pro.

    * Atmel SAMA5:

      - Add support for the SAMA5D36 chip.
      - Add functions to calculate PLLACK, PCK, and MCK frequencies given
        the main clock frequency.
      - Implemented RAM functions.  When booting directly into NOR flash,
        reconfiguring the PLL while executing out of NOR FLASH causes
        crashes.  This was fixed by David Sidrane by implementing RAM
        functions. The killer code is copied and executed from ISRAM and
        the crash is avoided.

    * Atmel SAMA5 Drivers:

      - Add support for the SAMA5D3 DBGU.

    * Atmel SAMA5 Board Support:

      - Add a board support configuration for the Atmel SAMA5D3 Xplained
        board running out of SDRAM.  When booting from SDRAM, start-up logic
        needd to query the PMC registers to determine the MCK, PCK, etc.
      - For all SAMA5 boards, added support for 528MHz clocking.

    * TI Tiva/Stellaris:

      - Modify the logic to disables the interrupts and sets the default
        interrupt priority so that it uses the ICTR to get the number of
        interrupt lines/registers.  This is instead of using some fixed
        number of initializations based a priori knowledge of the number
        of interrupt lines in the MCU.

    * STMicro STM32

      - Add support for the STM401RE.  From Frank Bennett.

    * STMicro STM32 Boards:

      - STM32F4Discovery:  Add support to register keyboard and mouse
        classes if so configured.  From Leo.
      - Add support for the Nucleo-F401RE board.  From Frank Bennett.

    * STMicro STM32 Drivers:

      - Add STM32 Ethernet IGMP hashing support.  From Manuel Stühn.
      - OTG FS Host:  USB host tracing added by Leo.

    * Freescale Kinetis

      - Modify the logic to disables the interrupts and sets the default
        interrupt priority so that it uses the ICTR to get the number of
        interrupt lines/registers.  This is instead of using some fixed
        number of initializations based a priori knowledge of the number
        of interrupt lines in the MCU.

    * NXP LPC17xx

      - Modify the logic to disables the interrupts and sets the default
        interrupt priority so that it uses the ICTR to get the number of
        interrupt lines/registers.  This is instead of using some fixed
        number of initializations based a priori knowledge of the number
        of interrupt lines in the MCU.

    * ZiLOG ZNEO Drivers

      - Added ZNEO ESPI driver.

    * Library:

      - Finish incomplete support for ferror().  From Macs N.

    * Documentation:

      - UsbTrace.html:  Add some discussion of the USB monitor.

    * Configuration/Build System:

      - compiler.h:  Add macro UNUSED() that can be used to eliminate
        warnings about variables that are set to values that are not
        used.

    * Debugging Support:

      - Add a configuration option to enable dumping of the USB trace buffer
        on assertion.

    * Applications:

      - IGMP Example:  Fill out Kconfig file; update makefile so that the
        IGMP example can be used as an NSH built-in application. From Manuel
        Stühn.
      - lcdrw Example:  Fill out empty Kconfig file.
      - touchscreen Example:  Add a configuration option to indicate if
        architecture-specific initialized is required, yes or no.
      - System usbmsc:  Back out the USBMSC daemon... it is no longer needed
        with the recent fix to the USBMSC class driver.
      - NSH: malloc/free IOBUFFER for 'cat' and 'hexdump' commands instead of
        using the stack.  From Bob Doiron.
      - cpuhog, serialblaster, and serialrx Examples:  Stress test examples
        added by Bob Doiron.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Core OS:

      - errno_get_errno_ptr() and getpid():  Add some checks.  If these
        functions are called very early in initialization before the tasking
        structures are initialized, they would not behave properly.

    * Networking:

      - IGMP-related bug fixes from Manuel Stühn.
      - In netdev_findbyaddr(), skip network devices that are in the "down"
        state.  It does not make sense to consider an address match with a
        "down" device.  From Brennan Ashton.

    * Network Utilities:

      - DHCPD:  The correct value of the PAD option.  Should be zero, not
        one.  From Brennan Ashton.
      - Corrections to the NTP client from Manuel Stuehn.

    * Common Drivers:

      - usbhost.h:  Fix some USB HID-related conditional compilation.  From Leo.
      - USB HID mouse driver: Don't include NAKs from the device in the error
        count.  From Leo.

    * TI Tiva/Stellaris:

      - Add corrected control logic for TM4C125GXL based on logic from Daniel
        Carvalho with modifications.  The LM4F120 also works well with this
        change.

    * STMicro STM32 Drivers:

      - STM32 F2 SPI:  Correct a mapping for SPI MOSI pin.  From dlsitzer.
      - OTG FS Host:  Fixes related to low-speed devices and interrupt
        endpoints from Leo.  Necessary in order to use a USB HID mouse
        device.
      - STM32 SDIO:  The dmaflight method must be conditioned on
        CONFIG_SDIO_PREFLIGHT.  Noted by Pelle Windestam.
      - Sourceforge Ticket #26.  up_prioritize_irq should not be called
        if CONFIG_ARCH_IRQPRIO is not defined.

    * Atmel SAM3/4:

      - Fix some backward conditional compilation in the start-up logic.
      - Fix initialization of the default interrupt priorities.  This is
        a critical bug fix!
      - SAM4S: Fix error in macros that disable peripheral clocking.  From
        Bob Doiron.

    * Atmel SAMA5:

      - Fix double mapping of SDRAM when executing out of SDRAM.  In this
        case, the SDRAM was already mapping in arm_head.S.
      - In clock configuration, the BMS bit handling was fixed to match
        what the HW really does.  From David Sidrane.
      - TLB Bufferable bit did not do what I thought it was going to do.
        I though I was selecting a write-through cache, but the result was
        that all caching was disabled and NOR FLASH accesses were very slow.
      - Move the un-definitions of __ramfuncs__ from the clock configuration
        .c file to the .h file.  Otherwise, the attribute will be applied
        differently for the prototype and the function definition.
        Sourceforge patch 38 from Luciano Neri.

    * Atmel SAMA5 Drivers:

      - Fix a case in the UDPHS driver where received status was not being
        cleared, causing OUT SETUP commands to fail.
      - TWI data sending fails to increment the number of byes transferred
        on first byte sent.  from David Sidrane.
      - If running from SDRAM, then BOARD_MCK_FREQUENCY is not a constant
        and cannot be used in conditional compilation.  All drivers fixed
        EXCEPT for the PWM and Timer/Counter drivers which will need some
        more extensive redesign.

    * Atmel SAMA5 Boards:

      - SAMA5D3x-EK: The red LED is controlled by PE24 which is also the
        camera/ISI interface reset line.  So if the a camera is installed,
        then we must avoid controlling the red LED or we inadvertently
        also reset the camera module.  Noted by David Sidrane.
      - Header files reference type xcpt_t in certain configurations and
        so must include nuttx/irq.h.  This is Sourceforge bug 25 submitted
        by Luciano Neri.

    * NXP LPC17xx Drivers

      - arm/src/lpc17xx/Kconfig and lpc17_ethernet.c:  The default interrupt
         priority should be default, not the highest priority (2014-4-19).

    * ZiLOG ZNEO

      - Fix calculation of timer reload and prescaler.  The timer frequency
        was way too fast.

    * Library:

      - strncpy():  Change ordering of test and copy.  Logic would have
        failed if n=0; one byte was always copying before testing
        for the end of the copy.
      - Fix a counting error in the return value from sscanf().  Noted by
        kfrolov.  Also, sscanf() should return EOF if no values were
        converted.
      - Fix a logic error in ftell().  It was simply using the file offset
        and did not take into account data buffered in memory.  From Macs N.
      - sccanf():  Use stroul() vs strol() with %u format otherwise, range
        of values is restricted because of sign bit. From kfrolov.

    * Configuration/Build System:

      - Fix a build error that occurs when only USB device tracing is enabled.

    * NuttShell (NSH):

      - Fix NuttShell version number display in the NSH welcome message.
        version.h was not being included.

    * Other Applications:

      - sysinfo:  CONFIG_VERSION_BUILD is a string an needs to be
        printed with %s, not %d.  Noted by Librae.
      - nxplayer:  Compilation failure in one configuration reported by
        Manuel Stuhn.
      - System sdcard:  Remove an STM32 dependency.  From Bob Doiron.
      - telnetd Example:  Naming is confused.  In someplaces 'telnetd',
        and in others 'shell.'  All changes to telnetd.  Noted by Pelle
        Windestam.