Straighten out conditional compilation

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1896 42af7a65-404d-4744-a932-0658087f49c3

arch/arm/include/arch.h

 /****************************************************************************
  * arch/arm/include/arch.h
  *
- *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -48,6 +48,41 @@
  * Definitions
  ****************************************************************************/
 
+/* This identifies the register the is used by the processor as the PIC base
+ * register.  It is usually r9 or r10
+ */
+
+#define PIC_REG         r10
+#define PIC_REG_STRING "r10"
+
+/* Macros to get and set the PIC base register.  picbase is assumed to be
+ * of type (void*) and that it will fit into a uint32.  These must be
+ * inline so that they will be compatible with the ABIs rules for
+ * preserving the PIC register
+ */
+
+#define up_getpicbase(ppicbase) \
+do { \
+  uint32 picbase; \
+  __asm__ \
+  ( \
+    "\tmov %0, " PIC_REG_STRING "\n\t" \
+    : "=r"(picbase) \
+  ); \
+  *ppicbase = (FAR void*)picbase; \
+} while (0)
+
+#define up_setpicbase(picbase) \
+do { \
+  uint32 _picbase = (uint32)picbase; \
+  __asm__ \
+  ( \
+    "\tmov " PIC_REG_STRING ", %0\n\t" \
+    : : "r"(_picbase) : PIC_REG_STRING \
+  ); \
+} while (0)
+
+
 /****************************************************************************
  * Inline functions
  ****************************************************************************/

binfmt/binfmt_dumpmodule.c

@@ -48,7 +48,7 @@
 
 #include "binfmt_internal.h"
 
-#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT) && !defined(CONFIG_BINFMT_DISABLE)
 
 /****************************************************************************
  * Pre-processor Definitions

binfmt/binfmt_execmodule.c

@@ -51,6 +51,8 @@
 #include "os_internal.h"
 #include "binfmt_internal.h"
 
+#ifndef CONFIG_BINFMT_DISABLE
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -142,11 +144,13 @@ int exec_module(FAR const struct binary_s *bin, int priority)
 
   /* Add the DSpace address as the PIC base address */
 
+#ifdef CONFIG_PIC
   tcb->picbase = bin->dspace;
 
   /* Re-initialize the task's initial state to account for the new PIC base */
 
   up_initial_state(tcb);
+#endif
 
   /* Get the assigned pid before we start the task */
 
@@ -181,4 +185,5 @@ errout:
   return ERROR;
 }
 
+#endif /* CONFIG_BINFMT_DISABLE */
 

binfmt/binfmt_globals.c

@@ -42,6 +42,8 @@
 
 #include <nuttx/binfmt.h>
 
+#ifndef CONFIG_BINFMT_DISABLE
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -61,7 +63,10 @@ FAR struct binfmt_s *g_binfmts;
  * Private Functions
  ****************************************************************************/
 
-/***********************************************************************
+/****************************************************************************
  * Public Functions
- ***********************************************************************/
+ ****************************************************************************/
+
+#endif /* CONFIG_BINFMT_DISABLE */
+
 

binfmt/binfmt_loadmodule.c

@@ -48,6 +48,8 @@
 
 #include "binfmt_internal.h"
 
+#ifndef CONFIG_BINFMT_DISABLE
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -136,4 +138,5 @@ int load_module(const char *filename, FAR struct binary_s *bin)
   return OK;
 }
 
+#endif /* CONFIG_BINFMT_DISABLE */
 

binfmt/binfmt_register.c

@@ -49,6 +49,8 @@
 
 #include "binfmt_internal.h"
 
+#ifndef CONFIG_BINFMT_DISABLE
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -99,4 +101,5 @@ int register_binfmt(FAR struct binfmt_s *binfmt)
   return -EINVAL;
 }
 
+#endif /* CONFIG_BINFMT_DISABLE */
 

binfmt/binfmt_unloadmodule.c

@@ -50,6 +50,8 @@
 
 #include "binfmt_internal.h"
 
+#ifndef CONFIG_BINFMT_DISABLE
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -103,3 +105,5 @@ int unload_module(FAR const struct binary_s *bin)
   return OK;
 }
 
+#endif /* CONFIG_BINFMT_DISABLE */
+

binfmt/binfmt_unregister.c

@@ -49,6 +49,8 @@
 
 #include "binfmt_internal.h"
 
+#ifndef CONFIG_BINFMT_DISABLE
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -133,4 +135,5 @@ int unregister_binfmt(FAR struct binfmt_s *binfmt)
   return ret;
 }
 
+#endif /* CONFIG_BINFMT_DISABLE */
 

binfmt/nxflat.c

@@ -49,6 +49,8 @@
 #include <nuttx/binfmt.h>
 #include <nuttx/nxflat.h>
 
+#ifdef CONFIG_NXFLAT
+
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
@@ -235,3 +237,5 @@ void nxflat_uninitialize(void)
   unregister_binfmt(&g_nxflatbinfmt);
 }
 
+#endif /* CONFIG_NXFLAT */
+

include/nuttx/arch.h

@@ -33,8 +33,8 @@
  *
  ****************************************************************************/
 
-#ifndef __ARCH_H
-#define __ARCH_H
+#ifndef __INCLUDE_NUTTX_ARCH_H
+#define __INCLUDE_NUTTX_ARCH_H
 
 /****************************************************************************
  * Included Files
@@ -367,15 +367,16 @@ EXTERN void up_allocate_heap(FAR void **heap_start, size_t *heap_size);
  * Name: up_setpicbase, up_getpicbase
  *
  * Description:
- *   It NXFLAT external modules are supported, then these macros must
- *   defined to (1) get or get the PIC base register value.  These must
- *   be done with in-line assembly.
+ *   It NXFLAT external modules (or any other binary format that requires)
+ *   PIC) are supported, then these macros must defined to (1) get or get
+ *   the PIC base register value.  These must be implemented with in-line
+ *   assembly.
  *
  ****************************************************************************/
 
-#ifndef CONFIG_NXFLAT
+#ifndef CONFIG_PIC
 #  define up_setpicbase(picbase)
-#  define up_getpicbase()
+#  define up_getpicbase(ppicbase)
 #endif
 
 /****************************************************************************
@@ -529,5 +530,5 @@ EXTERN int up_putc(int ch);
 }
 #endif
 
-#endif /* __ARCH_H */
+#endif /* __INCLUDE_NUTTX_ARCH_H */
 

include/nuttx/sched.h

@@ -216,7 +216,7 @@ struct _TCB
 
   /* External Module Support ****************************************************/
 
-#ifdef CONFIG_NXFLAT
+#ifdef CONFIG_PIC
   FAR void *picbase;                     /* Allocated area for .bss and .data   */
 #endif
 

sched/sched_releasetcb.c

@@ -137,7 +137,7 @@ int sched_releasetcb(FAR _TCB *tcb)
 
       /* Delete the tasks's allocated DSpace region (external modules only) */
 
-#ifdef CONFIG_NXFLAT
+#ifdef CONFIG_PIC
       if (tcb->picbase)
         {
           sched_free(tcb->picbase);

sched/wd_internal.h

@@ -65,7 +65,7 @@ struct wdog_s
 {
   FAR struct wdog_s *next;       /* Support for singly linked lists. */
   wdentry_t          func;       /* Function to execute when delay expires */
-#ifdef CONFIG_NXFLAT
+#ifdef CONFIG_PIC
   FAR void          *picbase;    /* PIC base address */
 #endif
   int                lag;        /* Timer associated with the delay */

sched/wd_start.c

@@ -158,8 +158,8 @@ STATUS wd_start(WDOG_ID wdog, int delay, wdentry_t wdentry,  int argc, ...)
   /* Save the data in the watchdog structure */
 
   wdog->func = wdentry;         /* Function to execute when delay expires */
-#ifdef CONFIG_NXFLAT
-  wdog->picbase = up_getpicbase();
+#ifdef CONFIG_PIC
+  up_getpicbase(&wdog->picbase);
 #endif
   wdog->argc = argc;
 

tools/mkconfig.c

@@ -220,6 +220,19 @@ int main(int argc, char **argv, char **envp)
   printf("#if defined(__NXFLAT__) && !defined(CONFIG_NXFLAT)\n");
   printf("# error \"NXFLAT support not enabled in this configuration\"\n");
   printf("#endif\n\n");
+  printf("/* NXFLAT requires PIC support in the TCBs. */\n\n");
+  printf("#if defined(CONFIG_NXFLAT)\n");
+  printf("# undef CONFIG_PIC\n");
+  printf("# define CONFIG_PIC 1\n");
+  printf("#endif\n\n");
+  printf("/* Binary format support is disabled if no binary formats are\n");
+  printf(" * configured (at present, NXFLAT is the only supported binary.\n");
+  printf(" * format).\n");
+  printf(" */\n\n");
+  printf("#if !defined(CONFIG_NXFLAT)\n");
+  printf("# undef CONFIG_BINFMT_DISABLE\n");
+  printf("# define CONFIG_BINFMT_DISABLE 1\n");
+  printf("#endif\n\n");
   printf("/* The correct way to disable RR scheduling is to set the\n");
   printf(" * timeslice to zero.\n");
   printf(" */\n\n");