Rename KL version of CONFIG_GPIO_IRQ to CONFIG_KL_GPIOIRQ

arch/arm/src/kl/Kconfig

@@ -345,12 +345,12 @@ config KL_TPM2_CHANNEL
 
 comment "Kinetis GPIO Interrupt Configuration"
 
-config GPIO_IRQ
+config KL_GPIOIRQ
 	bool "GPIO pin interrupts"
 	---help---
 		Enable support for interrupting GPIO pins
 
-if GPIO_IRQ
+if KL_GPIOIRQ
 
 config KL_PORTAINTS
 	bool "GPIOA interrupts"

arch/arm/src/kl/Make.defs

@@ -81,7 +81,7 @@ ifeq ($(CONFIG_BUILD_PROTECTED),y)
 CHIP_CSRCS += kl_userspace.c
 endif
 
-ifeq ($(CONFIG_GPIO_IRQ),y)
+ifeq ($(CONFIG_KL_GPIOIRQ),y)
 CHIP_CSRCS += kl_gpioirq.c
 endif
 

arch/arm/src/kl/kl_gpio.h

@@ -386,7 +386,7 @@ xcpt_t kl_gpioirqattach(uint32_t pinset, xcpt_t pinisr);
  *
  ************************************************************************************/
 
-#ifdef CONFIG_GPIO_IRQ
+#ifdef CONFIG_KL_GPIOIRQ
 void kl_gpioirqenable(uint32_t pinset);
 #else
 #  define kl_gpioirqenable(pinset)
@@ -400,7 +400,7 @@ void kl_gpioirqenable(uint32_t pinset);
  *
  ************************************************************************************/
 
-#ifdef CONFIG_GPIO_IRQ
+#ifdef CONFIG_KL_GPIOIRQ
 void kl_gpioirqdisable(uint32_t pinset);
 #else
 #  define kl_gpioirqdisable(pinset)

arch/arm/src/kl/kl_gpioirq.c

@@ -51,7 +51,7 @@
 #include "chip/kl_port.h"
 #include "kl_gpio.h"
 
-#ifdef CONFIG_GPIO_IRQ
+#ifdef CONFIG_KL_GPIOIRQ
 
 /****************************************************************************
  * Pre-processor Definitions
@@ -396,4 +396,4 @@ void kl_gpioirqdisable(uint32_t pinset)
     }
 #endif /* HAVE_PORTINTS */
 }
-#endif /* CONFIG_GPIO_IRQ */
+#endif /* CONFIG_KL_GPIOIRQ */

arch/arm/src/kl/kl_irq.c

@@ -248,7 +248,7 @@ void up_irqinitialize(void)
    * configured pin interrupts.
    */
 
-#ifdef CONFIG_GPIO_IRQ
+#ifdef CONFIG_KL_GPIOIRQ
   kl_gpioirqinitialize();
 #endif
 

configs/freedom-kl25z/minnsh/defconfig

@@ -135,7 +135,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
 # CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
 # CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
 CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_GPIO_IRQ is not set
+# CONFIG_KL_GPIOIRQ is not set
 
 #
 # Kinetis Configuration Options

configs/freedom-kl25z/nsh/defconfig

@@ -135,7 +135,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
 # CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
 # CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
 CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_GPIO_IRQ is not set
+# CONFIG_KL_GPIOIRQ is not set
 
 #
 # Kinetis Configuration Options

configs/freedom-kl26z/minnsh/defconfig

@@ -135,7 +135,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
 # CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
 # CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
 CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_GPIO_IRQ is not set
+# CONFIG_KL_GPIOIRQ is not set
 
 #
 # Kinetis Configuration Options

configs/freedom-kl26z/nsh/defconfig

@@ -135,7 +135,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
 # CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
 # CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
 CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_GPIO_IRQ is not set
+# CONFIG_KL_GPIOIRQ is not set
 
 #
 # Kinetis Configuration Options

configs/teensy-lc/nsh/defconfig

@@ -136,7 +136,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
 # CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
 # CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
 CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y
-# CONFIG_GPIO_IRQ is not set
+# CONFIG_KL_GPIOIRQ is not set
 
 #
 # Kinetis Configuration Options