Zkit-ARM-1868: MMC/SD is on SPI, not SSP0. From Rashid Fatah

configs/zkit-arm-1769/nsh/defconfig

@@ -65,6 +65,7 @@ CONFIG_ARCH="arm"
 # CONFIG_ARCH_CHIP_DM320 is not set
 # CONFIG_ARCH_CHIP_IMX is not set
 # CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
 # CONFIG_ARCH_CHIP_LM is not set
 CONFIG_ARCH_CHIP_LPC17XX=y
 # CONFIG_ARCH_CHIP_LPC214X is not set
@@ -72,15 +73,24 @@ CONFIG_ARCH_CHIP_LPC17XX=y
 # CONFIG_ARCH_CHIP_LPC31XX is not set
 # CONFIG_ARCH_CHIP_LPC43XX is not set
 # CONFIG_ARCH_CHIP_NUC1XX is not set
-# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
 # CONFIG_ARCH_CHIP_STM32 is not set
 # CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM4 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
 CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="lpc17xx"
 # CONFIG_ARMV7M_USEBASEPRI is not set
 CONFIG_ARCH_HAVE_CMNVECTOR=y
 # CONFIG_ARMV7M_CMNVECTOR is not set
+# CONFIG_ARCH_HAVE_FPU is not set
 CONFIG_ARCH_HAVE_MPU=y
 # CONFIG_ARMV7M_MPU is not set
 
@@ -92,6 +102,7 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
 # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
 # CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
 CONFIG_ARMV7M_OABI_TOOLCHAIN=y
+# CONFIG_GPIO_IRQ is not set
 
 #
 # LPC17xx Configuration Options
@@ -132,10 +143,11 @@ CONFIG_LPC17_UART0=y
 # CONFIG_LPC17_UART1 is not set
 # CONFIG_LPC17_UART2 is not set
 # CONFIG_LPC17_UART3 is not set
+# CONFIG_LPC17_UART4 is not set
 # CONFIG_LPC17_CAN1 is not set
 # CONFIG_LPC17_CAN2 is not set
-# CONFIG_LPC17_SPI is not set
-CONFIG_LPC17_SSP0=y
+CONFIG_LPC17_SPI=y
+# CONFIG_LPC17_SSP0 is not set
 # CONFIG_LPC17_SSP1 is not set
 # CONFIG_LPC17_I2C0 is not set
 # CONFIG_LPC17_I2C1 is not set
@@ -157,23 +169,13 @@ CONFIG_LPC17_SSP0=y
 # CONFIG_LPC17_FLASH is not set
 
 #
-# Serial driver options
-#
-# CONFIG_SERIAL_TERMIOS is not set
-# CONFIG_UART0_FLOWCONTROL is not set
-
-#
-# ADC driver options
-#
-
-#
-# CAN driver options
+# External Memory Configuration
 #
-# CONFIG_GPIO_IRQ is not set
 
 #
-# I2C driver options
+# Serial driver options
 #
+# CONFIG_SERIAL_TERMIOS is not set
 
 #
 # Ethernet driver options
@@ -187,18 +189,6 @@ CONFIG_NET_PRIORITY=0
 # CONFIG_NET_HASH is not set
 # CONFIG_NET_MULTICAST is not set
 
-#
-# USB device driver options
-#
-
-#
-# USB host driver options
-#
-
-#
-# External Memory Configuration
-#
-
 #
 # Architecture Options
 #
@@ -212,14 +202,14 @@ CONFIG_ARCH_HAVE_VFORK=y
 CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ENDIAN_BIG is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
 
 #
 # Board Settings
 #
 CONFIG_BOARD_LOOPSPERMSEC=8079
 # CONFIG_ARCH_CALIBRATION is not set
-CONFIG_RAM_START=0x10000000
-CONFIG_RAM_SIZE=32768
 CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
 CONFIG_ARCH_INTERRUPTSTACK=0
 
@@ -232,6 +222,12 @@ CONFIG_BOOT_RUNFROMFLASH=y
 # CONFIG_BOOT_RUNFROMSDRAM is not set
 # CONFIG_BOOT_COPYTORAM is not set
 
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x10000000
+CONFIG_RAM_SIZE=32768
+
 #
 # Board Selection
 #
@@ -245,6 +241,7 @@ CONFIG_ARCH_BOARD="zkit-arm-1769"
 #
 # Common Board Options
 #
+CONFIG_ARCH_HAVE_LEDS=y
 CONFIG_ARCH_LEDS=y
 CONFIG_NSH_MMCSDMINOR=0
 CONFIG_NSH_MMCSDSLOTNO=0
@@ -273,7 +270,6 @@ CONFIG_DEV_CONSOLE=y
 # CONFIG_FDCLONE_DISABLE is not set
 # CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-# CONFIG_SCHED_WORKQUEUE is not set
 CONFIG_SCHED_WAITPID=y
 # CONFIG_SCHED_STARTHOOK is not set
 # CONFIG_SCHED_ATEXIT is not set
@@ -333,9 +329,11 @@ CONFIG_SPI=y
 # CONFIG_SPI_OWNBUS is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
 # CONFIG_LCD is not set
@@ -347,19 +345,43 @@ CONFIG_MMCSD_NSLOTS=1
 # CONFIG_MMCSD_HAVECARDDETECT is not set
 CONFIG_MMCSD_SPI=y
 CONFIG_MMCSD_SPICLOCK=12500000
-# CONFIG_MMCSD_SDIO is not set
+CONFIG_MMCSD_SPIMODE=0
+# CONFIG_ARCH_HAVE_SDIO is not set
 # CONFIG_MTD is not set
-# CONFIG_NETDEVICES is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEV_MULTINIC is not set
+
+#
+# External Ethernet MAC Device Support
+#
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
 # CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
+
+#
+# External Ethernet PHY Device Support
+#
+# CONFIG_ETH0_PHY_NONE is not set
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+CONFIG_ETH0_PHY_DP83848C=y
+# CONFIG_ETH0_PHY_LAN8720 is not set
+# CONFIG_ETH0_PHY_DM9161 is not set
 # CONFIG_PIPES is not set
 # CONFIG_PM is not set
 # CONFIG_POWER is not set
 # CONFIG_SENSORS is not set
-# CONFIG_SERCOMM_CONSOLE is not set
 CONFIG_SERIAL=y
 # CONFIG_DEV_LOWCONSOLE is not set
 # CONFIG_16550_UART is not set
 CONFIG_ARCH_HAVE_UART0=y
+
+#
+# USART Configuration
+#
 CONFIG_MCU_SERIAL=y
 CONFIG_STANDARD_SERIAL=y
 CONFIG_UART0_SERIAL_CONSOLE=y
@@ -374,6 +396,10 @@ CONFIG_UART0_BAUD=115200
 CONFIG_UART0_BITS=8
 CONFIG_UART0_PARITY=0
 CONFIG_UART0_2STOP=0
+# CONFIG_UART0_IFLOWCONTROL is not set
+# CONFIG_UART0_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
 # CONFIG_WIRELESS is not set
@@ -392,12 +418,9 @@ CONFIG_UART0_2STOP=0
 #
 CONFIG_NET=y
 CONFIG_ARCH_HAVE_PHY=y
-# CONFIG_ETH0_PHY_KS8721 is not set
-CONFIG_ETH0_PHY_DP83848C=y
-# CONFIG_ETH0_PHY_LAN8720 is not set
-# CONFIG_ETH0_PHY_DM9161 is not set
 # CONFIG_NET_NOINTS is not set
 # CONFIG_NET_MULTIBUFFER is not set
+# CONFIG_NET_PROMISCUOUS is not set
 # CONFIG_NET_IPv6 is not set
 CONFIG_NSOCKET_DESCRIPTORS=8
 CONFIG_NET_NACTIVESOCKETS=16
@@ -425,6 +448,7 @@ CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
 CONFIG_NET_UDP_CONNS=8
 # CONFIG_NET_BROADCAST is not set
+# CONFIG_NET_RXAVAIL is not set
 CONFIG_NET_ICMP=y
 CONFIG_NET_ICMP_PING=y
 # CONFIG_NET_PINGADDRCONF is not set
@@ -452,6 +476,7 @@ CONFIG_FAT_MAXFNAME=32
 # CONFIG_NFS is not set
 # CONFIG_FS_NXFFS is not set
 # CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
 
 #
 # System Logging
@@ -467,10 +492,16 @@ CONFIG_FAT_MAXFNAME=32
 #
 # Memory Management
 #
+# CONFIG_MM_MULTIHEAP is not set
 # CONFIG_MM_SMALL is not set
 CONFIG_MM_REGIONS=2
 # CONFIG_GRAN is not set
 
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
 #
 # Binary Formats
 #
@@ -496,6 +527,7 @@ CONFIG_LIB_HOMEDIR="/"
 # CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
@@ -511,9 +543,11 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 # CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
 
 #
-# Non-standard Helper Functions
+# Non-standard Library Support
 #
+# CONFIG_SCHED_WORKQUEUE is not set
 # CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
 
 #
 # Basic CXX Support
@@ -534,6 +568,7 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 #
 # CONFIG_EXAMPLES_BUTTONS is not set
 # CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CC3000BASIC is not set
 # CONFIG_EXAMPLES_COMPOSITE is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
@@ -547,9 +582,10 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 # CONFIG_EXAMPLES_IGMP is not set
 # CONFIG_EXAMPLES_LCDRW is not set
 # CONFIG_EXAMPLES_MM is not set
-# CONFIG_EXAMPLES_MOUNT is not set
 # CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
 # CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set
@@ -570,6 +606,9 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_ROMFS is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_THTTPD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -583,6 +622,11 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WGET is not set
 
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
 #
 # Interpreters
 #
@@ -632,6 +676,7 @@ CONFIG_NSH_LIBRARY=y
 # CONFIG_NSH_DISABLE_CAT is not set
 # CONFIG_NSH_DISABLE_CD is not set
 # CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
 # CONFIG_NSH_DISABLE_DD is not set
 # CONFIG_NSH_DISABLE_ECHO is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
@@ -668,9 +713,15 @@ CONFIG_NSH_LIBRARY=y
 # CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_NSH_DISABLE_WGET is not set
 # CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_FILEIOSIZE=512
 CONFIG_NSH_LINELEN=64
+CONFIG_NSH_MAXARGUMENTS=6
 CONFIG_NSH_NESTDEPTH=3
 # CONFIG_NSH_DISABLESCRIPT is not set
 # CONFIG_NSH_DISABLEBG is not set
@@ -717,6 +768,15 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
 #
 # CONFIG_SYSTEM_INSTALL is not set
 
+#
+# FLASH Erase-all Command
+#
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
 #
 # readline()
 #
@@ -746,3 +806,8 @@ CONFIG_READLINE_ECHO=y
 #
 # USB Monitor
 #
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set

configs/zkit-arm-1769/src/up_nsh.c

@@ -63,7 +63,7 @@
 
 #ifdef CONFIG_ARCH_BOARD_ZKITARM
 #  define CONFIG_NSH_HAVEUSBDEV 1
-#  ifdef CONFIG_LPC17_SSP0
+#  ifdef CONFIG_LPC17_SPI
 #    define CONFIG_NSH_HAVEMMCSD 1
 #  else
 #    undef CONFIG_NSH_HAVEMMCSD
@@ -78,7 +78,7 @@
 
 #ifdef CONFIG_NSH_HAVEMMCSD
 #  if !defined(CONFIG_NSH_MMCSDSPIPORTNO) || CONFIG_NSH_MMCSDSPIPORTNO != 0
-#    error "The ZKit-arm MMC/SD is on SSP0"
+#    error "The ZKit-arm MMC/SD is on SPI port 0"
 #    undef CONFIG_NSH_MMCSDSPIPORTNO
 #    define CONFIG_NSH_MMCSDSPIPORTNO 0
 #  endif
@@ -144,33 +144,33 @@
 int nsh_archinitialize(void)
 {
 #ifdef CONFIG_NSH_HAVEMMCSD
-  FAR struct spi_dev_s *ssp;
+  FAR struct spi_dev_s *spi;
   int ret;
 
-  /* Get the SSP port */
+  /* Get the SPI port */
 
-  ssp = lpc17_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
-  if (!ssp)
+  spi = lpc17_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
+  if (!spi)
     {
-      message("nsh_archinitialize: Failed to initialize SSP port %d\n",
+      message("nsh_archinitialize: Failed to initialize SPI port %d\n",
               CONFIG_NSH_MMCSDSPIPORTNO);
       return -ENODEV;
     }
 
-  message("Successfully initialized SSP port %d\n",
+  message("Successfully initialized SPI port %d\n",
           CONFIG_NSH_MMCSDSPIPORTNO);
 
-  /* Bind the SSP port to the slot */
+  /* Bind the SPI port to the slot */
 
-  ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, ssp);
+  ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi);
   if (ret < 0)
     {
-      message("nsh_archinitialize: Failed to bind SSP port %d to MMC/SD slot %d: %d\n",
+      message("nsh_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
               CONFIG_NSH_MMCSDSPIPORTNO, CONFIG_NSH_MMCSDSLOTNO, ret);
       return ret;
     }
 
-  message("Successfuly bound SSP port %d to MMC/SD slot %d\n",
+  message("Successfuly bound SPI port %d to MMC/SD slot %d\n",
           CONFIG_NSH_MMCSDSPIPORTNO, CONFIG_NSH_MMCSDSLOTNO);
 #endif
   return OK;