Skip to content
Snippets Groups Projects
Commit 6ae8e98e authored by patacongo's avatar patacongo
Browse files

Minor update to Shenzhou README files 

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5119 42af7a65-404d-4744-a932-0658087f49c3
parent 52150a94
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 162 additions and 256 deletions
configs/ea3131/tools/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/ea3152/tools/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/nucleus2g/tools/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/olimex-lpc1766stk/tools/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/olimex-strp711/scripts/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/shenzhou/README.txt
+ 2
− 182
View file @ 6ae8e98e
......@@ -677,8 +677,8 @@ Where <subdir> is one of the following:
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_NSH_DHCPC=n : DHCP is disabled
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) : Target IP address 10.0.0.2
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
CONFIG_NSH_IPADDR=0x0a000002 : Target IP address 10.0.0.2
CONFIG_NSH_DRIPADDR=0x0a000001 : Host IP address 10.0.0.1
NOTES:
1. This example assumes that a network is connected. During its
......@@ -687,183 +687,3 @@ Where <subdir> is one of the following:
delay (maybe 30 seconds?) before anything happens. That is the timeout
before the networking finally gives up and decides that no network is
available.
2. This example supports the ADC test (apps/examples/adc) but this must
be manually enabled by selecting:
CONFIG_ADC=y : Enable the generic ADC infrastructure
CONFIG_STM32_ADC3=y : Enable ADC3
CONFIG_STM32_TIM1=y : Enable Timer 1
CONFIG_STM32_TIM1_ADC=y : Indicate that timer 1 will be used to trigger an ADC
CONFIG_STM32_TIM1_ADC3=y : Assign timer 1 to drive ADC3 sampling
CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100 : Select a sampling frequency
See also apps/examples/README.txt
General debug for analog devices (ADC/DAC):
CONFIG_DEBUG_ANALOG
3. This example supports the PWM test (apps/examples/pwm) but this must
be manually enabled by selecting eeither
CONFIG_PWM=y : Enable the generic PWM infrastructure
CONFIG_PWM_PULSECOUNT=n : Disable to support for TIM1/8 pulse counts
CONFIG_STM32_TIM4=y : Enable TIM4
CONFIG_STM32_TIM4_PWM=y : Use TIM4 to generate PWM output
CONFIG_STM32_TIM4_CHANNEL=2 : Select output on TIM4, channel 2
If CONFIG_STM32_FSMC is disabled, output will appear on CN3, pin 32.
Ground is available on CN3, pin1.
Or..
CONFIG_PWM=y : Enable the generic PWM infrastructure
CONFIG_PWM_PULSECOUNT=y : Enable to support for TIM1/8 pulse counts
CONFIG_STM32_TIM8=y : Enable TIM8
CONFIG_STM32_TIM8_PWM=y : Use TIM8 to generate PWM output
CONFIG_STM32_TIM8_CHANNEL=4 : Select output on TIM8, channel 4
If CONFIG_STM32_FSMC is disabled, output will appear on CN3, pin 17
Ground is available on CN23 pin1.
See also include/board.h and apps/examples/README.txt
Special PWM-only debug options:
CONFIG_DEBUG_PWM
4. This example supports the CAN loopback test (apps/examples/can) but this
must be manually enabled by selecting:
CONFIG_CAN=y : Enable the generic CAN infrastructure
CONFIG_CAN_EXID=y or n : Enable to support extended ID frames
CONFIG_STM32_CAN1=y : Enable CAN1
CONFIG_CAN_LOOPBACK=y : Enable CAN loopback mode
See also apps/examples/README.txt
Special CAN-only debug options:
CONFIG_DEBUG_CAN
CONFIG_CAN_REGDEBUG
5. This example can support an FTP client. In order to build in FTP client
support simply uncomment the following lines in the appconfig file (before
configuring) or in the apps/.config file (after configuring):
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += examples/ftpc
6. This example can support an FTP server. In order to build in FTP server
support simply uncomment the following lines in the appconfig file (before
configuring) or in the apps/.config file (after configuring):
#CONFIGURED_APPS += netutils/ftpd
#CONFIGURED_APPS += examples/ftpd
And enable poll() support in the NuttX configuration file:
CONFIG_DISABLE_POLL=n
7. This example supports the watchdog timer test (apps/examples/watchdog)
but this must be manually enabled by selecting:
CONFIG_WATCHDOG=y : Enables watchdog timer driver support
CONFIG_STM32_WWDG=y : Enables the WWDG timer facility, OR
CONFIG_STM32_IWDG=y : Enables the IWDG timer facility (but not both)
The WWDG watchdog is driven off the (fast) 42MHz PCLK1 and, as result,
has a maximum timeout value of 49 milliseconds. For WWDG watchdog, you
should also add the fillowing to the configuration file:
CONFIG_EXAMPLES_WATCHDOG_PINGDELAY=20
CONFIG_EXAMPLES_WATCHDOG_TIMEOUT=49
The IWDG timer has a range of about 35 seconds and should not be an issue.
7. Adding LCD and graphics support:
appconfig (apps/.config): Enable the application configurations that you
want to use. Asexamples:
CONFIGURED_APPS += examples/nx : Pick one or more
CONFIGURED_APPS += examples/nxhello :
CONFIGURED_APPS += examples/nximage :
CONFIGURED_APPS += examples/nxlines :
defconfig (nuttx/.config):
CONFIG_STM32_FSMC=y : FSMC support is required for the LCD
CONFIG_NX=y : Enable graphics suppport
CONFIG_MM_REGIONS=3 : When FSMC is enabled, so is the on-board SRAM memory region
8. USB OTG FS Device or Host Support
CONFIG_USBDEV - Enable USB device support, OR
CONFIG_USBHOST - Enable USB host support
CONFIG_STM32_OTGFS - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG - Needed
CONFIG_SCHED_WORKQUEUE - Worker thread support is required
9. USB OTG FS Host Support. The following changes will enable support for
a USB host on the STM32F4Discovery, including support for a mass storage
class driver:
CONFIG_USBDEV=n - Make sure tht USB device support is disabled
CONFIG_USBHOST=y - Enable USB host support
CONFIG_STM32_OTGFS=y - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG=y - Needed for all USB OTF FS support
CONFIG_SCHED_WORKQUEUE=y - Worker thread support is required for the mass
storage class driver.
CONFIG_NSH_ARCHINIT=y - Architecture specific USB initialization
is needed for NSH
CONFIG_FS_FAT=y - Needed by the USB host mass storage class.
With those changes, you can use NSH with a FLASH pen driver as shown
belong. Here NSH is started with nothing in the USB host slot:
NuttShell (NSH) NuttX-x.yy
nsh> ls /dev
/dev:
console
null
ttyS0
After inserting the FLASH drive, the /dev/sda appears and can be
mounted like this:
nsh> ls /dev
/dev:
console
null
sda
ttyS0
nsh> mount -t vfat /dev/sda /mnt/stuff
nsh> ls /mnt/stuff
/mnt/stuff:
-rw-rw-rw- 16236 filea.c
And files on the FLASH can be manipulated to standard interfaces:
nsh> echo "This is a test" >/mnt/stuff/atest.txt
nsh> ls /mnt/stuff
/mnt/stuff:
-rw-rw-rw- 16236 filea.c
-rw-rw-rw- 16 atest.txt
nsh> cat /mnt/stuff/atest.txt
This is a test
nsh> cp /mnt/stuff/filea.c fileb.c
nsh> ls /mnt/stuff
/mnt/stuff:
-rw-rw-rw- 16236 filea.c
-rw-rw-rw- 16 atest.txt
-rw-rw-rw- 16236 fileb.c
To prevent data loss, don't forget to un-mount the FLASH drive
before removing it:
nsh> umount /mnt/stuff
11. This configuration requires that jumper JP22 be set to enable RS-232
operation.
configs/shenzhou/tools/olimex-arm-usb-ocd.cfg
+ 2
− 4
View file @ 6ae8e98e
......@@ -6,8 +6,6 @@
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG"
ft2232_layout olimex-jtag
ft2232_vid_pid 0x15ba 0x0003
#jtag_khz 600
ft2232_layout "olimex-jtag"
ft2232_vid_pid 0x15BA 0x0003
configs/shenzhou/tools/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/stm3210e-eval/tools/usb-driver.txt
+ 19
− 10
View file @ 6ae8e98e
......@@ -2,15 +2,24 @@ https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers.
1.1. Connect your programmer/debugger to your computer, open Device Manager and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here: http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the “*.zip” file, open folder FTClean, and run FTClean.exe
1.5. Ror VID (Hex) select “Other”. And after that fill the first box with 15ba and “PID (Hex)” with 0004.
1.6. Press “Clean System” button. Make sure that all FTDI devices are disconnected. (My require administrator privileges).
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-install ARM-USB-OCD driver
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER directory and install.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
configs/stm3220g-eval/tools/usb-driver.txt 0 → 100644
+ 25
− 0
View file @ 6ae8e98e
https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%20G%20drivers.pdf
Repair procedure for ARM-USB-OCD drivers
1. Uninstalling ARM-USB-OCD drivers
-------------------------------------
1.1. Connect your programmer/debugger to your computer, open Device Manager
and uninstall the drivers for ARM-USB-OCD.
1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager,
disconnect the programmer from your computer.
1.3. Now you should download FTClean.exe from here:
http://www.ftdichip.com/Support/Utilities/FTClean.zip.
1.4. After download is complete extract the "*.zip" file, open folder FTClean,
and run FTClean.exe
1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba
and "PID (Hex)" with 0004.
1.6. Press "Clean System" button. Make sure that all FTDI devices are
disconnected. (My require administrator privileges).
2. Re-installing the ARM-USB-OCD driver
---------------------------------------
2.1 Connect the programmer/debugger to the computer.
2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER
directory and install. (A different driver is required for OpenOCD
0.4.0. That driver is available from the olimex.com web site).
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment