ADC support for the Shenzhou board from Darcy Gong

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5232 42af7a65-404d-4744-a932-0658087f49c3

configs/shenzhou/nsh/Make.defs

@@ -151,7 +151,7 @@ CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
 AFLAGS = $(CFLAGS) -D__ASSEMBLY__
 
 NXFLATLDFLAGS1 = -r -d -warn-common
-NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
 LDNXFLATFLAGS = -e main -s 2048
 
 OBJEXT = .o

configs/shenzhou/scripts/ld.script

@@ -74,6 +74,10 @@ SECTIONS
 		*(.ARM.exidx*)
 	} > flash
 	__exidx_end = ABSOLUTE(.);
+	
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
 
 	_eronly = ABSOLUTE(.);
 
@@ -87,10 +91,6 @@ SECTIONS
 		_edata = ABSOLUTE(.);
 	} > sram AT > flash
 
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
 	.bss : {
 		_sbss = ABSOLUTE(.);
 		*(.bss .bss.*)

configs/shenzhou/src/Makefile

@@ -80,6 +80,10 @@ ifeq ($(CONFIG_CAN),y)
 CSRCS		+= up_can.c
 endif
 
+ifeq ($(CONFIG_ADC),y)
+CSRCS		+= up_adc.c
+endif
+
 ifeq ($(CONFIG_WATCHDOG),y)
 CSRCS		+= up_watchdog.c
 endif

configs/shenzhou/src/up_adc.c

+/************************************************************************************
+ * configs/shenzhou/src/up_adc.c
+ * arch/arm/src/board/up_adc.c
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/analog/adc.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "stm32_pwm.h"
+#include "shenzhou-internal.h"
+
+#ifdef CONFIG_ADC
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+/* Up to 3 ADC interfaces are supported */
+
+#if STM32_NADC < 3
+#  undef CONFIG_STM32_ADC3
+#endif
+
+#if STM32_NADC < 2
+#  undef CONFIG_STM32_ADC2
+#endif
+
+#if STM32_NADC < 1
+#  undef CONFIG_STM32_ADC1
+#endif
+
+#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3)
+#ifndef CONFIG_STM32_ADC1
+#  warning "Channel information only available for ADC1"
+#endif
+
+/* The number of ADC channels in the conversion list */
+
+#define ADC1_NCHANNELS 1
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+
+/* Identifying number of each ADC channel: Variable Resistor */
+
+#ifdef CONFIG_STM32_ADC1
+static const uint8_t  g_chanlist[ADC1_NCHANNELS] = {10}; //{10, 8, 9};
+
+/* Configurations of pins used byte each ADC channels */
+
+static const uint32_t g_pinlist[ADC1_NCHANNELS]  = {GPIO_ADC12_IN10}; //{GPIO_ADC12_IN10, GPIO_ADC12_IN8, GPIO_ADC12_IN9};
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: adc_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/adc.
+ *
+ ************************************************************************************/
+
+int adc_devinit(void)
+{
+#ifdef CONFIG_STM32_ADC1
+  static bool initialized = false;
+  struct adc_dev_s *adc;
+  int ret;
+  int i;
+
+  /* Check if we have already initialized */
+
+  if (!initialized)
+    {
+      /* Configure the pins as analog inputs for the selected channels */
+
+      for (i = 0; i < ADC1_NCHANNELS; i++)
+        {
+          stm32_configgpio(g_pinlist[i]);
+        }
+
+      /* Call stm32_adcinitialize() to get an instance of the ADC interface */
+
+      adc = stm32_adcinitialize(1, g_chanlist, ADC1_NCHANNELS);
+      if (adc == NULL)
+        {
+          adbg("ERROR: Failed to get ADC interface\n");
+          return -ENODEV;
+        }
+
+      /* Register the ADC driver at "/dev/adc0" */
+
+      ret = adc_register("/dev/adc0", adc);
+      if (ret < 0)
+        {
+          adbg("adc_register failed: %d\n", ret);
+          return ret;
+        }
+
+      /* Now we are initialized */
+
+      initialized = true;
+    }
+
+  return OK;
+#else
+  return -ENOSYS;
+#endif
+}
+
+#endif /* CONFIG_STM32_ADC1 || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */
+#endif /* CONFIG_ADC */