Fix big-time naming error -- what was I thinking?

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3059 42af7a65-404d-4744-a932-0658087f49c3

configs/README.txt

@@ -805,7 +805,7 @@ Supported Boards
 
 configs/avr32dev1
     This is a port of NuttX to the Atmel AVR32DEV1 board.  That board is
-    based on the Atmel AT91UC3B0256 MCU and uses a specially patched
+    based on the Atmel AT32UC3B0256 MCU and uses a specially patched
     version of the GNU toolchain:  The patches provide support for the
     AVR32 family.  That patched GNU toolchain is available only from the
     Atmel website.  STATUS: Under development.

configs/avr32dev1/README.txt

@@ -49,7 +49,7 @@ In configs/avr32dev/include/board.h:
   #define PINMUX_USART1_RXD   PINMUX_USART1_RXD_1
   #define PINMUX_USART1_TXD   PINMUX_USART1_TXD_1
 
-In arch/avr/src/at91uc3/at91uc3b_pinmux.h:
+In arch/avr/src/at32uc3/at32uc3b_pinmux.h:
 
   #define PINMUX_USART1_RXD_1 (GPIO_PERIPH | GPIO_FUNCD | GPIO_PORTA | 17)
   #define PINMUX_USART1_TXD_1 (GPIO_PERIPH | GPIO_FUNCA | GPIO_PORTA | 23)
@@ -111,7 +111,7 @@ IDEs
   2) Start the NuttX build at least one time from the Cygwin command line
      before trying to create your project.  This is necessary to create
      certain auto-generated files and directories that will be needed.
-  3) Set up include pathes:  You will need include/, arch/avr/src/at91uc3,
+  3) Set up include pathes:  You will need include/, arch/avr/src/at32uc3,
      arch/avr/src/common, arch/arm/src/avr, and sched/.
   4) All assembly files need to have the definition option -D __ASSEMBLY__
      on the command line.
@@ -263,12 +263,12 @@ AVR32DEV1 Configuration Options
 
 	CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
 
-	   CONFIG_ARCH_CHIP=at91uc3
+	   CONFIG_ARCH_CHIP=at32uc3
 
 	CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
 	   chip:
 
-	   CONFIG_ARCH_CHIP_AT91UC3B0256
+	   CONFIG_ARCH_CHIP_AT32UC3B0256
 
 	CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
 	   hence, the board that supports the particular chip or SoC.
@@ -297,7 +297,7 @@ AVR32DEV1 Configuration Options
 
 	   CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
 
-	CONFIG_ARCH_IRQPRIO - The AT91UC3B0256 supports interrupt prioritization
+	CONFIG_ARCH_IRQPRIO - The AT32UC3B0256 supports interrupt prioritization
 
 	   CONFIG_ARCH_IRQPRIO=y
 
@@ -335,7 +335,7 @@ AVR32DEV1 Configuration Options
 	CONFIG_AVR32_USARTn_IRDA - Configure USARTn as an IRDA interface.
 	CONFIG_AVR32_USARTn_ISO786 - Configure USARTn as an ISO786 interface.
 
-  AT91UC3B0256 specific device driver settings
+  AT32UC3B0256 specific device driver settings
 
 	CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
 	   console and ttys0 (default is the USART0).

configs/avr32dev1/ostest/defconfig

@@ -75,8 +75,8 @@
 CONFIG_ARCH=avr
 CONFIG_ARCH_AVR=y
 CONFIG_ARCH_AVR32=y
-CONFIG_ARCH_CHIP=at91uc3
-CONFIG_ARCH_CHIP_AT91UC3B0256=y
+CONFIG_ARCH_CHIP=at32uc3
+CONFIG_ARCH_CHIP_AT32UC3B0256=y
 CONFIG_ARCH_BOARD=avr32dev1
 CONFIG_ARCH_BOARD_AVR32DEV1=y
 CONFIG_BOARD_LOOPSPERMSEC=7982

configs/avr32dev1/src/avr32dev1_internal.h

@@ -34,8 +34,8 @@
  *
  ************************************************************************************/
 
-#ifndef _CONFIGS_AT91DEV1_SRC_AT91DEV1_INTERNAL_H
-#define _CONFIGS_AT91DEV1_SRC_AT91DEV1_INTERNAL_H
+#ifndef _CONFIGS_AVR32DEV1_SRC_AVR32DEV1_INTERNAL_H
+#define _CONFIGS_AVR32DEV1_SRC_AVR32DEV1_INTERNAL_H
 
 /************************************************************************************
  * Included Files
@@ -43,7 +43,7 @@
 
 #include <nuttx/config.h>
 #include <nuttx/compiler.h>
-#include "at91uc3_config.h"
+#include "at32uc3_config.h"
 
 /************************************************************************************
  * Definitions
@@ -123,5 +123,5 @@ extern void up_ledinitialize(void);
 #endif
 
 #endif /* __ASSEMBLY__ */
-#endif /* _CONFIGS_AT91DEV1_SRC_AT91DEV1_INTERNAL_H */
+#endif /* _CONFIGS_AVR32DEV1_SRC_AVR32DEV1_INTERNAL_H */
 

configs/avr32dev1/src/up_boot.c

@@ -47,7 +47,7 @@
 #include "up_arch.h"
 #include "up_internal.h"
 
-#include "at91uc3_internal.h"
+#include "at32uc3_internal.h"
 #include "avr32dev1_internal.h"
 
 /************************************************************************************

configs/avr32dev1/src/up_buttons.c

@@ -38,7 +38,7 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
-#include "at91uc3_config.h"
+#include "at32uc3_config.h"
 
 #include <sys/types.h>
 #include <stdint.h>
@@ -48,7 +48,7 @@
 #include <arch/irq.h>
 #include <arch/board/board.h>
 
-#include "at91uc3_internal.h"
+#include "at32uc3_internal.h"
 #include "avr32dev1_internal.h"
 
 #ifdef CONFIG_ARCH_BUTTONS
@@ -75,8 +75,8 @@
 
 void up_buttoninit(void)
 {
-  (void)at91uc3_configgpio(PINMUX_GPIO_BUTTON1);
-  (void)at91uc3_configgpio(PINMUX_GPIO_BUTTON2);
+  (void)at32uc3_configgpio(PINMUX_GPIO_BUTTON1);
+  (void)at32uc3_configgpio(PINMUX_GPIO_BUTTON2);
 }
 
 /****************************************************************************
@@ -87,8 +87,8 @@ uint8_t up_buttons(void)
 {
   uint8_t retval;
 
-  retval  = at91uc3_gpioread(PINMUX_GPIO_BUTTON1) ? 0 : BUTTON1;
-  retval |= at91uc3_gpioread(PINMUX_GPIO_BUTTON2) ? 0 : BUTTON2;
+  retval  = at32uc3_gpioread(PINMUX_GPIO_BUTTON1) ? 0 : BUTTON1;
+  retval |= at32uc3_gpioread(PINMUX_GPIO_BUTTON2) ? 0 : BUTTON2;
 
   return retval;
 }

configs/avr32dev1/src/up_leds.c

@@ -40,7 +40,7 @@
 
 #include <nuttx/config.h>
 
-#include "at91uc3_internal.h"
+#include "at32uc3_internal.h"
 #include "avr32dev1_internal.h"
 
 #ifdef CONFIG_ARCH_LEDS
@@ -67,8 +67,8 @@
 
 void up_ledinitialize(void)
 {
-  at91uc3_configgpio(PINMUX_GPIO_LED1);
-  at91uc3_configgpio(PINMUX_GPIO_LED2);
+  at32uc3_configgpio(PINMUX_GPIO_LED1);
+  at32uc3_configgpio(PINMUX_GPIO_LED2);
 }
 
 /****************************************************************************
@@ -77,8 +77,8 @@ void up_ledinitialize(void)
 
 void up_ledon(int led)
 {
-  at91uc3_gpiowrite(PINMUX_GPIO_LED1, (led != 0));
-  at91uc3_gpiowrite(PINMUX_GPIO_LED2, (led == 2));
+  at32uc3_gpiowrite(PINMUX_GPIO_LED1, (led != 0));
+  at32uc3_gpiowrite(PINMUX_GPIO_LED2, (led == 2));
 }
 
 /****************************************************************************
@@ -87,7 +87,7 @@ void up_ledon(int led)
 
 void up_ledoff(int led)
 {
-  at91uc3_gpiowrite(PINMUX_GPIO_LED1, (led == 2));
-  at91uc3_gpiowrite(PINMUX_GPIO_LED2, false);
+  at32uc3_gpiowrite(PINMUX_GPIO_LED1, (led == 2));
+  at32uc3_gpiowrite(PINMUX_GPIO_LED2, false);
 }
 #endif /* CONFIG_ARCH_LEDS */