Add frame drawing logic

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1399 42af7a65-404d-4744-a932-0658087f49c3

graphics/nxtk/Make.defs

@@ -40,4 +40,5 @@ NXTKWIN_CSRCS	= nxtk_openwindow.c nxtk_closewindow.c nxtk_getposition.c \
 		  nxtk_bitmapwindow.c nxtk_events.c nxtk_setsubwindows.c
 NXTKTB_CSRCS	= nxtk_opentoolbar.c nxtk_closetoolbar.c nxtk_filltoolbar.c \
 		  nxtk_filltraptoolbar.c nxtk_movetoolbar.c nxtk_bitmaptoolbar.c
-NXTK_CSRCS	= $(NXTKWIN_CSRCS) $(NXTKTB_CSRCS) nxtk_subwindowclip.c nxtk_subwindowmove.c
\ No newline at end of file
+NXTK_CSRCS	= $(NXTKWIN_CSRCS) $(NXTKTB_CSRCS) nxtk_subwindowclip.c \
+		  nxtk_subwindowmove.c nxtk_drawframe.c

graphics/nxtk/nxtk_drawframe.c

+/****************************************************************************
+ * graphics/nxtk/nxtk_drawframe.c
+ *
+ *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/nxglib.h>
+#include <nuttx/nx.h>
+#include <nuttx/nxtk.h>
+
+#include "nxfe.h"
+#include "nxtk_internal.h"
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxtk_drawframeside
+ ****************************************************************************/
+
+static void nxtk_drawframeside(FAR struct nxtk_framedwindow_s *fwnd,
+                               FAR const struct nxgl_rect_s *side,
+                               FAR const struct nxgl_rect_s *bounds,
+                               nxgl_mxpixel_t color[CONFIG_NX_NPLANES])
+{
+  struct nxgl_rect_s intersection;
+  nxgl_rectintersect(&intersection, side, bounds);
+  if (!nxgl_nullrect(&intersection))
+    {
+      nx_fill((NXWINDOW)fwnd, &intersection, color);
+    }
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxtk_drawframe
+ *
+ * Description:
+ *   Redraw the window frame.
+ *
+ * Input parameters:
+ *   fwnd   - the framed window whose frame needs to be re-drawn.  This must
+ *            have been previously created by nxtk_openwindow().
+ *   bounds - Only draw the ports of the frame within this bounding box.
+ *            (window relative coordinates).
+ *
+ * Returned value:
+ *   OK on success; ERROR on failure with errno set appropriately
+ *
+ ****************************************************************************/
+
+int nxtk_drawframe(FAR struct nxtk_framedwindow_s *fwnd,
+                   FAR const struct nxgl_rect_s *bounds)
+{
+  struct nxgl_rect_s frame;
+  struct nxgl_size_s wndsize;
+  struct nxgl_size_s tbsize;
+
+  /* Get the size of the rectangle */
+
+  nxgl_rectsize(&wndsize, &fwnd->wnd.bounds);
+  nxgl_rectsize(&tbsize, &fwnd->tbrect);
+
+  /* Draw the top.  Thickness: CONFIG_NXTK_BORDERWIDTH-1, Color:
+   * CONFIG_NXTK_BORDERCOLOR1
+   */
+
+  frame.pt1.x = 0;
+  frame.pt2.x = wndsize.w - 1;
+
+  frame.pt1.y = 0;
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt2.y = CONFIG_NXTK_BORDERWIDTH - 2;
+#else
+  frame.pt2.y = CONFIG_NXTK_BORDERWIDTH - 1;
+#endif
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor1);
+
+  /* Draw a single line under the toolbar, color CONFIG_NXTK_BORDERCOLOR2 */
+
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt1.y += tbsize.h + CONFIG_NXTK_BORDERWIDTH - 1;
+  frame.pt2.y  = frame.pt1.y;
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor2);
+#endif
+
+  /* Draw the bottom.  First, thickness: CONFIG_NXTK_BORDERWIDTH-1, 
+   * Color: CONFIG_NXTK_BORDERCOLOR1
+   */
+
+  frame.pt1.y = wndsize.h - CONFIG_NXTK_BORDERWIDTH;
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt2.y = wndsize.h - 2;
+#else
+  frame.pt2.y = frame.pt1.y;
+#endif
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor1);
+
+  /* Then a single line at the very bottom, Color: CONFIG_NXTK_BORDERCOLOR2 */
+
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt1.y = wndsize.h - 1;
+  frame.pt2.y = frame.pt1.y;
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor2);
+#endif
+
+  /* Draw the outer left side.  Thickness: CONFIG_NXTK_BORDERWIDTH-1,
+   * Color: CONFIG_NXTK_BORDERCOLOR1
+   */
+
+  frame.pt1.y = 0;
+  frame.pt2.y = wndsize.h - 1;
+
+  frame.pt1.x = 0;
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt2.x = CONFIG_NXTK_BORDERWIDTH - 2;
+#else
+  frame.pt2.x = frame.pt1.x;
+#endif
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor1);
+
+  /* Draw the outer right side. Thickness: 1, Color: CONFIG_NXTK_BORDERCOLOR2 */
+
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt1.x = wndsize.w - 1;
+  frame.pt2.x = frame.pt1.x;
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor2);
+#endif
+
+  /* Draw the inner right side,  Thickness: 1, Color: CONFIG_NXTK_BORDERCOLOR2 */
+
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt1.y = CONFIG_NXTK_BORDERWIDTH - 1 + tbsize.h;
+#else
+  frame.pt1.y = CONFIG_NXTK_BORDERWIDTH + tbsize.h;
+#endif
+  frame.pt2.y = wndsize.h - CONFIG_NXTK_BORDERWIDTH - 1;
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt1.x = CONFIG_NXTK_BORDERWIDTH - 1;
+  frame.pt2.x = frame.pt1.x;
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor2);
+#endif
+
+  /* Draw the inner left side,  Thickness:  CONFIG_NXTK_BORDERWIDTH-1,
+   * Color: CONFIG_NXTK_BORDERCOLOR1
+ */
+
+#if CONFIG_NXTK_BORDERWIDTH > 1
+  frame.pt1.x = wndsize.w - CONFIG_NXTK_BORDERWIDTH;
+  frame.pt2.x = wndsize.w - 2;
+#else
+  frame.pt1.x = wndsize.w - 1;
+  frame.pt2.x = frame.pt1.x;
+#endif
+  nxtk_drawframeside(fwnd, &frame, bounds, g_bordercolor1);
+  return OK;
+}

graphics/nxtk/nxtk_events.c

@@ -108,6 +108,7 @@ static void nxtk_redraw(NXWINDOW hwnd, FAR const struct nxgl_rect_s *rect,
 {
   FAR struct nxtk_framedwindow_s *fwnd = (FAR struct nxtk_framedwindow_s *)hwnd;
   struct nxgl_rect_s intersection;
+  struct nxgl_rect_s relbounds;
 
   DEBUGASSERT(hwnd && rect && fwnd->fwcb);
 
@@ -120,7 +121,14 @@ static void nxtk_redraw(NXWINDOW hwnd, FAR const struct nxgl_rect_s *rect,
 
   if (fwnd->fwcb->redraw)
     {
-      nxgl_rectintersect(&intersection, &fwnd->fwrect, rect);
+      /* Convert the client window into a window relative rectangle, then
+       * get the intersection with the incoming rectangle.  That leaves the
+       * portion of the client window that needs to be updated.
+       */
+
+      nxgl_rectoffset(&relbounds, &fwnd->fwrect, -fwnd->fwrect.pt1.x, -fwnd->fwrect.pt1.y);
+      nxgl_rectintersect(&intersection, rect, &relbounds);
+
       gvdbg("nxtk_redraw: fwrect intersction={(%d,%d),(%d,%d)}\n",
            intersection.pt1.x, intersection.pt1.y,
            intersection.pt2.x, intersection.pt2.y);
@@ -137,7 +145,14 @@ static void nxtk_redraw(NXWINDOW hwnd, FAR const struct nxgl_rect_s *rect,
 
   if (fwnd->tbcb && fwnd->tbcb->redraw)
     {
-      nxgl_rectintersect(&intersection, &fwnd->tbrect, rect);
+      /* Convert the toolbar window into a window relative rectangle, then
+       * get the intersection with the incoming rectangle.  That leaves the
+       * portion of the toolbar window that needs to be updated.
+       */
+
+      nxgl_rectoffset(&relbounds, &fwnd->tbrect, -fwnd->tbrect.pt1.x, -fwnd->tbrect.pt1.y);
+      nxgl_rectintersect(&intersection, rect, &relbounds);
+
       gvdbg("nxtk_redraw: tbrect intersction={(%d,%d),(%d,%d)}\n",
            intersection.pt1.x, intersection.pt1.y,
            intersection.pt2.x, intersection.pt2.y);
@@ -148,7 +163,9 @@ static void nxtk_redraw(NXWINDOW hwnd, FAR const struct nxgl_rect_s *rect,
         }
     }
 
-#warning "Need to redraw frame as well"
+  /* Then draw the frame */
+
+  nxtk_drawframe(fwnd, rect);
 }
 
 /****************************************************************************
@@ -164,7 +181,7 @@ static void nxtk_position(NXWINDOW hwnd, FAR const struct nxgl_size_s *size,
   struct nxgl_size_s subwindowsize;
 
   gvdbg("nxtk_position: hwnd=%p size=(%d,%d) pos=(%d,%d) bounds={(%d,%d),(%d,%d)}\n",
-        hwnd, size->w, size->w, pos->x, pos->y,
+        hwnd, size->w, size->h, pos->x, pos->y,
         bounds->pt1.x, bounds->pt1.y, bounds->pt2.x, bounds->pt2.y);
 
   /* Recalculate the dimensions of the toolbar and client windows */

graphics/nxtk/nxtk_internal.h

@@ -54,7 +54,7 @@
 /* Configuration ************************************************************/
 
 #ifndef CONFIG_NXTK_BORDERWIDTH
-#  define CONFIG_NXTK_BORDERWIDTH 2
+#  define CONFIG_NXTK_BORDERWIDTH 4
 #endif
 
 #ifndef CONFIG_NXTK_BORDERCOLOR1
@@ -105,6 +105,11 @@ extern "C" {
 
 extern FAR const struct nx_callback_s g_nxtkcb;
 
+/* Frame border colors */
+
+extern nxgl_mxpixel_t g_bordercolor1[CONFIG_NX_NPLANES];
+extern nxgl_mxpixel_t g_bordercolor2[CONFIG_NX_NPLANES];
+
 /****************************************************************************
  * Public Function Prototypes
  ****************************************************************************/
@@ -173,6 +178,25 @@ EXTERN void nxtk_subwindowmove(FAR struct nxtk_framedwindow_s *fwnd,
                                FAR const struct nxgl_rect_s *srcrect,
                                FAR const struct nxgl_point_s *srcoffset,
                                FAR const struct nxgl_rect_s *bounds);
+/****************************************************************************
+ * Name: nxtk_drawframe
+ *
+ * Description:
+ *   Redraw the window frame.
+ *
+ * Input parameters:
+ *   fwnd   - the framed window whose frame needs to be re-drawn.  This must
+ *            have been previously created by nxtk_openwindow().
+ *   bounds - Only draw the ports of the frame within this bounding box.
+ *            (window relative coordinates).
+ *
+ * Returned value:
+ *   OK on success; ERROR on failure with errno set appropriately
+ *
+ ****************************************************************************/
+
+EXTERN int nxtk_drawframe(FAR struct nxtk_framedwindow_s *fwnd,
+                          FAR const struct nxgl_rect_s *bounds);
 #undef EXTERN
 #if defined(__cplusplus)
 }

graphics/nxtk/nxtk_openwindow.c

@@ -65,6 +65,22 @@
  * Public Data
  ****************************************************************************/
 
+nxgl_mxpixel_t g_bordercolor1[CONFIG_NX_NPLANES] =
+{
+  CONFIG_NXTK_BORDERCOLOR1
+#if CONFIG_NX_NPLANES > 1
+#  error "Multiple corder colors not defined"
+#endif
+};
+
+nxgl_mxpixel_t g_bordercolor2[CONFIG_NX_NPLANES] =
+{
+  CONFIG_NXTK_BORDERCOLOR2
+#if CONFIG_NX_NPLANES > 1
+#  error "Multiple border colors not defined"
+#endif
+};
+
 /****************************************************************************
  * Private Functions
  ****************************************************************************/