All framework for lpc313x boot initialization

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2453 42af7a65-404d-4744-a932-0658087f49c3

arch/arm/src/lpc313x/Make.defs

@@ -50,5 +50,6 @@ CGU_CSRCS	= lpc313x_clkdomain.c lpc313x_clkfreq.c lpc313x_esrndx.c \
 		  lpc313x_fdcndx.c lpc313x_softreset.c
 
 CHIP_ASRCS	= $(CGU_ASRCS)
-CHIP_CSRCS	= lpc313x_allocateheap.c lpc313x_irq.c lpc313x_lowputc.c \
-		  lpc313x_serial.c lpc313x_timerisr.c $(CGU_CSRCS)
+CHIP_CSRCS	= lpc313x_allocateheap.c lpc313x_boot.c lpc313x_irq.c \
+		  lpc313x_lowputc.c lpc313x_serial.c lpc313x_timerisr.c \
+		  $(CGU_CSRCS)

arch/arm/src/lpc313x/lpc313x_boot.c

+/************************************************************************************
+ * arch/arm/src/lpc313x/lpc313x_boot.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <stdint.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm.h"
+#include "up_internal.h"
+#include "up_arch.h"
+
+/************************************************************************************
+ * Private Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Types
+ ************************************************************************************/
+
+struct section_mapping_s
+{
+  uint32_t physbase;   /* Physical address of the region to be mapped */
+  uint32_t virtbase;   /* Virtual address of the region to be mapped */
+  uint32_t mmuflags;   /* MMU settings for the region (e.g., cache-able) */
+  uint32_t nsections;  /* Number of mappings in the region */
+};
+
+/************************************************************************************
+ * Public Variables
+ ************************************************************************************/
+
+extern uint32_t _vector_start; /* Beginning of vector block */
+extern uint32_t _vector_end;   /* End+1 of vector block */
+
+/************************************************************************************
+ * Private Variables
+ ************************************************************************************/
+
+#warning "All MMU logic commented out"
+#if 0 /* Not ready yet */
+static const struct section_mapping_s section_mapping[] =
+{
+  { DM320_PERIPHERALS_PSECTION, DM320_PERIPHERALS_VSECTION, 
+    DM320_PERIPHERALS_MMUFLAGS, DM320_PERIPHERALS_NSECTIONS},
+  { DM320_FLASH_PSECTION,       DM320_FLASH_VSECTION, 
+    DM320_FLASH_MMUFLAGS,       DM320_FLASH_NSECTIONS},
+  { DM320_CFI_PSECTION,         DM320_CFI_VSECTION, 
+    DM320_CFI_MMUFLAGS,         DM320_CFI_NSECTIONS},
+  { DM320_SSFDC_PSECTION,       DM320_SSFDC_VSECTION, 
+    DM320_SSFDC_MMUFLAGS,       DM320_SSFDC_NSECTIONS},
+  { DM320_CE1_PSECTION,         DM320_CE1_VSECTION, 
+    DM320_CE1_MMUFLAGS,         DM320_CE1_NSECTIONS},
+  { DM320_CE2_PSECTION,         DM320_CE2_VSECTION, 
+    DM320_CE2_MMUFLAGS,         DM320_CE2_NSECTIONS},
+  { DM320_VLYNQ_PSECTION,       DM320_VLYNQ_VSECTION, 
+    DM320_VLYNQ_MMUFLAGS,       DM320_VLYNQ_NSECTIONS},
+  { DM320_USBOTG_PSECTION,      DM320_USBOTG_VSECTION, 
+    DM320_USBOTG_MMUFLAGS,      DM320_USBOTG_NSECTIONS}
+};
+#define NMAPPINGS (sizeof(section_mapping) / sizeof(struct section_mapping_s))
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: up_setlevel1entry
+ ************************************************************************************/
+
+static inline void up_setlevel1entry(uint32_t paddr, uint32_t vaddr, uint32_t mmuflags)
+{
+  uint32_t *pgtable = (uint32_t*)PGTABLE_BASE_VADDR;
+  uint32_t  index   = vaddr >> 20;
+
+  /* Save the page table entry */
+
+  pgtable[index]  = (paddr | mmuflags);
+}
+
+/************************************************************************************
+ * Name: up_setlevel2coarseentry
+ ************************************************************************************/
+
+static inline void up_setlevel2coarseentry(uint32_t ctabvaddr, uint32_t paddr,
+                                           uint32_t vaddr, uint32_t mmuflags)
+{
+  uint32_t *ctable  = (uint32_t*)ctabvaddr;
+  uint32_t  index;
+
+  /* The coarse table divides a 1Mb address space up into 256 entries, each
+   * corresponding to 4Kb of address space.  The coarse page table index is
+   * related to the offset from the beginning of 1Mb region.
+   */
+
+  index = (vaddr & 0x000ff000) >> 12;
+
+  /* Save the coarse table entry */
+
+  ctable[index] = (paddr | mmuflags);
+}
+
+/************************************************************************************
+ * Name: up_setupmappings
+ ************************************************************************************/
+
+static void up_setupmappings(void)
+{
+  int i, j;
+
+  for (i = 0; i < NMAPPINGS; i++)
+    {
+      uint32_t sect_paddr = section_mapping[i].physbase;
+      uint32_t sect_vaddr = section_mapping[i].virtbase;
+      uint32_t mmuflags   = section_mapping[i].mmuflags;
+
+      for (j = 0; j < section_mapping[i].nsections; j++)
+        {
+          up_setlevel1entry(sect_paddr, sect_vaddr, mmuflags);
+          sect_paddr += SECTION_SIZE;
+          sect_vaddr += SECTION_SIZE;
+        }
+    }
+}
+
+/************************************************************************************
+ * Name: up_vectormapping
+ ************************************************************************************/
+
+static void up_vectormapping(void)
+{
+  uint32_t vector_paddr = DM320_IRAM_PADDR;
+  uint32_t vector_vaddr = DM320_VECTOR_VADDR;
+  uint32_t end_paddr    = vector_paddr + DM320_IRAM_SIZE;
+
+  /* We want to keep our interrupt vectors and interrupt-related logic in zero-wait
+   * state internal RAM (IRAM).  The DM320 has 16Kb of IRAM positioned at physical
+   * address 0x0000:0000; we need to map this to 0xffff:0000.
+   */
+
+  while (vector_paddr < end_paddr)
+    {
+      up_setlevel2coarseentry(PGTABLE_COARSE_BASE_VADDR,
+                                  vector_paddr,
+                                  vector_vaddr,
+                                  MMU_L2_VECTORFLAGS);
+      vector_paddr += 4096;
+      vector_vaddr += 4096;
+    }
+
+  /* Now set the level 1 descriptor to refer to the level 2 coarse page table. */
+
+  up_setlevel1entry(PGTABLE_COARSE_BASE_PADDR,
+                        DM320_VECTOR_VCOARSE,
+                        MMU_L1_VECTORFLAGS);
+}
+
+/************************************************************************************
+ * Name: up_copyvectorblock
+ ************************************************************************************/
+
+static void up_copyvectorblock(void)
+{
+  uint32_t *src  = (uint32_t*)&_vector_start;
+  uint32_t *end  = (uint32_t*)&_vector_end;
+  uint32_t *dest = (uint32_t*)VECTOR_BASE;
+
+  while (src < end)
+    {
+      *dest++ = *src++;
+    }
+}
+#endif /* 0 */
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+void up_boot(void)
+{
+#warning "All MMU logic commented out"
+#if 0 /* Not ready yet */
+  /* __start provided the basic MMU mappings for SDRAM.  Now provide mappings for all
+   * IO regions (Including the vector region).
+   */
+
+  up_setupmappings();
+
+  /* Provide a special mapping for the IRAM interrupt vector positioned in high
+   * memory.
+   */
+
+  up_vectormapping();
+
+  /* Setup up vector block.  _vector_start and _vector_end are exported from
+   * up_vector.S
+   */
+
+  up_copyvectorblock();
+#endif /* 0 */
+
+  /* Perform chip common initialization (might do nothing) */
+
+  lpc313x_lowsetup();
+
+  /* Perform early serial initialization if we are going to use the serial driver */
+
+#ifdef CONFIG_USE_EARLYSERIALINIT
+  up_earlyserialinit();
+#endif
+
+  /* Perform board-specific initialization */
+
+#ifdef CONFIG_ARCH_LEDS
+  lpc313x_boardinitialize();
+#endif
+}

arch/arm/src/lpc313x/lpc313x_internal.h

@@ -83,6 +83,16 @@ extern "C" {
  * Public Function Prototypes
  ************************************************************************************/
 
+/************************************************************************************
+ * Name: lpc313x_lowsetup
+ *
+ * Description:
+ *   Called early in up_boot.  Performs chip-common low level initialization.
+ *
+ ************************************************************************************/
+
+EXTERN void lpc313x_lowsetup(void);
+
 /************************************************************************************
  * Name: lpc313x_clockconfig
  *

arch/arm/src/lpc313x/lpc313x_lowputc.c

@@ -55,6 +55,38 @@
  * Definitions
  ****************************************************************************/
 
+/* Configuration ************************************************************/
+
+/* Is the UART enabled? */
+
+#ifdef CONFIG_LPC313X_UART
+#  define HAVE_UART 1
+
+/* Is it a serial console? */
+
+#  ifdef CONFIG_UART_SERIAL_CONSOLE
+#    define HAVE_CONSOLE 1
+
+     /* Is initialization performed by up_earlyserialinit()?  Or is UART
+      * initialization suppressed?
+      */
+
+#    if defined(CONFIG_USE_EARLYSERIALINIT) || defined(CONFIG_SUPPRESS_LPC313X_UART_CONFIG)
+#      undef NEED_LOWSETUP
+#    else
+#      define NEED_LOWSETUP 1
+#    endif
+#  else
+#      undef HAVE_CONSOLE
+#      undef NEED_LOWSETUP
+#  endif
+
+#else
+#  undef HAVE_UART
+#  undef HAVE_CONSOLE
+#  undef NEED_LOWSETUP
+#endif
+
 /****************************************************************************
  * Private Types
  ****************************************************************************/
@@ -71,6 +103,7 @@
  * Name: up_waittxready
  ****************************************************************************/
 
+#ifdef HAVE_CONSOLE
 static inline void up_waittxready(void)
 {
   int tmp;
@@ -89,12 +122,13 @@ static inline void up_waittxready(void)
         }
     }
 }
+#endif
 
 /****************************************************************************
  * Name: up_configbaud
  ****************************************************************************/
 
-#ifndef CONFIG_USE_EARLYSERIALINIT
+#ifdef NEED_LOWSETUP
 static inline void up_configbaud(void)
 {
   /* In a buckled-up, embedded system, there is no reason to constantly
@@ -228,22 +262,22 @@ static inline void up_configbaud(void)
              LPC313X_UART_FDR);
 #endif
 }
+#endif
 
 /****************************************************************************
  * Public Functions
  ****************************************************************************/
 /****************************************************************************
- * Name: up_lowsetup
+ * Name: lpc313x_lowsetup
  *
  * Description:
- *   Configure the UART baud, bits, parity, fifos, etc. This method is called
- *   the first time that the serial port is opened.
+ *   Called early in up_boot.  Performs chip-common low level initialization.
  *
  ****************************************************************************/
 
-void up_lowsetup(void)
+void lpc313x_lowsetup(void)
 {
-#ifndef CONFIG_SUPPRESS_LPC313X_UART_CONFIG
+#ifdef NEED_LOWSETUP
   uint32_t regval;
 
   /* Enable UART system clock */
@@ -304,7 +338,6 @@ void up_lowsetup(void)
   putreg32('\0', LPC313X_UART_THR);
 #endif
 }
-#endif
 
 /****************************************************************************
  * Public Functions
@@ -320,6 +353,8 @@ void up_lowsetup(void)
 
 void up_lowputc(char ch)
 {
+#ifdef HAVE_CONSOLE
   up_waittxready();
   putreg32((uint32_t)ch, LPC313X_UART_THR);
+#endif
 }