Add OpenOCD notes

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2538 42af7a65-404d-4744-a932-0658087f49c3

configs/ea3131/README.txt

@@ -194,6 +194,31 @@ Image Format
   If you don't use setenv.sh, then just set your PATH variable appropriately or
   use the full path to mklpc.sh in the final step.
 
+OpenOCD
+^^^^^^^
+
+  I have been using the Olimex ARM-USB-OCD JTAG debugger with the EA3131
+  (http://www.olimex.com).  The OpenOCD configuration file is here:
+  tools/armusbocb.cfg.  There is also a script on the tools directory that
+  I used to start the OpenOCD daemon on my system called oocd.sh.  That
+  script would probably require some modifications to work in another
+  environment:
+  
+    - possibly the value of OPENOCD_PATH
+    - If you are working under Linux you will need to change any
+      occurances of `cygpath -w blablabla` to just blablabla
+
+  Then you should be able to start the OpenOCD daemon like:
+
+    tools/oocd.sh <topdir>
+
+  Where <topdir> is the directory where NuttX is installed.
+
+  Once the OpenOCD daemon has been started, you can connect to it via
+  GDB using the following GDB command:
+
+   (gdb) target remote localhost:3333
+
 ARM/EA3131-specific Configuration Options
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 	CONFIG_ARCH - Identifies the arch/ subdirectory.  This should

configs/ea3131/tools/armusbocd.cfg

+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+#interface
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG A"
+ft2232_layout "olimex-jtag"
+ft2232_vid_pid 0x15BA 0x0003
+jtag_speed 2
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst separate
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm9ejs <reset mode> <chainpos> <endianness> <variant>
+target arm926ejs little run_and_halt 0 arm926ejs
+run_and_halt_time 0 30
+
+#target_script 0 reset oocd_flash2138.script
+working_area 0 0x1102800 0x60000 nobackup
+
+#flash configuration
+#flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v2 12000 calc_checksum
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger

configs/ea3131/tools/oocd.sh

+#!/bin/sh
+
+TOPDIR=$1
+USAGE="$0 <TOPDIR> [-d]"
+if [ -z "${TOPDIR}" ]; then
+	echo "Missing argument"
+	echo $USAGE
+	exit 1
+fi
+
+OPENOCD_PATH="/cygdrive/c/gccfd/openocd/bin"
+OPENOCD_EXE=openocd-ftd2xx.exe
+OPENOCD_CFG="${TOPDIR}/configs/ea3131/tools/armusbocd.cfg"
+OPENOCD_ARGS="-f `cygpath -w ${OPENOCD_CFG}`"
+~/projects/nuttx/nuttx/configs/ea3131/tool
+
+if [ "X$2" = "X-d" ]; then
+	OPENOCD_ARGS=$OPENOCD_ARGS" -d3"
+	set -x
+fi
+
+if [ ! -d ${OPENOCD_PATH} ]; then
+	echo "OpenOCD path does not exist: ${OPENOCD_PATH}"
+	exit 1
+fi
+if [ ! -x ${OPENOCD_PATH}/${OPENOCD_EXE} ]; then
+	echo "OpenOCD does not exist: ${OPENOCD_PATH}/${OPENOCD_EXE}"
+	exit 1
+fi
+if [ ! -f ${OPENOCD_CFG} ]; then
+	echo "OpenOCD config file does not exist: ${OPENOCD_CFG}"
+	exit 1
+fi
+
+echo "Starting OpenOCD"
+${OPENOCD_PATH}/${OPENOCD_EXE} ${OPENOCD_ARGS} &
+echo "OpenOCD daemon started"
+ps -ef | grep openocd
+echo "In GDB: target remote localhost:3333"
+
+
+
+