More ST5767 LCD files missed in last commit

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5773 42af7a65-404d-4744-a932-0658087f49c3

drivers/lcd/st7567.h

+/**************************************************************************************
+ * drivers/lcd/st7567.h
+ *
+ * Definitions for the ST7567 128x64 Dot Matrix LCD
+ * Driver with C
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: Manikandan <code@zilogic.com>
+ *
+ * Based on drivers/lcd/ssd1305.h
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * References: SSD1305.pdf, "Solomon Systech SSD1305 136x64 Dot Matrix OLED/PLED
+ *             Segment/Common Driver with Controller," Solomon Systech Limited,
+ *             http://www.solomon-systech.com, May, 2008.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************************/
+
+#ifndef __DRIVERS_LCD_ST7567_H
+#define __DRIVERS_LCD_ST7567_H
+
+/**************************************************************************************
+ * Included Files
+ **************************************************************************************/
+
+/**************************************************************************************
+ * Pre-processor Definitions
+ **************************************************************************************/
+
+/* Fundamental Commands *****************************************************/
+
+#define ST7567_DISPOFF             0xae /* 0xae: Display OFF (sleep mode) */
+#define ST7567_DISPON              0xaf /* 0xaf: Display ON in normal mode */
+
+#define ST7567_SETSTARTLINE        0x40 /* 0x40-7f: Set display start line */
+#  define ST7567_STARTLINE_MASK    0x3f
+
+#define ST7567_SETPAGESTART        0xb0 /* 0xb0-b7: Set page start address */
+#  define ST7567_PAGESTART_MASK    0x07
+
+#define ST7567_SETCOLL             0x00 /* 0x00-0x0f: Set lower column address */
+#  define ST7567_COLL_MASK         0x0f
+#define ST7567_SETCOLH             0x10 /* 0x10-0x1f: Set higher column address */
+#  define ST7567_COLH_MASK         0x0f
+
+#define SSD1305_MAPCOL0            0xa0 /* 0xa0: Column address 0 is mapped to SEG0 */
+#define SSD1305_MAPCOL128          0xa1 /* 0xa1: Column address 128 is mapped to SEG0 */
+
+#define ST7567_DISPNORMAL          0xa6 /* 0xa6: Normal display */
+#define ST7567_DISPINVERSE         0xa7 /* 0xa7: Inverse display */
+
+#define ST7567_DISPRAM             0xa4 /* 0xa4: Resume to RAM content display */
+#define ST7567_DISPENTIRE          0xa5 /* 0xa5: Entire display ON */
+
+#define ST7567_BIAS_1_9            0xa2 /* 0xa2: Select BIAS setting 1/9 */
+#define ST7567_BIAS_1_7            0xa3 /* 0xa3: Select BIAS setting 1/7 */
+
+#define ST7567_ENTER_RMWMODE       0xe0 /* 0xe0: Enter the Read Modify Write mode */
+#define ST7567_EXIT_RMWMODE        0xee /* 0xee: Leave the Read Modify Write mode */
+#define ST7567_EXIT_SOFTRST        0xe2 /* 0xe2: Software RESET */
+
+#define ST7567_SETCOMNORMAL        0xc0 /* 0xc0: Set COM output direction, normal mode */
+#define ST7567_SETCOMREVERSE       0xc8 /* 0xc8: Set COM output direction, reverse mode */
+
+#define ST7567_POWERCTRL_VF        0x29 /* 0x29: Control built-in power circuit */
+#define ST7567_POWERCTRL_VR        0x2a /* 0x2a: Control built-in power circuit */
+#define ST7567_POWERCTRL_VB        0x2c /* 0x2c: Control built-in power circuit */
+#define ST7567_POWERCTRL           0x2f /* 0x2c: Control built-in power circuit */
+
+#define ST7567_REG_RES_RR0         0x21 /* 0x21: Regulation Resistior ratio */
+#define ST7567_REG_RES_RR1         0x22 /* 0x22: Regulation Resistior ratio */
+#define ST7567_REG_RES_RR2         0x24 /* 0x24: Regulation Resistior ratio */
+
+#define ST7567_SETEV               0x81 /* 0x81: Set contrast control */
+
+#define ST7567_SETBOOSTER          0xf8 /* Set booster level */
+#define ST7567_SETBOOSTER4X        0x00 /* Set booster level */
+#define ST7567_SETBOOSTER5X        0x01 /* Set booster level */
+
+#define ST7567_NOP                 0xe3 /* 0xe3: NOP Command for no operation */
+
+#endif /* __DRIVERS_LCD_ST7567_H */

include/nuttx/lcd/st7567.h

+/****************************************************************************
+ * include/nuttx/lcd/st7567.h
+ *
+ * Driver for the TM12864J1CCWGWA Display with the ST7567 LCD
+ * controller.
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: Manikandan <code@zilogic.com>
+ *
+ * Based on include/nuttx/lcd/ug-9664hswag01.h
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __INCLUDE_NUTTX_ST7567_H
+#define __INCLUDE_NUTTX_ST7567_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <stdbool.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* ST7567 Configuration Settings:
+ *
+ * CONFIG_ST7567_SPIMODE - Controls the SPI mode
+ * CONFIG_ST7567_FREQUENCY - Define to use a different bus frequency
+ * CONFIG_ST7567_NINTERFACES - Specifies the number of physical
+ *   ST7567 devices that will be supported.  NOTE:  At present, this
+ *   must be undefined or defined to be 1.
+ * CONFIG_ST7567_POWER
+ *   If the hardware supports a controllable LCD a power supply, this
+ *   configuration shold be defined.  (See st7567_power() below).
+ *
+ * Required LCD driver settings:
+ * CONFIG_LCD_ST7567 - Enable ST7567 support
+ * CONFIG_LCD_MAXCONTRAST should be 255, but any value >0 and <=255 will be accepted.
+ * CONFIG_LCD_MAXPOWER should be 2:  0=off, 1=dim, 2=normal
+ *
+ * Required SPI driver settings:
+ * CONFIG_SPI_CMDDATA - Include support for cmd/data selection.
+ */
+
+/* Some important "colors" */
+
+#define ST7567_Y1_BLACK  0
+#define ST7567_Y1_WHITE  1
+
+/* Only two power settings are supported: */
+
+#define ST7567_POWER_OFF 0
+#define ST7567_POWER_ON  1
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name:  st7567_initialize
+ *
+ * Description:
+ *   Initialize the ST7567 video hardware.  The initial state of the
+ *   LCD is fully initialized, display memory cleared, and the LCD ready
+ *   to use, but with the power setting at 0 (full off == sleep mode).
+ *
+ * Input Parameters:
+ *
+ *   spi - A reference to the SPI driver instance.
+ *   devno - A value in the range of 0 throst7567h CONFIG_ST7567_NINTERFACES-1.
+ *     This allows support for multiple LCD devices.
+ *
+ * Returned Value:
+ *
+ *   On success, this function returns a reference to the LCD object for
+ *   the specified LCD.  NULL is returned on any failure.
+ *
+ ****************************************************************************/
+
+struct lcd_dev_s; /* see nuttx/lcd.h */
+struct spi_dev_s; /* see nuttx/spi.h */
+FAR struct lcd_dev_s *st7567_initialize(FAR struct spi_dev_s *spi, unsigned int devno);
+
+/****************************************************************************
+ * Name:  st7567_power
+ *
+ * Description:
+ *   If the hardware supports a controllable LCD a power supply, this
+ *   interface should be provided.  It may be called by the driver to turn
+ *   the LCD power on and off as needed.
+ *
+ * Input Parameters:
+ *
+ *   devno - A value in the range of 0 throuh CONFIG_ST7567_NINTERFACES-1.
+ *     This allows support for multiple LCD devices.
+ *   on - true:turn power on, false: turn power off.
+ *
+ * Returned Value:
+ *   None
+ *
+ **************************************************************************************/
+
+#ifdef CONFIG_ST7567_POWER
+void st7567_power(unsigned int devno, bool on);
+#else
+#  define st7567_power(a,b)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __INCLUDE_NUTTX_ST7567_H */