configs: add Particle Photon board support

Approved-by: Gregory Nutt

Priority Inversion fixes

Approved-by: Gregory Nutt

All STM32 host drivers.  In IN endpoint retry, delay for a clock tick to give some breathing space for the CPU.  EXPERIMENTAL change.

STM32, STM32 F7, and STM32 L4: Clone Freddie Chopin's I2C change to similar STM32 I2C drivers.

Approved-by: Gregory Nutt

Priority inheritance:  When CONFIG_SEM_PREALLOCHOLDERS==0, there is only a single, hard-allocated holder structure.  This is problem because in sem_wait() the holder is released, but needs to remain in the holder container until sem_restorebaseprio() is called.  The call to sem_restorebaseprio() must be one of the last things the sem_wait() does because it can cause the task to be suspended. If in sem_wait(), a new task gets the semaphore count then it will fail to allocate the holder and will not participate in priority inheritance.  This fix is to add two hard-allocated holders in the sem_t structure:  One of the old holder and one for the new holder.

pthreads:  Fix pthread_mutexattr_init().  It was not initializing the protocol field when priority inheritance is enabled.

   Save elapsed time before handling I2C in stm32_i2c_sem_waitstop()
   This patch follows the same logic as in previous fix to
   stm32_i2c_sem_waitdone().
   It is possible that a context switch occurs after I2C registers are read
   but before elapsed time is saved in stm32_i2c_sem_waitstop(). It is then
   possible that the registers were read only once with "elapsed time"
   equal 0. When scheduler resumes this thread it is quite possible that
   now "elapsed time" will be well above timeout threshold. In that case
   the function returns and reports a timeout, even though the registers
   were not read "recently".
   Fix this by inverting the order of operations in the loop - save elapsed
   time before reading registers. This way a context switch anywhere in the
   loop will not cause an erroneous "timeout" error.

This patch follows the same logic as in previous fix to
stm32_i2c_sem_waitdone().

It is possible that a context switch occurs after I2C registers are read
but before elapsed time is saved in stm32_i2c_sem_waitstop(). It is then
possible that the registers were read only once with "elapsed time"
equal 0. When scheduler resumes this thread it is quite possible that
now "elapsed time" will be well above timeout threshold. In that case
the function returns and reports a timeout, even though the registers
were not read "recently".

Fix this by inverting the order of operations in the loop - save elapsed
time before reading registers. This way a context switch anywhere in the
loop will not cause an erroneous "timeout" error.

apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS.  Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.

STM32, STM32 F7, STM32 L4:  OTG host drivers: Do not do data toggle if interrupt transfer is NAKed.  Sugested by webbbn@gmail.com

Remove all references to arch_usbhost_initialize().  That was incorrectly called from apps/examples/hidkbd.  That is violation of the OS interfacing rules and will no longer be supported.  USB host should be initialized as part of the board bring-up logic was with any other devices and should not involve illegal calls from applications into the OS.

STM32F2: add USB OTG HS support for stm32f20xxx cores

Approved-by: Gregory Nutt

STM32, STM32 F7, and STM32 L4:  Back out part of 3331e9c4.  Returning immediately int he case of a NAK makes the Mass Storage Class driver unreliable.  The retry/timeout logic is necessary.  This implementation tries to implement a compromise:  If a NAK is received after some data is received, then the partial data received is returned as with 3331e9c4.  If if a NAK is received with no data, then no longer returns the NAK error immediately but retries until data is received or a timeout occurs.  Initial testing indicates that this fixes the issues the MSC.  However, I hae concerns that if multiple sectors are read in one transfer, there could be NAKs between sectors as well and, in that case, then change will still cause failures.

Olimex STM32 P407: USB host support for USB FLASH sticks is now supported in the base nsh configuration.

Kinetis:Allow Board to add Pullups on SDHC lines

Approved-by: Gregory Nutt