- May 19, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories.
-
Alan Carvalho de Assis authored
configs/stm32f4discovery/include/board.h: Add SPI DMA pins definitions to get CS43L22 audio DAC working configs/stm32f4discovery/audio: Add board configuration for CS43L22 audio example configs/stm32f4discovery: Update README
-
- May 18, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Gregory Nutt authored
include/nuttx/video/fb.h: No, I was right the first time. sys/types.h is needed in some inclusion contexts.
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Gregory Nutt authored
include/nuttx/video/fb.h: Make type used for overlay number consistent; Use standardized types (size_t and fb_coord_t) whenever possible.
-
Dmitriy Linikov authored
As with the MCU temperature and VREFINT measurement, this patch requires user to enable the corresponding channel first. For Vbat channel the ioctl cmd is IO_ENABLE_DISABLE_VBAT_CH, and its arg should be a pointer to bool which must be true to enable and false to disable the Vbat channel. Moreover, since Vbat input contains a built-in voltage divider, it is highly suggested to disable Vbat input channel after measurement is done in order to prevent battery drain through the divider.
-
- May 17, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Gregory Nutt authored
Recent changes to UDP in order to correct problems with UDP connection mode introduced a new bug: The 'to' address passed to sendto() must now be NULL in connection mode. But there are errors because there was one place where the 'to' address was still being used. This commit adds logic to first check for UDP connection mode. If the UDP socket is connected, then the NULL 'to' address is ignored and saved connection address is used instead.
-
Anthony Merlino authored
net/sixlowpan: TCP send should have PSH and ACK flags set when sending. This matches the standard network (Ethernet) TCP send logic.
-
- May 16, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
arch/arm/src/imxrt: Add framework for eDMA support. Initial port is a rip off from the SAMA5Dx and is little more than the framework for the DMA support.
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Jake Choy authored
-
Gregory Nutt authored
-
- May 15, 2018
-
-
Gregory Nutt authored
-
William Douglas authored
commit 7fd1f0d78546fa0315f4077b779efdd884e5bd53 Author: William Douglas <william@rocklandscientific.com> Date: Tue May 15 13:19:31 2018 -0700 Add support for the second SDMMC device. The second SDMMC device was already supported but the clock was never enabled. This fixes that.
-
Gregory Nutt authored
-
Anthony Merlino authored
sixlowpan: Preserve big-endian (network order) when uncompressing address. This change is the counterpart to another recent endianness fix that occurred on compression of the ip address. Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Jake Choy authored
-
Gregory Nutt authored
arch/arm/src/imxrt: Add missing support for the Cortex-M7 caches; configs/imxrt1050-evk: Enable I- and D-Caches in the nsh configuration. Calibrate the delay loop. Add support for the on-board LED.
-
Gregory Nutt authored
arch/arm/src/imxrt/imxrt_serial.c: Fix some interrupt instabilities; must be in a critical section when modifying serial interrupts. configs/imxrt1050-evk/nsh/defconfig: Use the BASEPRI register to enable/disable interrupts; enable the PROCFS file system.
-
Juha Niskanen authored
-
Gregory Nutt authored
-
- May 14, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
-
Anthony Merlino authored
configs/photon: Fixes build error introduced in recent rgbled changes. Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Anthony Merlino authored
Photon rgbled fix * configs/photon: Simplifies RGB led start-up logic. * configs/photon: RGB led on Photon is common anode. CONFIGS_RGBLED_INVERT is now enabled Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Anthony Merlino authored
rgbled: Fixes led issues caused by uninitialized memory with CONFIG_RGBLED_MULTICHAN. The uninitialized pwm_info_s struct caused a rogue channel to be started causing errros in the pwm driver Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Gregory Nutt authored
-
- May 13, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
-