pthreads:  Fix pthread_mutexattr_init().  It was not initializing the protocol field when priority inheritance is enabled.

This patch follows the same logic as in previous fix to
stm32_i2c_sem_waitdone().

It is possible that a context switch occurs after I2C registers are read
but before elapsed time is saved in stm32_i2c_sem_waitstop(). It is then
possible that the registers were read only once with "elapsed time"
equal 0. When scheduler resumes this thread it is quite possible that
now "elapsed time" will be well above timeout threshold. In that case
the function returns and reports a timeout, even though the registers
were not read "recently".

Fix this by inverting the order of operations in the loop - save elapsed
time before reading registers. This way a context switch anywhere in the
loop will not cause an erroneous "timeout" error.

apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS.  Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.

STM32, STM32 F7, STM32 L4:  OTG host drivers: Do not do data toggle if interrupt transfer is NAKed.  Sugested by webbbn@gmail.com

Remove all references to arch_usbhost_initialize().  That was incorrectly called from apps/examples/hidkbd.  That is violation of the OS interfacing rules and will no longer be supported.  USB host should be initialized as part of the board bring-up logic was with any other devices and should not involve illegal calls from applications into the OS.

STM32F2: add USB OTG HS support for stm32f20xxx cores

Approved-by: Gregory Nutt

STM32, STM32 F7, and STM32 L4:  Back out part of 3331e9c4.  Returning immediately int he case of a NAK makes the Mass Storage Class driver unreliable.  The retry/timeout logic is necessary.  This implementation tries to implement a compromise:  If a NAK is received after some data is received, then the partial data received is returned as with 3331e9c4.  If if a NAK is received with no data, then no longer returns the NAK error immediately but retries until data is received or a timeout occurs.  Initial testing indicates that this fixes the issues the MSC.  However, I hae concerns that if multiple sectors are read in one transfer, there could be NAKs between sectors as well and, in that case, then change will still cause failures.

Olimex STM32 P407: USB host support for USB FLASH sticks is now supported in the base nsh configuration.

Kinetis:Allow Board to add Pullups on SDHC lines

Approved-by: Gregory Nutt

It is possible that a context switch occurs after stm32_i2c_isr() call
but before elapsed time is saved in stm32_i2c_sem_waitdone(). It is then
possible that the handling code was executed only once with "elapsed
time" equal 0. When scheduler resumes this thread it is quite possible
that now "elapsed time" will be well above timeout threshold. In that
case the function returns and reports a timeout, even though the
handling code was not executed "recently".

Fix this by inverting the order of operations in the loop - save elapsed
time before handling I2C. This way a context switch anywhere in the loop
will not cause an erroneous "timeout" error.

fix as5048b by adding missing frequency parameter

Approved-by: Gregory Nutt

increase number of supported PWM channels from 4 to 6

Approved-by: Gregory Nutt

actually write modified value to register

Approved-by: Gregory Nutt

use correct macro for irqid (fortunately both point to LPC43_IRQ_EXTINT+18)

Approved-by: Gregory Nutt

fix logic in preprocessor checks and correct arguments to lpc43_pin_config initialization

Approved-by: Gregory Nutt

fix logic error in lpc43_adc

Approved-by: Gregory Nutt

Fix errors in LPC43 SCT and SGPIO headers.

Approved-by: Gregory Nutt

rename LPC43_GPDMA_GLOBAL_CONFIG (already slipped previous commit C file); fix GPDMA_CONTROL_SBSIZE_*, improve usability of GPDMA_CONTROL_{S,D} macros

Approved-by: Gregory Nutt

add missing PINCONF_INBUFFER in several places of lpc4310203050_pinconfig.h

Approved-by: Gregory Nutt