drivers/sensors/max31855: Add multiple max31855 sensors feature and support for bambino-200e and stm32f4discovery

add generic upper-half motor driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>

Squashed merge of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    drivers/sensors:  Fix some minor typos in last commit that cause some compile problems.
    drivers/sensors/:  Clean up some coding standard isses in LM330 and ADXL372 drivers.
    drivers/sensors/README.txt:  Clean up some long lines and odd line breaks.
    include/nuttx/sensors:  Completes coding style review of adxl372.h, cluster_driver.h, and lsm330.h.

Author: Bob Feretich <bob.feretich@rafresearch.com>
    Add LSM330 SPI and ADXL372 drivers along with the cluster driver infrastructure.

fix warnings found in stm32f334-disco/buckboost configuration

Approved-by: Gregory Nutt <gnutt@nuttx.org>

drivers/bluetooth:  Extend device simulation.  Now makes it all the way through initialization without error.  wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.

Bluetooth:  Better integrate NuttX Bluetooth IOCTL commands and NetBSD IOCTL commands.  Stanardize naming.

net/bluetooth:  Since the max header is always reported, the max frame size for purposes of allocation is the max header lenght plus the max payload, even though the frames with the max payload never have the max header length.

Merged in juniskane/nuttx-2/juniskane/ds28e17h-edited-online-with-bitbucket-1522930125320 (pull request #624)

ds28e17.h edited online with Bitbucket

Approved-by: Gregory Nutt <gnutt@nuttx.org>

STM32 F3:  Fix a couple of new warnings noted in build testing.  There are more new warnings, but I think these may be due to improper default values for some configuration settings.  I have not looked into this in detail.

arch/arm/src/stm32 and stm32l4:  In 1wire driver, do not write useless WRITEBIT zero return value to const buffer

fix w25_cacheflush sector bug.

Approved-by: Gregory Nutt <gnutt@nuttx.org>

stm32/Kconfig: add some comments to HRTIM configuration, add ADC injected channels configuration; stm32f33xxx_hrtim.h: add some comments; stm32f334-disco: add buck/boost converter example configuration

Approved-by: Gregory Nutt <gnutt@nuttx.org>

Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    Some cosmetic changes from coding style review.
Author: Juha Niskanen <juha.niskanen@haltian.com>
    drivers/1wire: add 1-wire subsystem and ds28e17 driver

This commit removes all support and all references to the Spark board and to the CC3000 wireless part.

Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    Fix a few remaining refereces to cc3000.

Author: Alan Carvalho de Assis <acassis@gmail.com>
    drivers/wireless/cc3000: emove the driver to support CC3000 because it doesn't use the USRSOCKET

Author: Alan Carvalho de Assis <acassis@gmail.com>
    configs:  Remove board support to CC3000 from all relevant configurations.

Author: Gregory Nutt <gnutt@nuttx.org>
    configs/spark:  Removes Spark board configuration.  Still available in the Obsoleted repository.  This is preparation for removal of CC3000 support by Alan Carvalho de Assis.  If there is no CC3000 support, then there is no purpose in supporting the Spark either.

Change all Sony related copyright to conform with our company's internal rules.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>

wireless/bluetooth: With change the test with the simulated bluetooth driver can get all the way up the point where it determines that the attached controller is not LE capable.  I am not sure how much first to take the simulation.  The time would probably be better invested in bringing up real hardware.

wireless/bluetooth:  A few trivial fixes from initial testing with the simulator.  The simulated Bluetooth device is probably going to be in adequate for any level of testing.

drivers/wireless/bluetooth:  Add a NULL device to support some very low level testing on the Simulator.

include/nuttx/wireless and wireless/bluetooth:  Add support for an IOCTL command to enable Bluetooth security.

include/nuttx/wireless:  Remove const from some members of IOCTL structures.  The const makes it awkward to initialize the structure.

include/nuttx/wireless:  All Bluetooth IOCTL command data must begin with the interface name string.

wireless/bluetooth:  Completes basic Rx/Tx data paths.  Still missing:  device address discovery and pairing logic.

arch/arm/src/tiva: Fix compilation errors on Tiva ADC code when ADC is enable.  Please several cosmetic changes to files made during code review.