Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
/*******************************************************************************
* arch/arm/src/lpc214x/lpc214x_usbdev.c
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*******************************************************************************/
/*******************************************************************************
* Included Files
*******************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/usb.h>
#include <nuttx/usbdev.h>
#include <nuttx/usbdev_trace.h>
#include <arch/irq.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "lpc214x_usbdev.h"
#include "lpc214x_power.h"
/*******************************************************************************
* Definitions
*******************************************************************************/
/* Configuration ***************************************************************/
#ifndef CONFIG_USBDEV_EP0_MAXSIZE
# define CONFIG_USBDEV_EP0_MAXSIZE 64
#endif
#ifndef CONFIG_USBDEV_MAXPOWER
# define CONFIG_USBDEV_MAXPOWER 100 /* mA */
#endif
#define USB_SLOW_INT USBDEV_DEVINT_EPSLOW
#define USB_DEVSTATUS_INT USBDEV_DEVINT_DEVSTAT
#ifdef CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT
# define USB_FAST_INT USBDEV_DEVINT_EPFAST
#else
# define USB_FAST_INT 0
#endif
/* Extremely detailed register debug that you would normally never want
* enabled.
*/
#undef CONFIG_LPC214X_USBDEV_REGDEBUG
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
/* Enable reading SOF from interrupt handler vs. simply reading on demand. Probably
* a bad idea... Unless there is some issue with sampling the SOF from hardware
* asynchronously.
*/
#ifdef CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
# define USB_FRAME_INT USBDEV_DEVINT_FRAME
#else
# define USB_FRAME_INT 0
#endif
#ifdef CONFIG_DEBUG
# define USB_ERROR_INT USBDEV_DEVINT_EPRINT
#else
# define USB_ERROR_INT 0
#endif
/* Number of DMA descriptors */
#ifdef CONFIG_LPC214X_USBDEV_DMA
# error DMA SUPPORT NOT YET FULLY IMPLEMENTED
# ifndef CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS
# define CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS 8
# elif CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS > 30
# define CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS 30
# endif
#endif
/* Debug ***********************************************************************/
/* Trace error codes */
#define LPC214X_TRACEERR_ALLOCFAIL 0x0001
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
#define LPC214X_TRACEERR_BADCLEARFEATURE 0x0002
#define LPC214X_TRACEERR_BADDEVGETSTATUS 0x0003
#define LPC214X_TRACEERR_BADEPNO 0x0004
#define LPC214X_TRACEERR_BADEPGETSTATUS 0x0005
#define LPC214X_TRACEERR_BADEPTYPE 0x0006
#define LPC214X_TRACEERR_BADGETCONFIG 0x0007
#define LPC214X_TRACEERR_BADGETSETDESC 0x0008
#define LPC214X_TRACEERR_BADGETSTATUS 0x0009
#define LPC214X_TRACEERR_BADREQUEST 0x000a
#define LPC214X_TRACEERR_BADSETADDRESS 0x000b
#define LPC214X_TRACEERR_BADSETCONFIG 0x000c
#define LPC214X_TRACEERR_BADSETFEATURE 0x000d
#define LPC214X_TRACEERR_BINDFAILED 0x000e
#define LPC214X_TRACEERR_DMABUSY 0x000f
#define LPC214X_TRACEERR_DRIVER 0x0010
#define LPC214X_TRACEERR_DRIVERREGISTERED 0x0011
#define LPC214X_TRACEERR_EPREAD 0x0012
#define LPC214X_TRACEERR_INVALIDCMD 0x0013
#define LPC214X_TRACEERR_INVALIDCTRLREQ 0x0014
#define LPC214X_TRACEERR_INVALIDPARMS 0x0015
#define LPC214X_TRACEERR_IRQREGISTRATION 0x0016
#define LPC214X_TRACEERR_NODMADESC 0x0017
#define LPC214X_TRACEERR_NOEP 0x0018
#define LPC214X_TRACEERR_NOTCONFIGURED 0x0019
#define LPC214X_TRACEERR_NULLPACKET 0x001a
#define LPC214X_TRACEERR_NULLREQUEST 0x001b
#define LPC214X_TRACEERR_STALLED 0x001c
/* Trace interrupt codes */
#define LPC214X_TRACEINTID_USB 0x0001
#define LPC214X_TRACEINTID_CLEARFEATURE 0x0002
#define LPC214X_TRACEINTID_CONNECTCHG 0x0003
#define LPC214X_TRACEINTID_CONNECTED 0x0004
#define LPC214X_TRACEINTID_DEVGETSTATUS 0x0005
#define LPC214X_TRACEINTID_DEVRESET 0x0006
#define LPC214X_TRACEINTID_DEVSTAT 0x0007
#define LPC214X_TRACEINTID_DISCONNECTED 0x0008
#define LPC214X_TRACEINTID_DISPATCH 0x0009
#define LPC214X_TRACEINTID_EP0IN 0x000a
#define LPC214X_TRACEINTID_EP0OUT 0x000b
#define LPC214X_TRACEINTID_EP0SETUP 0x000c
#define LPC214X_TRACEINTID_EPDMA 0x000d
#define LPC214X_TRACEINTID_EPFAST 0x000e
#define LPC214X_TRACEINTID_EPGETSTATUS 0x000f
#define LPC214X_TRACEINTID_EPIN 0x0010
#define LPC214X_TRACEINTID_EPOUT 0x0011
#define LPC214X_TRACEINTID_EPRINT 0x0012
#define LPC214X_TRACEINTID_EPSLOW 0x0013
#define LPC214X_TRACEINTID_FRAME 0x0014
#define LPC214X_TRACEINTID_GETCONFIG 0x0015
#define LPC214X_TRACEINTID_GETSETDESC 0x0016
#define LPC214X_TRACEINTID_GETSETIF 0x0017
#define LPC214X_TRACEINTID_GETSTATUS 0x0018
#define LPC214X_TRACEINTID_IFGETSTATUS 0x0019
#define LPC214X_TRACEERR_REQABORTED 0x001a
#define LPC214X_TRACEINTID_SETADDRESS 0x001b
#define LPC214X_TRACEINTID_SETCONFIG 0x001c
#define LPC214X_TRACEINTID_SETFEATURE 0x001d
#define LPC214X_TRACEINTID_SUSPENDCHG 0x001e
#define LPC214X_TRACEINTID_SYNCHFRAME 0x001f
/* Hardware interface **********************************************************/
/* Macros for testing the device status response */
#define DEVSTATUS_CONNECT(s) (((s)&USBDEV_DEVSTATUS_CONNECT)!=0)
#define DEVSTATUS_CONNCHG(s) (((s)&USBDEV_DEVSTATUS_CONNCHG)!=0)
#define DEVSTATUS_SUSPEND(s) (((s)&USBDEV_DEVSTATUS_SUSPEND)!=0)
#define DEVSTATUS_SUSPCHG(s) (((s)&USBDEV_DEVSTATUS_SUSPCHG)!=0)
#define DEVSTATUS_RESET(s) (((s)&USBDEV_DEVSTATUS_RESET)!=0)
/* If this bit is set in the lpc214x_epread response, it means that the
* recevied packet was overwritten by a later setup packet (ep0 only).
*/
#define LPC214X_READOVERRUN_BIT (0x80000000)
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
#define LPC214X_READOVERRUN(s) (((s) & LPC214X_READOVERRUN_BIT) != 0)
/* USB RAM ********************************************************************
*
* UBS_UDCA is is list of 32 pointers to DMA desciptors located at the
* beginning of USB RAM. Each pointer points to a DMA descriptor with
* assocated DMA buffer.
*/
#define USB_UDCA (uint32*)LPC214X_USBDEV_RAMBASE)
#define USB_USCASIZE (LPC214X_NPHYSENDPOINTS*sizeof(uint32))
/* Each descriptor must be aligned to a 128 address boundary */
#define USB_DDALIGNDOWN(a) ((a)&~0x7f)
#define USB_DDALIGNUP(a) USB_DDALIGNDOWN((a)+0x7f)
#define USB_DDSIZE USB_DDALIGNDOWN((LPC214X_USBDEV_RAMSIZE-USB_USCASIZE)/CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS)
#define USB_DDESC ((struct lpc214x_dmadesc_s*)(LPC214X_USBDEV_RAMBASE+USB_USCASIZE))
#ifdef CONFIG_USBDEV_ISOCHRONOUS
# define USB_DDESCSIZE (5*sizeof(uint32))
#else
# define USB_DDESCSIZE (4*sizeof(uint32))
#endif
/* Endpoints ******************************************************************/
/* Number of endpoints */
#define LPC214X_NLOGENDPOINTS (16) /* ep0-15 */
#define LPC214X_NPHYSENDPOINTS (32) /* x2 for IN and OUT */
/* Odd physical endpoint numbers are IN; even are out */
#define LPC214X_EPPHYIN(epphy) (((epphy)&1)!=0)
#define LPC214X_EPPHYOUT(epphy) (((epphy)&1)==0)
/* Mapping to more traditional endpoint numbers */
#define LPC214X_EP_LOG2PHYOUT(ep) ((ep)&0x0f)<<1))
#define LPC214X_EP_LOG2PHYIN(ep) (LPC214X_EP_OUT(ep)|0x01)
#define LPC214X_EP_LOG2PHY(ep) ((((ep)&0x0f)<<1)|(((ep)&0x80)>>7))
/* Each endpoint has somewhat different characteristics */
#define LPC214X_EPALLSET (0xffffffff) /* All endpoints */
#define LPC214X_EPOUTSET (0x55555555) /* Even phy endpoint numbers are OUT EPs */
#define LPC214X_EPINSET (0xaaaaaaaa) /* Odd endpoint numbers are IN EPs */
#define LPC214X_EPCTRLSET (0x00000003) /* EP0 IN/OUT are control endpoints */
#define LPC214X_EPINTRSET (0x0c30c30c) /* Interrupt endpoints */
#define LPC214X_EPBULKSET (0xf0c30c30) /* Bulk endpoints */
#define LPC214X_EPISOCSET (0x030c30c0) /* Isochronous endpoints */
#define LPC214X_EPDBLBUFFER (0xf3cf3cf0) /* Double buffered endpoints */
#define LPC214X_EP0MAXPACKET (64) /* EP0 max packet size (1-64) */
#define LPC214X_BULKMAXPACKET (64) /* Bulk endpoint max packet (8/16/32/64) */
#define LPC214X_INTRMAXPACKET (64) /* Interrupt endpoint max packet (1 to 64) */
#define LPC214X_ISOCMAXPACKET (512) /* Acutally 1..1023 */
/* EP0 status */
#define LPC214X_EP0IDLE (0) /* Nothing in progress */
#define LPC214X_EP0STATUSIN (1) /* Status sent */
#define LPC214X_EP0STATUSOUT (2) /* Status received */
#define LPC214X_EP0SHORTWRITE (3) /* Short data sent with no request */
#define LPC214X_EP0SHORTWRSENT (4) /* Short data write complete */
#define LPC214X_EP0SETADDRESS (5) /* Set address received */
/* Request queue operations ****************************************************/
#define lpc214x_rqempty(ep) ((ep)->head == NULL)
#define lpc214x_rqpeek(ep) ((ep)->head)
/*******************************************************************************
* Private Types
*******************************************************************************/
/* A container for a request so that the request make be retained in a list */
struct lpc214x_req_s
{
struct usbdev_req_s req; /* Standard USB request */
struct lpc214x_req_s *flink; /* Supports a singly linked list */
};
/* This is the internal representation of an endpoint */
struct lpc214x_ep_s
{
/* Common endpoint fields. This must be the first thing defined in the
* structure so that it is possible to simply cast from struct usbdev_ep_s
* to struct lpc214x_ep_s.
*/
struct usbdev_ep_s ep; /* Standard endpoint structure */
/* LPC214X-specific fields */
struct lpc214x_usbdev_s *dev; /* Reference to private driver data */
struct lpc214x_req_s *head; /* Request list for this endpoint */
struct lpc214x_req_s *tail;
ubyte eplog; /* Logical EP address from descriptor */
ubyte epphy; /* Physical EP address */
ubyte stalled:1; /* Endpoint is halted */
ubyte halted:1; /* Endpoint feature halted */
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
};
/* This represents a DMA descriptor */
#ifdef CONFIG_LPC214X_USBDEV_DMA
struct lpc214x_dmadesc_s
{
uint32 nextdesc; /* Address of the next DMA descripto in RAM */
uint32 config; /* Misc. bit encoded configuration information */
uint32 start; /* DMA start address */
uint32 status; /* Misc. bit encoded status inforamation */
#ifdef CONFIG_USBDEV_ISOCHRONOUS
uint32 size; /* Isochronous packet size address */
#endif
ubyte buffer[USB_DDSIZE-USB_DDESCSIZE];
};
#endif
/* This structure retains the state of the USB device controller */
struct lpc214x_usbdev_s
{
/* Common device fields. This must be the first thing defined in the
* structure so that it is possible to simply cast from struct usbdev_s
* to structlpc214x_usbdev_s.
*/
struct usbdev_s usbdev;
/* The bound device class driver */
struct usbdevclass_driver_s *driver;
/* LPC214X-specific fields */
ubyte devstatus; /* Last response to device status command */
ubyte ep0state; /* State of certain EP0 operations */
ubyte stalled:1; /* 1: Protocol stalled */
ubyte selfpowered:1; /* 1: Device is self powered */
ubyte paddrset:1; /* 1: Peripheral addr has been set */
ubyte attached:1; /* 1: Host attached */
ubyte rxpending:1; /* 1: RX pending */
uint32 epavail; /* Available endpoints */
uint32 softprio; /* Bitset of high priority interrupts */
uint32 wravail; /* Bitset of available endpoints */
#ifdef CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
uint32 sof; /* Last start-of-frame */
#endif
/* Allocated DMA descriptor */
#ifdef CONFIG_LPC214X_USBDEV_DMA
struct lpc214x_dmadesc_s *dmadesc;
#endif
/* The endpoint list */
struct lpc214x_ep_s eplist[LPC214X_NPHYSENDPOINTS];
};
/*******************************************************************************
* Private Function Prototypes
*******************************************************************************/
/* Register operations ********************************************************/
#if defined(CONFIG_LPC214X_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32 lpc214x_getreg(uint32 addr);
static void lpc214x_putreg(uint32 val, uint32 addr);
#else
# define lpc214x_getreg(addr) getreg32(addr)
# define lpc214x_putreg(val,addr) putreg32(val,addr)
#endif
/* Command operations **********************************************************/
static uint32 lpc214x_usbcmd(uint16 cmd, ubyte data);
/* Request queue operations ****************************************************/
static FAR struct lpc214x_req_s *lpc214x_rqdequeue(FAR struct lpc214x_ep_s *privep);
static void lpc214x_rqenqueue(FAR struct lpc214x_ep_s *privep,
FAR struct lpc214x_req_s *req);
/* Low level data transfers and request operations *****************************/
static void lpc214x_epwrite(ubyte epphy, const ubyte *data, uint32 nbytes);
static int lpc214x_epread(ubyte epphy, ubyte *data, uint32 nbytes);
static inline void lpc214x_abortrequest(struct lpc214x_ep_s *privep,
struct lpc214x_req_s *privreq, sint16 result);
static void lpc214x_reqcomplete(struct lpc214x_ep_s *privep, sint16 result);
static int lpc214x_wrrequest(struct lpc214x_ep_s *privep);
static int lpc214x_rdrequest(struct lpc214x_ep_s *privep);
static void lpc214x_cancelrequests(struct lpc214x_ep_s *privep);
/* Interrupt handling **********************************************************/
static void lpc214x_eprealize(struct lpc214x_ep_s *privep, boolean prio,
uint32 packetsize);
static ubyte lpc214x_epclrinterrupt(ubyte epphy);
static inline void lpc214x_ep0configure(struct lpc214x_usbdev_s *priv);
#ifdef CONFIG_LPC214X_USBDEV_DMA
static inline void lpc214x_dmareset(uint32 enable);
#endif
static void lpc214x_usbreset(struct lpc214x_usbdev_s *priv);
static void lpc214x_dispatchrequest(struct lpc214x_usbdev_s *priv,
static inline void lpc214x_ep0setup(struct lpc214x_usbdev_s *priv);
static inline void lpc214x_ep0dataoutinterrupt(struct lpc214x_usbdev_s *priv);
static inline void lpc214x_ep0dataininterrupt(struct lpc214x_usbdev_s *priv);
static int lpc214x_usbinterrupt(int irq, FAR void *context);
#ifdef CONFIG_LPC214X_USBDEV_DMA
static int lpc214x_dmasetup(struct lpc214x_usbdev_s *priv, ubyte epphy,
uint32 epmaxsize, uint32 nbytes, uint32 *isocpacket,
boolean isochronous);
static void lpc214x_dmarestart(ubyte epphy, uint32 descndx);
static void lpc214x_dmadisable(ubyte epphy);
#endif /* CONFIG_LPC214X_USBDEV_DMA */
/* Endpoint operations *********************************************************/
static int lpc214x_epconfigure(FAR struct usbdev_ep_s *ep,
const struct usb_epdesc_s *desc);
static int lpc214x_epdisable(FAR struct usbdev_ep_s *ep);
static FAR struct usbdev_req_s *lpc214x_epallocreq(FAR struct usbdev_ep_s *ep);
static void lpc214x_epfreereq(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *);
#ifdef CONFIG_LPC214X_USBDEV_DMA
static FAR void *lpc214x_epallocbuffer(FAR struct usbdev_ep_s *ep,
uint16 nbytes);
static void lpc214x_epfreebuffer(FAR struct usbdev_ep_s *ep, void *buf);
#endif
static int lpc214x_epsubmit(FAR struct usbdev_ep_s *ep,
struct usbdev_req_s *req);
static int lpc214x_epcancel(FAR struct usbdev_ep_s *ep,
struct usbdev_req_s *req);
static int lpc214x_epstall(FAR struct usbdev_ep_s *ep, boolean resume);
/* USB device controller operations ********************************************/
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
static FAR struct usbdev_ep_s *lcp214x_allocep(FAR struct usbdev_s *dev,
ubyte epno, boolean in, ubyte eptype);
static void lpc214x_freeep(FAR struct usbdev_s *dev, FAR struct usbdev_ep_s *ep);
static int lpc214x_getframe(struct usbdev_s *dev);
static int lpc214x_wakeup(struct usbdev_s *dev);
static int lpc214x_selfpowered(struct usbdev_s *dev, boolean selfpowered);
static int lpc214x_pullup(struct usbdev_s *dev, boolean enable);
/*******************************************************************************
* Private Data
*******************************************************************************/
/* Since there is only a single USB interface, all status information can be
* be simply retained in a single global instance.
*/
static struct lpc214x_usbdev_s g_usbdev;
static const struct usbdev_epops_s g_epops =
{
.configure = lpc214x_epconfigure,
.disable = lpc214x_epdisable,
.allocreq = lpc214x_epallocreq,
.freereq = lpc214x_epfreereq,
#ifdef CONFIG_LPC214X_USBDEV_DMA
.allocbuffer = lpc214x_epallocbuffer,
.freebuffer = lpc214x_epfreebuffer,
#endif
.submit = lpc214x_epsubmit,
.cancel = lpc214x_epcancel,
.stall = lpc214x_epstall,
};
static const struct usbdev_ops_s g_devops =
{
.allocep = lcp214x_allocep,
.freeep = lpc214x_freeep,
.getframe = lpc214x_getframe,
.wakeup = lpc214x_wakeup,
.selfpowered = lpc214x_selfpowered,
.pullup = lpc214x_pullup,
};
/*******************************************************************************
* Public Data
*******************************************************************************/
/*******************************************************************************
* Private Functions
*******************************************************************************/
/*******************************************************************************
* Name: lpc214x_getreg
*
* Description:
* Get the contents of an LPC214x register
*
*******************************************************************************/
#if defined(CONFIG_LPC214X_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32 lpc214x_getreg(uint32 addr)
{
static uint32 prevaddr = 0;
static uint32 preval = 0;
static uint32 count = 0;
/* Read the value from the register */
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
/* Is this the same value that we read from the same registe last time? Are
* we polling the register? If so, suppress some of the output.
*/
if (addr == prevaddr || val == preval)
{
if (count == 0xffffffff || ++count > 3)
{
if (count == 4)
{
lldbg("...\n");
}
return val;
}
}
/* No this is a new address or value */
else
{
/* Did we print "..." for the previous value? */
if (count > 3)
{
/* Yes.. then show how many times the value repeated */
lldbg("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
prevaddr = addr;
preval = val;
count = 1;
}
/* Show the register value read */
lldbg("%08x->%08x\n", addr, val);
return val;
}
#endif
/*******************************************************************************
* Name: lpc214x_putreg
*
* Description:
* Set the contents of an LPC214x register to a value
*
*******************************************************************************/
#if defined(CONFIG_LPC214X_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static void lpc214x_putreg(uint32 val, uint32 addr)
{
/* Show the register value being written */
lldbg("%08x<-%08x\n", addr, val);
/* Write the value */
putreg32(val, addr);
}
#endif
/*******************************************************************************
* Name: lpc214x_usbcmd
*
* Description:
* Transmit commands to the USB engine
*
*******************************************************************************/
static uint32 lpc214x_usbcmd(uint16 cmd, ubyte data)
{
irqstate_t flags;
uint32 tmp = 0;
/* Disable interrupt and clear CDFULL and CCEMPTY interrupt status */
flags = irqsave();
lpc214x_putreg(USBDEV_DEVINT_CDFULL|USBDEV_DEVINT_CCEMTY, LPC214X_USBDEV_DEVINTCLR);
/* Load command + WR in command code register */
lpc214x_putreg(((cmd & 0xff) << 16) + CMD_USB_CMDWR, LPC214X_USBDEV_CMDCODE);
/* Wait until the command register is empty (CCEMPTY != 0, command is accepted) */
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CCEMTY) == 0);
/* Clear command register empty (CCEMPTY) interrupt */
lpc214x_putreg(USBDEV_DEVINT_CCEMTY, LPC214X_USBDEV_DEVINTCLR);
case CMD_USB_DEV_SETADDRESS:
case CMD_USB_DEV_CONFIG:
case CMD_USB_DEV_SETMODE:
case CMD_USB_DEV_SETSTATUS:
{
/* Send data + WR and wait for CCEMPTY */
lpc214x_putreg((data << 16) + CMD_USB_DATAWR, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CCEMTY) == 0);
}
case CMD_USB_DEV_READFRAMENO:
case CMD_USB_DEV_READTESTREG:
{
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Clear CDFULL and read LS data */
lpc214x_putreg(USBDEV_DEVINT_CDFULL, LPC214X_USBDEV_DEVINTCLR);
tmp = lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Read MS data */
tmp |= lpc214x_getreg(LPC214X_USBDEV_CMDDATA) << 8;
}
case CMD_USB_DEV_GETSTATUS:
case CMD_USB_DEV_GETERRORCODE:
case CMD_USB_DEV_READERRORSTATUS:
case CMD_USB_EP_CLRBUFFER:
{
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Read data */
tmp = lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
}
/* No data transfer */
case CMD_USB_EP_VALIDATEBUFFER:
break;
default:
switch (cmd & 0x1e0)
{
case CMD_USB_EP_SELECT:
case CMD_USB_EP_SELECTCLEAR:
{
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Read data */
tmp = lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
}
break;
case CMD_USB_EP_SETSTATUS:
{
/* Send data + RD and wait for CCEMPTY */
lpc214x_putreg((data << 16) + CMD_USB_DATAWR, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CCEMTY) == 0);
}
break;
default:
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_INVALIDCMD), 0);
break;
}
break;
}
/* Restore the interrupt flags */
irqrestore(flags);
return tmp;
}
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
/*******************************************************************************
* Name: lpc214x_rqdequeue
*
* Description:
* Remove a request from an endpoint request queue
*
*******************************************************************************/
static FAR struct lpc214x_req_s *lpc214x_rqdequeue(FAR struct lpc214x_ep_s *privep)
{
FAR struct lpc214x_req_s *ret = privep->head;
if (ret)
{
privep->head = ret->flink;
if (!privep->head)
{
privep->tail = NULL;
}
ret->flink = NULL;
}
return ret;
}
/*******************************************************************************
* Name: lpc214x_rqenqueue
*
* Description:
* Add a request from an endpoint request queue
*
*******************************************************************************/
static void lpc214x_rqenqueue(FAR struct lpc214x_ep_s *privep,
FAR struct lpc214x_req_s *req)
{
req->flink = NULL;
if (!privep->head)
{
privep->head = req;
privep->tail = req;
}
else
{
privep->tail->flink = req;
privep->tail = req;
}
}
/*******************************************************************************
* Name: lpc214x_epwrite
*
* Description:
* Endpoint write (IN)
*
*******************************************************************************/
static void lpc214x_epwrite(ubyte epphy, const ubyte *data, uint32 nbytes)
{
uint32 value;
boolean aligned = (((uint32)data & 3) == 0);
/* Set the write enable bit for this physical EP address */
lpc214x_putreg(((epphy << 1) & LPC214X_USBCTRL_EPMASK) | LPC214X_USBCTRL_WREN,
LPC214X_USBDEV_CTRL);
/* Set the transmit packet length (nbytes must be less than 2048) */
/* Transfer the packet data */
do
{
/* Zero length packets are a special case */
if (nbytes)
{
if (aligned)
{
value = *(uint32*)data;
}
else
{
value = (uint32)data[0] | ((uint32)data[1] << 8) |
((uint32)data[2] << 16) | ((uint32)data[3] << 24);
}
lpc214x_putreg(value, LPC214X_USBDEV_TXDATA);
data += 4;
}
else
{
/* Zero length packet */
lpc214x_putreg(0, LPC214X_USBDEV_TXDATA);
while ((lpc214x_getreg(LPC214X_USBDEV_CTRL) & LPC214X_USBCTRL_WREN) != 0);
(void)lpc214x_usbcmd(CMD_USB_EP_SELECT | epphy, 0);
(void)lpc214x_usbcmd(CMD_USB_EP_VALIDATEBUFFER, 0);
}
/*******************************************************************************
* Name: lpc214x_epread
*
* Description:
* Endpoint read (OUT)
*
*******************************************************************************/
static int lpc214x_epread(ubyte epphy, ubyte *data, uint32 nbytes)
{
uint32 pktlen;
uint32 result;
uint32 value;
ubyte aligned = 0;
/* If data is NULL, then we are being asked to read but discard the data.
* For most cases, the resulting buffer will be aligned and we will be
* able to do faster 32-bit transfers.
*/
if (data)
{
if (((uint32)data & 3) == 0)
{
aligned = 1;
}
else
{
aligned = 2;
}
}
/* Set the read enable bit for this physical EP address */
lpc214x_putreg(((epphy << 1) & LPC214X_USBCTRL_EPMASK) | LPC214X_USBCTRL_RDEN,
LPC214X_USBDEV_CTRL);
/* Wait for packet buffer ready for reading */
while ((lpc214x_getreg(LPC214X_USBDEV_RXPLEN) & USBDEV_RXPLEN_PKTRDY) == 0);
pktlen = lpc214x_getreg(LPC214X_USBDEV_RXPLEN) & USBDEV_RXPLEN_PKTLENGTH;
/* Read data from input buffer while read data is valid (DV) */
while ((lpc214x_getreg(LPC214X_USBDEV_RXPLEN) & USBDEV_RXPLEN_DV) != 0)
value = lpc214x_getreg(LPC214X_USBDEV_RXDATA);
if (aligned == 1)
{
*(uint32*)data = value;
data += 4;
}
else if (aligned == 2)
*data++ = (ubyte)value;
*data++ = (ubyte)(value >> 8);
*data++ = (ubyte)(value >> 16);
*data++ = (ubyte)(value >> 24);
}
}
/* Done */
(void)lpc214x_usbcmd(CMD_USB_EP_SELECT | epphy, 0);
result = lpc214x_usbcmd(CMD_USB_EP_CLRBUFFER, 0);
/* The packet overrun bit in the clear buffer response is applicable only
* on EP0 transfers. If set it means that the recevied packet was overwritten
* by a later setup packet.
*/
if (epphy == LPC214X_EP0_OUT && (result & CMD_USB_CLRBUFFER_PO) != 0)
{
/* Pass this information in bit 31 */
pktlen |= LPC214X_READOVERRUN_BIT;
}
return pktlen;
}
/*******************************************************************************
* Name: lpc214x_abortrequest
*
* Description:
* Discard a request
*
*******************************************************************************/
static inline void lpc214x_abortrequest(struct lpc214x_ep_s *privep,
struct lpc214x_req_s *privreq,
sint16 result)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_REQABORTED), (uint16)privep->epphy);
/* Save the result in the request structure */
privreq->req.result = result;
/* Callback to the request completion handler */
privreq->req.callback(&privep->ep, &privreq->req);
}
/*******************************************************************************
* Name: lpc214x_reqcomplete
*
* Description:
* Handle termination of the request at the head of the endpoint request queue.
*
*******************************************************************************/
static void lpc214x_reqcomplete(struct lpc214x_ep_s *privep, sint16 result)
{
struct lpc214x_req_s *privreq;
int stalled = privep->stalled;
irqstate_t flags;
/* Remove the complete request at the head of the endpoint request list */
flags = irqsave();
irqrestore(flags);
if (privreq)
{
/* If endpoint 0, temporarily reflect the state of protocol stalled
* in the callback.
*/
privep->stalled = privep->dev->stalled;
}
/* Save the result in the request structure */
privreq->req.result = result;
/* Callback to the request completion handler */
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
privreq->req.callback(&privep->ep, &privreq->req);
/* Restore the stalled indication */
privep->stalled = stalled;
}
}
/*******************************************************************************
* Name: lpc214x_wrrequest
*
* Description:
* Send from the next queued write request
*
* Returned Value:
* 0:not finished; 1:completed; <0:error
*
*******************************************************************************/
static int lpc214x_wrrequest(struct lpc214x_ep_s *privep)
{
struct lpc214x_req_s *privreq;
ubyte *buf;
int nbytes;
int bytesleft;
/* Check the request from the head of the endpoint request queue */
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_NULLREQUEST), 0);
/* Ignore any attempt to send a zero length packet */
if (privreq->req.len == 0)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_NULLPACKET), 0);
lpc214x_reqcomplete(privep, OK);
return OK;
}
/* Otherwise send the data in the packet (in the DMA on case, we
* may be resuming transfer already in progress.
*/
/* Get the number of bytes left to be sent in the packet */
bytesleft = privreq->req.len - privreq->req.xfrd;
/* Send the next packet if (1) there are more bytes to be sent, or
* (2) the last packet sent was exactly maxpacketsize (bytesleft == 0)
*/
usbtrace(TRACE_WRITE(privep->epphy), privreq->req.xfrd);
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
{
/* Try to send maxpacketsize -- unless we don't have that many
* bytes to send.
*/
nbytes = privep->ep.maxpacket;
if (nbytes > bytesleft)
{
nbytes = bytesleft;
}
/* Send the largest number of bytes that we can in this packet */
buf = privreq->req.buf + privreq->req.xfrd;
lpc214x_epwrite(privep->epphy, buf, nbytes);
/* Update for the next time through the loop */
privreq->req.xfrd += nbytes;
}
/* If all of the bytes were sent (including any final null packet)
* then we are finished with the transfer
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
{
usbtrace(TRACE_COMPLETE(privep->epphy), privreq->req.xfrd);
lpc214x_reqcomplete(privep, OK);
return OK;
}
}
return OK; /* Won't get here */
}
/*******************************************************************************
* Name: lpc214x_rdrequest
*
* Description:
* Receive to the next queued read request
*
*******************************************************************************/
static int lpc214x_rdrequest(struct lpc214x_ep_s *privep)
{
struct lpc214x_req_s *privreq;
ubyte *buf;
int nbytesread;
/* Check the request from the head of the endpoint request queue */
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_NULLREQUEST), 0);
/* Ignore any attempt to receive a zero length packet */
if (privreq->req.len == 0)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_NULLPACKET), 0);
lpc214x_reqcomplete(privep, OK);
return OK;
}
usbtrace(TRACE_READ(privep->epphy), privreq->req.xfrd);
for (;;)
{
/* Receive the next packet if (1) there are more bytes to be receive, or
* (2) the last packet was exactly maxpacketsize.
*/
buf = privreq->req.buf + privreq->req.xfrd;
nbytesread = lpc214x_epread(privep->epphy, buf, privep->ep.maxpacket);
if (nbytesread < 0)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EPREAD), nbytesread);
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
return ERROR;
}
/* If the receive buffer is full or if the last packet was not full
* then we are finished with the transfer.
*/
privreq->req.xfrd += nbytesread;
if (privreq->req.len < privreq->req.xfrd || nbytesread < privep->ep.maxpacket)
{
usbtrace(TRACE_COMPLETE(privep->epphy), privreq->req.xfrd);
lpc214x_reqcomplete(privep, OK);
return OK;
}
}
return OK; /* Won't get here */
}
/*******************************************************************************
* Name: lpc214x_cancelrequests
*
* Description:
* Cancel all pending requests for an endpoint
*
*******************************************************************************/
static void lpc214x_cancelrequests(struct lpc214x_ep_s *privep)
{
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
lpc214x_reqcomplete(privep, -ESHUTDOWN);
}
}
/*******************************************************************************
* Name: lpc214x_eprealize
*
* Description:
* Enable or disable an endpoint
*
*******************************************************************************/
static void lpc214x_eprealize(struct lpc214x_ep_s *privep, boolean prio, uint32 packetsize)
{
struct lpc214x_usbdev_s *priv = privep->dev;
uint32 mask;
uint32 reg;
/* Initialize endpoint software priority */
mask = 1 << privep->epphy;
if (prio)
{
priv->softprio = priv->softprio | mask;
}
else
{
priv->softprio = priv->softprio & ~mask;
}
/* Clear realize interrupt bit */
lpc214x_putreg(USBDEV_DEVINT_EPRLZED, LPC214X_USBDEV_DEVINTCLR);
/* Realize the endpoint */
reg = lpc214x_getreg(LPC214X_USBDEV_REEP);
reg |= (1 << privep->epphy);
lpc214x_putreg(reg, LPC214X_USBDEV_REEP);
/* Set endpoint maximum packet size */
lpc214x_putreg(privep->epphy, LPC214X_USBDEV_EPIND);
lpc214x_putreg(packetsize, LPC214X_USBDEV_MAXPSIZE);
/* Wait for Realize complete */
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_EPRLZED) == 0);
/* Clear realize interrupt bit */
lpc214x_putreg(USBDEV_DEVINT_EPRLZED,LPC214X_USBDEV_DEVINTCLR);
}
/*******************************************************************************
* Name: lpc214x_epclrinterrupt
*
* Description:
* Clear the EP interrupt flag and return the current EP status
*
*******************************************************************************/
static ubyte lpc214x_epclrinterrupt(ubyte epphy)
{
/* Clear the endpoint interrupt */
lpc214x_putreg(1 << epphy, LPC214X_USBDEV_EPINTCLR);
/* Wait for data in the command data register */
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Return the value of the command data register */
return lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
}
/*******************************************************************************
* Name: lpc214x_ep0configure
*
* Description:
* Configure endpoint 0
*
*******************************************************************************/
static inline void lpc214x_ep0configure(struct lpc214x_usbdev_s *priv)
{
uint32 inten;
/* EndPoint 0 initialization */
lpc214x_eprealize(&priv->eplist[LPC214X_CTRLEP_OUT], 0, CONFIG_USBDEV_EP0_MAXSIZE);
lpc214x_eprealize(&priv->eplist[LPC214X_CTRLEP_IN], 1, CONFIG_USBDEV_EP0_MAXSIZE);
/* Enable EP0 interrupts (not DMA) */
inten = lpc214x_getreg(LPC214X_USBDEV_EPINTEN);
inten |= 3; /* EP0 Rx and Tx */
lpc214x_putreg(inten, LPC214X_USBDEV_EPINTEN);
}
/*******************************************************************************
* Name: lpc214x_dmareset
*
* Description: Reset USB DMA
*
*******************************************************************************/
#ifdef CONFIG_LPC214X_USBDEV_DMA
static inline void lpc214x_dmareset(uint32 enable)
{
int i;
/* Disable All DMA interrupts */
lpc214x_putreg(0, LPC214X_USBDEV_DMAINTEN);
lpc214x_putreg(0xffffffff, LPC214X_USBDEV_EPDMADIS);
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
/* DMA Request clear */
putreq32(0xffffffff, LPC214X_USBDEV_DMARCLR);
/* End of Transfer Interrupt Clear */
putreq32(0xffffffff, LPC214X_USBDEV_EOTINTCLR);
/* New DD Request Interrupt Clear */
putreq32(0xffffffff, LPC214X_USBDEV_NDDRINTCLR);
/* System Error Interrupt Clear */
putreq32(0xffffffff, LPC214X_USBDEV_SYSERRINTCLR);
/* Nullify all pointers in the UDCA */
for (i = 0; i < LPC214X_NPHYSENDPOINTS; ++i)
{
USB_UDCA[i] = NULL;
}
/* Set USB UDCA Head register */
lpc214x_putreg((uint32)USB_UDCA, LPC214X_USBDEV_UDCAH);
/* Invalidate all DMA descriptors */
for (i = 0; i < CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS; ++i)
{
memset(&USB_DDESC[i], 0, USB_DDESCSIZE);
}
/* Enable DMA interrupts */
lpc214x_putreg(enable, LPC214X_USBDEV_DMAINTEN);
}
#endif
/*******************************************************************************
* Name: lpc214x_usbreset
*
* Description:
* Reset Usb engine
*
*******************************************************************************/
static void lpc214x_usbreset(struct lpc214x_usbdev_s *priv)
{
/* Disable all endpoint interrupts */
lpc214x_putreg(0, LPC214X_USBDEV_EPINTEN);
/* Frame is Hp interrupt */
lpc214x_putreg(1, LPC214X_USBDEV_DEVINTPRI);
/* Clear all pending interrupts */
lpc214x_putreg(0xffffffff, LPC214X_USBDEV_EPINTCLR);
lpc214x_putreg(0xffffffff, LPC214X_USBDEV_DEVINTCLR);
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
/* Periperhal address is needed */
priv->paddrset = 0;
/* Endpoints not yet configured */
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
/* EndPoint 0 initialization */
lpc214x_ep0configure(priv);
#ifdef CONFIG_LPC214X_USBDEV_DMA
/* Enable End_of_Transfer_Interrupt and System_Error_Interrupt USB DMA
* interrupts
*/
lpc214x_dmareset(CONFIG_LPC214X_USBDEV_DMAINTMASK);
#endif
/* Enable Device interrupts */
lpc214x_putreg(USB_SLOW_INT|USB_DEVSTATUS_INT|USB_FAST_INT|USB_FRAME_INT|USB_ERROR_INT,
LPC214X_USBDEV_DEVINTEN);
}
/*******************************************************************************
* Name: lpc214x_dispatchrequest
*
* Description:
* Provide unhandled setup actions to the class driver. This is logically part
* of the USB interrupt handler.
*
*******************************************************************************/
static void lpc214x_dispatchrequest(struct lpc214x_usbdev_s *priv,
{
int ret;
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DISPATCH), 0);
if (priv && priv->driver)
{
ret = CLASS_SETUP(priv->driver, &priv->usbdev, ctrl);
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
if (ret < 0)
{
/* Stall on failure */
priv->stalled = 1;
}
else
{
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
}
}
/*******************************************************************************
* Name: lpc214x_ep0setup
*
* Description:
* USB Ctrl EP Setup Event. This is logically part of the USB interrupt
* handler.
*
*******************************************************************************/
static inline void lpc214x_ep0setup(struct lpc214x_usbdev_s *priv)
{
struct lpc214x_ep_s *ep0 = &priv->eplist[LPC214X_EP0_OUT];
struct lpc214x_req_s *privreq = lpc214x_rqpeek(ep0);
uint16 index;
ubyte epphy;
ubyte response[2];
int ret;
/* Starting a control request? */
if (priv->usbdev.speed == USB_SPEED_UNKNOWN)
{
priv->usbdev.speed = USB_SPEED_FULL;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 1);
}
/* Terminate any pending requests */
{
sint16 result = OK;
if (privreq->req.xfrd != privreq->req.len)
{
result = -EPROTO;
}
usbtrace(TRACE_COMPLETE(ep0->epphy), privreq->req.xfrd);
lpc214x_reqcomplete(ep0, result);
}
/* Assume NOT stalled */
ep0->stalled = 0;
priv->stalled = 0;
/* Read EP0 data */
ret = lpc214x_epread(LPC214X_EP0_OUT, (ubyte*)&ctrl, USB_SIZEOF_CTRLREQ);
if (ret <= 0)
{
return;
}
uvdbg("type=%02x req=%02x value=%04x index=%04x len=%04x\n",
GETUINT16(ctrl.value), GETUINT16(ctrl.index), GETUINT16(ctrl.len));
/* Dispatch any non-standard requests */
if ((ctrl.type & USB_REQ_TYPE_MASK) != USB_REQ_TYPE_STANDARD)
return;
}
/* Handle standard request. Pick off the things of interest to the
* USB device controller driver; pass what is left to the class driver
*/
{
case USB_REQ_GETSTATUS:
{
/* type: device-to-host; recipient = device, interface, endpoint
* value: 0
* index: zero interface endpoint
* len: 2; data = status
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETSTATUS), 0);
if (!priv->paddrset || GETUINT16(ctrl.len) != 2 ||
(ctrl.type & USB_REQ_DIR_IN) == 0 || GETUINT16(ctrl.value) != 0)
{
priv->stalled = 1;
}
else
{
{
case USB_REQ_RECIPIENT_ENDPOINT:
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPGETSTATUS), 0);
if (epphy < LPC214X_NPHYSENDPOINTS)
{
if ((lpc214x_usbcmd(CMD_USB_EP_SELECT|epphy, 0) & CMD_USB_EPSELECT_ST) != 0)
{
response[0] = 1; /* Stalled */
}
else
{
response[0] = 0; /* Not stalled */
}
response[1] = 0;
lpc214x_epwrite(LPC214X_EP0_IN, response, 2);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADEPGETSTATUS), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_RECIPIENT_DEVICE:
{
if (index == 0)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DEVGETSTATUS), 0);
/* Features: Remote Wakeup=YES; selfpowered=? */
response[0] = (priv->selfpowered << USB_FEATURE_SELFPOWERED) |
(1 << USB_FEATURE_REMOTEWAKEUP);
response[1] = 0;
lpc214x_epwrite(LPC214X_EP0_IN, response, 2);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADDEVGETSTATUS), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_RECIPIENT_INTERFACE:
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_IFGETSTATUS), 0);
response[0] = 0;
response[1] = 0;
lpc214x_epwrite(LPC214X_EP0_IN, response, 2);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
break;
default:
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADGETSTATUS), 0);
priv->stalled = 1;
}
break;
}
}
}
break;
case USB_REQ_CLEARFEATURE:
{
/* type: host-to-device; recipient = device, interface or endpoint
* value: feature selector
* index: zero interface endpoint;
* len: zero, data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_CLEARFEATURE), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT)
else if (priv->paddrset && GETUINT16(ctrl.value) == USB_FEATURE_ENDPOINTHALT &&
GETUINT16(ctrl.index) < LPC214X_NLOGENDPOINTS && GETUINT16(ctrl.len) == 0)
ubyte epphys = LPC214X_EP_LOG2PHY(GETUINT16(ctrl.index));
priv->eplist[epphys].halted = 0;
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->ep0state = LPC214X_EP0STATUSIN;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADCLEARFEATURE), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_SETFEATURE:
{
/* type: host-to-device; recipient = device, interface, endpoint
* value: feature selector
* index: zero interface endpoint;
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SETFEATURE), 0);
if (((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE) &&
uvdbg("test mode: %d\n", GETUINT16(ctrl.index));
else if ((ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT)
else if (priv->paddrset && GETUINT16(ctrl.value) == USB_FEATURE_ENDPOINTHALT &&
GETUINT16(ctrl.index) < LPC214X_NLOGENDPOINTS && GETUINT16(ctrl.len) == 0)
ubyte epphys = LPC214X_EP_LOG2PHY(GETUINT16(ctrl.index));
priv->eplist[epphys].halted = 1;
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->ep0state = LPC214X_EP0STATUSIN;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADSETFEATURE), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_SETADDRESS:
{
/* type: host-to-device; recipient = device
* value: device address
* index: 0
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SETADDRESS), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
GETUINT16(ctrl.index) == 0 && GETUINT16(ctrl.len) == 0 &&
GETUINT16(ctrl.value) < 128)
{
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->eplist[LPC214X_EP0_OUT].eplog = ctrl.value[0];
priv->eplist[LPC214X_EP0_IN].eplog = ctrl.value[0];
priv->ep0state = LPC214X_EP0SETADDRESS;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADSETADDRESS), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_GETDESCRIPTOR:
/* type: device-to-host; recipient = device
* value: descriptor type and index
* index: 0 or language ID;
* len: descriptor len; data = descriptor
*/
/* type: host-to-device; recipient = device
* value: descriptor type and index
* index: 0 or language ID;
* len: descriptor len; data = descriptor
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETSETDESC), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE)
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADGETSETDESC), 0);
priv->stalled = 1;
}
}
break;
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
case USB_REQ_GETCONFIGURATION:
/* type: device-to-host; recipient = device
* value: 0;
* index: 0;
* len: 1; data = configuration value
*/
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETCONFIG), 0);
if (priv->paddrset && (ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
GETUINT16(ctrl.value) == 0 && GETUINT16(ctrl.index) == 0 &&
GETUINT16(ctrl.len) == 1)
{
lpc214x_dispatchrequest(priv, &ctrl);
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADGETCONFIG), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_SETCONFIGURATION:
/* type: host-to-device; recipient = device
* value: configuration value
* index: 0;
* len: 0; data = none
*/
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SETCONFIG), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
GETUINT16(ctrl.index) == 0 && GETUINT16(ctrl.len) == 0)
{
lpc214x_dispatchrequest(priv, &ctrl);
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADSETCONFIG), 0);
priv->stalled = 1;
}
}
break;
/* type: device-to-host; recipient = interface
* value: 0
* index: interface;
* len: 1; data = alt interface
*/
/* type: host-to-device; recipient = interface
* value: alternate setting
* index: interface;
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETSETIF), 0);
lpc214x_dispatchrequest(priv, &ctrl);
}
break;
case USB_REQ_SYNCHFRAME:
/* type: device-to-host; recipient = endpoint
* value: 0
* index: endpoint;
* len: 2; data = frame number
*/
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SYNCHFRAME), 0);
}
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_INVALIDCTRLREQ), 0);
priv->stalled = 1;
}
break;
}
if (priv->stalled)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_STALLED), priv->ep0state);
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
lpc214x_epstall(&ep0->ep, FALSE);
lpc214x_epstall(&ep0->ep, FALSE);
}
}
/*******************************************************************************
* Name: lpc214x_ep0dataoutinterrupt
*
* Description:
* USB Ctrl EP Data OUT Event. This is logically part of the USB interrupt
* handler.
*
*******************************************************************************/
static inline void lpc214x_ep0dataoutinterrupt(struct lpc214x_usbdev_s *priv)
{
struct lpc214x_ep_s *ep0;
uint32 pktlen;
/* Copy new setup packet int setup buffer */
switch (priv->ep0state)
{
case LPC214X_EP0SHORTWRITE:
{
priv->ep0state = LPC214X_EP0STATUSOUT;
pktlen = lpc214x_epread(LPC214X_EP0_OUT, NULL, CONFIG_USBDEV_EP0_MAXSIZE);
if (LPC214X_READOVERRUN(pktlen))
{
lpc214x_ep0setup(priv);
}
}
break;
case LPC214X_EP0SHORTWRSENT:
{
priv->ep0state = LPC214X_EP0IDLE;
pktlen = lpc214x_epread(LPC214X_EP0_OUT, NULL, CONFIG_USBDEV_EP0_MAXSIZE);
if (LPC214X_READOVERRUN(pktlen))
{
lpc214x_ep0setup(priv);
}
}
break;
case LPC214X_EP0IDLE:
{
ep0 = &priv->eplist[LPC214X_EP0_OUT];
{
lpc214x_wrrequest(ep0);
}
}
break;
default:
priv->stalled = 1;
break;
}
if (priv->stalled)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_STALLED), priv->ep0state);
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
ep0 = &priv->eplist[LPC214X_EP0_OUT];
lpc214x_epstall(&ep0->ep, FALSE);
lpc214x_epstall(&ep0->ep, FALSE);
}
return;
}
/*******************************************************************************
* Name: lpc214x_ep0dataininterrupt
*
* Description:
* USB Ctrl EP Data IN Event. This is logically part of the USB interrupt
* handler.
*
*******************************************************************************/
static inline void lpc214x_ep0dataininterrupt(struct lpc214x_usbdev_s *priv)
{
struct lpc214x_ep_s *ep0;
switch (priv->ep0state)
{
case LPC214X_EP0STATUSOUT:
case LPC214X_EP0STATUSIN:
priv->ep0state = LPC214X_EP0IDLE;
break;
case LPC214X_EP0SHORTWRITE:
priv->ep0state = LPC214X_EP0SHORTWRSENT;
break;
case LPC214X_EP0SETADDRESS:
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SETADDRESS), 0);
/* Set EP0 logical address */
ubyte eplog = priv->eplist[LPC214X_EP0_OUT].eplog;
lpc214x_usbcmd(CMD_USB_DEV_SETADDRESS, CMD_USB_SETADDRESS_DEVEN | eplog);
lpc214x_usbcmd(CMD_USB_DEV_SETADDRESS, CMD_USB_SETADDRESS_DEVEN | eplog);
/* Not yet fully configured */
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
if (eplog)
{
priv->paddrset = 1;
priv->ep0state = LPC214X_EP0IDLE;
}
}
break;
default:
priv->stalled = 1;
break;
}
if (priv->stalled)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_STALLED), priv->ep0state);
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
ep0 = &priv->eplist[LPC214X_EP0_IN];
lpc214x_epstall(&ep0->ep, FALSE);
lpc214x_epstall(&ep0->ep, FALSE);
}
}
/*******************************************************************************
* Name: lpc214x_usbinterrupt
*
* Description:
* USB interrupt handler
*
*******************************************************************************/
static int lpc214x_usbinterrupt(int irq, FAR void *context)
{
struct lpc214x_usbdev_s *priv = &g_usbdev;
struct lpc214x_ep_s *privep ;
uint32 devintstatus; /* Sampled state of the device interrupt status register */
uint32 epintstatus; /* Sampled state of the endpoint interrupt status register */
#ifdef CONFIG_LPC214X_USBDEV_DMA
uint32 dmaintstatus; /* Sampled state of dma interrupt status register */
#endif
uint32 softprio; /* Current priority interrupt bitset */
uint32 pending; /* Pending subset of priority interrupt bitset */
ubyte epphy; /* Physical endpoint number being processed */
int i;
usbtrace(TRACE_INTENTRY(LPC214X_TRACEINTID_USB), 0);
/* Read the device interrupt status register */
devintstatus = lpc214x_getreg(LPC214X_USBDEV_DEVINTST);
#ifdef CONFIG_LPC214X_USBDEV_DMA
/* Check for low priority and high priority (non-DMA) interrupts */
if ((lpc214x_getreg(LPC214X_USBDEV_INTST) & (USBDEV_INTST_REQLP|USBDEV_INTST_REQHP)) != 0)
{
#endif
#ifdef CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT
/* Fast EP interrupt */
if ((devintstatus & USBDEV_DEVINT_EPFAST) != 0)
{
/* Clear Fast EP interrupt */
lpc214x_putreg(USBDEV_DEVINT_EPFAST, LPC214X_USBDEV_DEVINTCLR);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPFAST), 0);
/* Do what? */
}
#endif
#if CONFIG_DEBUG
/* USB engine error interrupt */
if ((devintstatus & USBDEV_DEVINT_EPRINT))
{
ubyte errcode;
/* Clear the error interrupt */
lpc214x_putreg(USBDEV_DEVINT_EPRINT, LPC214X_USBDEV_DEVINTCLR);
/* And show what error occurred */
errcode = (ubyte)lpc214x_usbcmd(CMD_USB_DEV_READERRORSTATUS, 0) & 0x0f;
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPRINT), (uint16)errcode);
}
#endif
#ifdef CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
/* Frame interrupt */
if ((devintstatus & USBDEV_DEVINT_FRAME) != 0)
{
/* Clear the frame interrupt */
lpc214x_putreg(USBDEV_DEVINT_FRAME, LPC214X_USBDEV_DEVINTCLR);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_FRAME), 0);
/* Then read the start of frame value */
priv->sof = (uint16)lpc214x_usbcmd(CMD_USB_DEV_READFRAMENO, 0);
}
#endif
/* Device Status interrupt */
if ((devintstatus & USBDEV_DEVINT_DEVSTAT) != 0)
{
/* Clear Device status interrupt */
lpc214x_putreg(USBDEV_DEVINT_DEVSTAT, LPC214X_USBDEV_DEVINTCLR);
/* Get device status */
g_usbdev.devstatus = (ubyte)lpc214x_usbcmd(CMD_USB_DEV_GETSTATUS, 0);
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DEVSTAT), (uint16)g_usbdev.devstatus);
/* Device connection status */
if (DEVSTATUS_CONNCHG(g_usbdev.devstatus))
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_CONNECTCHG), 0);
if (DEVSTATUS_CONNECT(g_usbdev.devstatus))
{
/* Host is connected */
if (!priv->attached)
{
/* We have a transition from unattached to attached */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_CONNECTED), 0);
priv->usbdev.speed = USB_SPEED_UNKNOWN;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
priv->attached = 1;
}
}
/* Otherwise the host is not attached */
else if (priv->attached)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DISCONNECTED), 0);
priv->usbdev.speed = USB_SPEED_UNKNOWN;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
priv->attached = 0;
priv->paddrset = 0;
}
}
/* Device suspend status */
if (DEVSTATUS_SUSPCHG(g_usbdev.devstatus))
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SUSPENDCHG), 0);
}
/* Device reset */
if (DEVSTATUS_RESET(g_usbdev.devstatus))
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DEVRESET), 0);
lpc214x_usbreset(priv);
}
}
/* Slow EP interrupt */
if ((devintstatus & USBDEV_DEVINT_EPSLOW) != 0)
{
/* Clear Slow EP interrupt */
lpc214x_putreg(USBDEV_DEVINT_EPSLOW, LPC214X_USBDEV_DEVINTCLR);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPSLOW), 0);
do
{
/* Read the endpoint interrupt status register */
epintstatus = lpc214x_getreg(LPC214X_USBDEV_EPINTST);
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
/* Loop twice: Process software high priority interrupts
* on the first pass and low priority interrupts on the
* second.
*/
softprio = priv->softprio;
for (i = 0; i < 2; i++, softprio = ~softprio)
{
/* On the first time through the loop, pending will be
* the bitset of high priority pending interrupts; on the
* second time throught it will be the bitset of low
* priority interrupts.
*/
pending = epintstatus & softprio;
/* EP0 OUT interrupt indicated by bit0 == 1 */
if ((pending & 1) != 0)
{
/* Clear the endpoint interrupt */
uint32 result = lpc214x_epclrinterrupt(LPC214X_CTRLEP_OUT);
if (result & USBDEV_EPSETUPPACKET)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0SETUP), (uint16)result);
lpc214x_ep0setup(priv);
}
else
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0OUT), priv->ep0state);
lpc214x_ep0dataoutinterrupt(priv);
}
break;
}
/* EP0 IN interrupt indicated by bit1 == 1 */
if ((pending & 2) != 0)
{
/* Clear the endpoint interrupt */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0IN), priv->ep0state);
(void)lpc214x_epclrinterrupt(LPC214X_CTRLEP_IN);
lpc214x_ep0dataininterrupt(priv);
}
pending >>= 2;
/* All other endpoints EP 1-31 */
for (epphy = 2; pending; epphy++, pending >>= 1)
{
/* Is the endpoint interrupt pending? */
if ((pending & 1) != 0)
{
/* Yes.. clear the endpoint interrupt */
(void)lpc214x_epclrinterrupt(epphy);
/* Get the endpoint sructure corresponding to the physical
* endpoint number.
*/
privep = &priv->eplist[epphy];
/* Check for complete on IN or OUT endpoint. Odd physical
* endpoint addresses are IN endpoints.
*/
if ((epphy & 1) != 0)
{
/* IN: device-to-host */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPOUT), (uint16)epphy);
if (priv->usbdev.speed == USB_SPEED_UNKNOWN)
{
priv->usbdev.speed = USB_SPEED_FULL;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 1);
}
/* Write host data from the current write request */
{
lpc214x_wrrequest(privep);
}
}
else
{
/* OUT: host-to-device */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPIN), (uint16)epphy);
/* Read host data into the current read request */
{
lpc214x_rdrequest(privep);
}
else
{
uvdbg("Pending interrupt\n");
priv->rxpending = 1;
}
}
}
}
}
}
while (epintstatus);
}
#ifdef CONFIG_LPC214X_USBDEV_DMA
}
/* Check for DMA interrupts */
if ((lpc214x_getreg(LPC214X_USBDEV_INTST) & USBDEV_INTST_REQDMA) != 0)
{
/* First Software High priority and then low priority */
uint32 tmp;
/* Collect the DMA interrupt sources */
dmaintstatus = 0;
tmp = lpc214x_getreg(LPC214X_USBDEV_EOTINTST);
if (lpc214x_getreg(LPC214X_USBDEV_DMAINTEN) & 1)
{
dmaintstatus |= tmp;
}
lpc214x_putreg(tmp, LPC214X_USBDEV_EOTINTCLR);
tmp = lpc214x_getreg(LPC214X_USBDEV_NDDRINTST);
if (lpc214x_getreg(LPC214X_USBDEV_DMAINTEN) & 2)
{
dmaintstatus |= tmp;
}
lpc214x_putreg(tmp, LPC214X_USBDEV_NDDRINTCLR);
tmp = lpc214x_getreg(LPC214X_USBDEV_SYSERRINTST);
if (lpc214x_getreg(LPC214X_USBDEV_DMAINTEN) & 4)
{
dmaintstatus |= tmp;
}
lpc214x_putreg(tmp, LPC214X_USBDEV_SYSERRINTCLR);
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
/* Loop twice: Process software high priority interrupts on the
* first pass and low priority interrupts on the second.
*/
softprio = priv->softprio;
for (i = 0; i < 2; i++, softprio = ~softprio)
{
/* On the first time through the loop, pending will be
* the bitset of high priority pending interrupts; on the
* second time throught it will be the bitset of low
* priority interrupts. Note that EP0 IN and OUT are
* omitted.
*/
pending = (dmaintstatus & softprio) >> 2;
for (epphy = 2; pending; epphy++, pending >>= 1)
{
if ((pending & 1) != 0)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPDMA), (uint16)epphy);
Loading
Loading full blame...