Newer
Older
/**************************************************************************
* arch/arm/src/lpc17xx/lpc17_lowputc.c
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <arch/irq.h>
#include <arch/board/board.h>
#include "up_internal.h"
#include "up_arch.h"
#include "lpc17_internal.h"
#include "lpc17_uart.h"
#include "lpc17_serial.h"
/**************************************************************************
* Private Definitions
**************************************************************************/
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
/* Select UART parameters for the selected console */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
# define CONSOLE_BASE LPC17_UART0_BASE
# define CONSOLE_BAUD CONFIG_UART0_BAUD
# define CONSOLE_BITS CONFIG_UART0_BITS
# define CONSOLE_PARITY CONFIG_UART0_PARITY
# define CONSOLE_2STOP CONFIG_UART0_2STOP
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
# define CONSOLE_BASE LPC17_UART1_BASE
# define CONSOLE_BAUD CONFIG_UART1_BAUD
# define CONSOLE_BITS CONFIG_UART1_BITS
# define CONSOLE_PARITY CONFIG_UART1_PARITY
# define CONSOLE_2STOP CONFIG_UART1_2STOP
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
# define CONSOLE_BASE LPC17_UART2_BASE
# define CONSOLE_BAUD CONFIG_UART2_BAUD
# define CONSOLE_BITS CONFIG_UART2_BITS
# define CONSOLE_PARITY CONFIG_UART2_PARITY
# define CONSOLE_2STOP CONFIG_UART2_2STOP
#elif defined(CONFIG_UART3_SERIAL_CONSOLE)
# define CONSOLE_BASE LPC17_UART3_BASE
# define CONSOLE_BAUD CONFIG_UART3_BAUD
# define CONSOLE_BITS CONFIG_UART3_BITS
# define CONSOLE_PARITY CONFIG_UART3_PARITY
# define CONSOLE_2STOP CONFIG_UART3_2STOP
#else
# error "No CONFIG_UARTn_SERIAL_CONSOLE Setting"
#endif
/* Get word length setting for the console */
#if CONSOLE_BITS == 5
# define CONSOLE_LCR_WLS UART_LCR_WLS_5BIT
#elif CONSOLE_BITS == 6
# define CONSOLE_LCR_WLS UART_LCR_WLS_6BIT
#elif CONSOLE_BITS == 7
# define CONSOLE_LCR_WLS UART_LCR_WLS_7BIT
#elif CONSOLE_BITS == 8
# define CONSOLE_LCR_WLS UART_LCR_WLS_8BIT
#else
# error "Invalid CONFIG_UARTn_BITS setting for console "
#endif
/* Get parity setting for the console */
#if CONSOLE_PARITY == 0
# define CONSOLE_LCR_PAR 0
#elif CONSOLE_PARITY == 1
# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_ODD)
#elif CONSOLE_PARITY == 2
# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_EVEN)
#elif CONSOLE_PARITY == 3
# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_STICK1)
#elif CONSOLE_PARITY == 4
# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_STICK0)
#else
# error "Invalid CONFIG_UARTn_PARITY setting for CONSOLE"
#endif
#define CONSOLE_LCR_VALUE (CONSOLE_LCR_WLS | CONSOLE_LCR_PAR | CONSOLE_LCR_STOP)
#define CONSOLE_FCR_VALUE (UART_FCR_RXTRIGGER_8 | UART_FCR_TXRST |\
UART_FCR_RXRST | UART_FCR_FIFOEN)
/* Select a CCLK divider to produce the UART PCLK. The stratey is to select the
* smallest divisor that results in an solution within range of the 16-bit
* DLM and DLL divisor:
* BAUD = PCLK / (16 * DL), or
* DL = PCLK / BAUD / 16
* Check divisor == 1. This works if the upper limit is met
* DL < 0xffff, or
* PCLK / BAUD / 16 < 0xffff, or
* CCLK / BAUD / 16 < 0xffff, or
* CCLK < BAUD * 0xffff * 16
* BAUD > CCLK / 0xffff / 16
* And the lower limit is met (we can't allow DL to get very close to one).
*
* DL >= MinDL
* CCLK / BAUD / 16 >= MinDL, or
* BAUD <= CCLK / 16 / MinDL
*/
# define CONSOLE_CCLKDIV SYSCON_PCLKSEL_CCLK
# define CONSOLE_NUMERATOR (LPC17_CCLK)
/* Check divisor == 2. This works if:
*
* 2 * CCLK / BAUD / 16 < 0xffff, or
* BAUD > CCLK / 0xffff / 8
*
* And
*
* 2 * CCLK / BAUD / 16 >= MinDL, or
* BAUD <= CCLK / 8 / MinDL
# define CONSOLE_CCLKDIV SYSCON_PCLKSEL_CCLK2
# define CONSOLE_NUMERATOR (LPC17_CCLK / 2)
/* Check divisor == 4. This works if:
*
* 4 * CCLK / BAUD / 16 < 0xffff, or
* BAUD > CCLK / 0xffff / 4
*
* And
*
* 4 * CCLK / BAUD / 16 >= MinDL, or
* BAUD <= CCLK / 4 / MinDL
*/
# define CONSOLE_CCLKDIV SYSCON_PCLKSEL_CCLK4
# define CONSOLE_NUMERATOR (LPC17_CCLK / 4)
/* Check divisor == 8. This works if:
*
* 8 * CCLK / BAUD / 16 < 0xffff, or
* BAUD > CCLK / 0xffff / 2
*
* And
*
* 8 * CCLK / BAUD / 16 >= MinDL, or
* BAUD <= CCLK / 2 / MinDL
*/
#else /* if CONSOLE_BAUD < (LPC17_CCLK / 2 / UART_MINDL) */
# define CONSOLE_CCLKDIV SYSCON_PCLKSEL_CCLK8
# define CONSOLE_NUMERATOR (LPC17_CCLK / 8)
#endif
/* Then this is the value to use for the DLM and DLL registers */
#define CONSOLE_DL (CONSOLE_NUMERATOR / (CONSOLE_BAUD << 4))
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
/**************************************************************************
* Private Types
**************************************************************************/
/**************************************************************************
* Private Function Prototypes
**************************************************************************/
/**************************************************************************
* Global Variables
**************************************************************************/
/**************************************************************************
* Private Variables
**************************************************************************/
/**************************************************************************
* Private Functions
**************************************************************************/
/**************************************************************************
* Public Functions
**************************************************************************/
/**************************************************************************
* Name: up_lowputc
*
* Description:
* Output one byte on the serial console
*
**************************************************************************/
void up_lowputc(char ch)
{
/* Wait for the transmitter to be available */
while ((getreg32(CONSOLE_BASE+LPC17_UART_LSR_OFFSET) & UART_LSR_THRE) == 0);
/* Send the character */
putreg32((uint32_t)ch, CONSOLE_BASE+LPC17_UART_THR_OFFSET);
}
/**************************************************************************
* Name: lpc17_lowsetup
*
* Description:
* This performs basic initialization of the UART used for the serial
* console. Its purpose is to get the console output availabe as soon
* as possible.
*
* The UART0/1/2/3 peripherals are configured using the following registers:
* 1. Power: In the PCONP register, set bits PCUART0/1/2/3.
* On reset, UART0 and UART 1 are enabled (PCUART0 = 1 and PCUART1 = 1)
* and UART2/3 are disabled (PCUART1 = 0 and PCUART3 = 0).
* 2. Peripheral clock: In the PCLKSEL0 register, select PCLK_UART0 and
* PCLK_UART1; in the PCLKSEL1 register, select PCLK_UART2 and PCLK_UART3.
* 3. Baud rate: In the LCR register, set bit DLAB = 1. This enables access
* to registers DLL and DLM for setting the baud rate. Also, if needed,
* set the fractional baud rate in the fractional divider
* 4. UART FIFO: Use bit FIFO enable (bit 0) in FCR register to
* enable FIFO.
* 5. Pins: Select UART pins through the PINSEL registers and pin modes
* through the PINMODE registers. UART receive pins should not have
* pull-down resistors enabled.
* 6. Interrupts: To enable UART interrupts set bit DLAB = 0 in the LCRF
* register. This enables access to IER. Interrupts are enabled
* in the NVIC using the appropriate Interrupt Set Enable register.
* 7. DMA: UART transmit and receive functions can operate with the
* GPDMA controller.
*
**************************************************************************/
void lpc17_lowsetup(void)
{
/* Step 1: Enable power for all console UART and disable power for
* other UARTs
*/
regval = getreg32(LPC17_SYSCON_PCONP);
regval &= ~(SYSCON_PCONP_PCUART0|SYSCON_PCONP_PCUART1|
regval |= SYSCON_PCONP_PCUART3;
#endif
putreg32(regval, LPC17_SYSCON_PCONP);
/* Step 2: Enable peripheral clocking for the console UART and disable
* clocking for all other UARTs
*/
regval &= ~(SYSCON_PCLKSEL0_UART0_MASK|SYSCON_PCLKSEL0_UART1_MASK);
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
regval |= (CONSOLE_CCLKDIV << SYSCON_PCLKSEL0_UART0_SHIFT);
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
regval |= (CONSOLE_CCLKDIV << SYSCON_PCLKSEL0_UART1_SHIFT);
putreg32(regval, LPC17_SYSCON_PCLKSEL0);
regval = getreg32(LPC17_SYSCON_PCLKSEL1);
regval &= ~(SYSCON_PCLKSEL1_UART2_MASK|SYSCON_PCLKSEL1_UART3_MASK);
#if defined(CONFIG_UART2_SERIAL_CONSOLE)
regval |= (CONSOLE_CCLKDIV << SYSCON_PCLKSEL1_UART2_SHIFT);
#elif defined(CONFIG_UART3_SERIAL_CONSOLE)
regval |= (CONSOLE_CCLKDIV << SYSCON_PCLKSEL1_UART3_SHIFT);
putreg32(regval, LPC17_SYSCON_PCLKSEL1);
/* Configure UART pins for the selected CONSOLE */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
lpc17_configgpio(GPIO_UART0_TXD);
lpc17_configgpio(GPIO_UART0_RXD);
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
lpc17_configgpio(GPIO_UART1_TXD);
lpc17_configgpio(GPIO_UART1_RXD);
lpc17_configgpio(GPIO_UART1_CTS);
lpc17_configgpio(GPIO_UART1_DCD);
lpc17_configgpio(GPIO_UART1_DSR);
lpc17_configgpio(GPIO_UART1_DTR);
lpc17_configgpio(GPIO_UART1_RI);
lpc17_configgpio(GPIO_UART1_RTS);
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
lpc17_configgpio(GPIO_UART2_TXD);
lpc17_configgpio(GPIO_UART2_RXD);
irqrestore(flags);
#elif defined(CONFIG_UART3_SERIAL_CONSOLE)
lpc17_configgpio(GPIO_UART3_TXD);
lpc17_configgpio(GPIO_UART3_RXD);
#if defined(HAVE_CONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG)
/* Clear fifos */
putreg32(UART_FCR_RXRST|UART_FCR_TXRST, CONSOLE_BASE+LPC17_UART_FCR_OFFSET);
/* Set trigger */
putreg32(UART_FCR_FIFOEN|UART_FCR_RXTRIGGER_8, CONSOLE_BASE+LPC17_UART_FCR_OFFSET);
/* Set up the LCR and set DLAB=1 */
putreg32(CONSOLE_LCR_VALUE|UART_LCR_DLAB, CONSOLE_BASE+LPC17_UART_LCR_OFFSET);
putreg32(CONSOLE_DL >> 8, CONSOLE_BASE+LPC17_UART_DLM_OFFSET);
putreg32(CONSOLE_DL & 0xff, CONSOLE_BASE+LPC17_UART_DLL_OFFSET);
putreg32(CONSOLE_LCR_VALUE, CONSOLE_BASE+LPC17_UART_LCR_OFFSET);
putreg32(UART_FCR_RXTRIGGER_8|UART_FCR_TXRST|UART_FCR_RXRST|UART_FCR_FIFOEN,
CONSOLE_BASE+LPC17_UART_FCR_OFFSET);