lpc214x_usbdev.c

  priv->epavail    = LPC214X_EPALLSET;

  /* Initialize the endpoint list */

  for (i = 0; i < LPC214X_NPHYSENDPOINTS; i++)
    {
      uint32 bit = 1 << i;

      /* Set endpoint operations, reference to driver structure (not
       * really necessary because there is only one controller), and
       * the physical endpoint number (which is just the index to the
       * endpoint).
       */
      priv->eplist[i].ep.ops       = &g_epops;
      priv->eplist[i].dev          = priv;
      priv->eplist[i].epphy        = i;

      /* The maximum packet size may depend on the type of endpoint */

      if ((LPC214X_EPCTRLSET & bit) != 0)
        {
          priv->eplist[i].ep.maxpacket = LPC214X_EP0MAXPACKET;
        }
      else if ((LPC214X_EPINTRSET & bit) != 0)
        {
          priv->eplist[i].ep.maxpacket = LPC214X_INTRMAXPACKET;
        }
      else if ((LPC214X_EPBULKSET & bit) != 0)
        {
          priv->eplist[i].ep.maxpacket = LPC214X_BULKMAXPACKET;
        }
      else /* if ((LPC214X_EPISOCSET & bit) != 0) */
        {
          priv->eplist[i].ep.maxpacket = LPC214X_ISOCMAXPACKET;
        }
    }

  /* Turn on USB power and clocking */

  reg = lpc214x_getreg(LPC214X_PCON_PCONP);
  reg |= LPC214X_PCONP_PCUSB;
  lpc214x_putreg(reg, LPC214X_PCON_PCONP);

  /* Attach USB controller interrupt handler */

  if (irq_attach(LPC214X_USB_IRQ, lpc214x_usbinterrupt) != 0)
    {
      usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_IRQREGISTRATION),
               (uint16)LPC214X_USB_IRQ);
      goto errout;
    }

  /* Enable USB inerrupts at the controller -- but do not disable
   * the ARM interrupt until the device is bound to the class
   * driver
   */

  lpc214x_putreg(USBDEV_INTST_ENUSBINTS, LPC214X_USBDEV_INTST);

  /* Disconnect device */

  lpc214x_pullup(&priv->usbdev, FALSE);

  /* Enable EP0 for OUT (host-to-device) */

  lpc214x_usbcmd(CMD_USB_DEV_SETADDRESS, CMD_USB_SETADDRESS_DEVEN|0);
  lpc214x_usbcmd(CMD_USB_DEV_SETADDRESS, CMD_USB_SETADDRESS_DEVEN|0);

  /* Reset/Re-initialize the USB hardware */

  lpc214x_usbreset(priv);

  /* Init Device state structure */

  priv->devstatus = lpc214x_usbcmd(CMD_USB_DEV_GETSTATUS, 0);
  return;

errout:
  up_usbuninitialize();
}

/*******************************************************************************
 * Name: up_usbuninitialize
 *******************************************************************************/

void up_usbuninitialize(void)
{
  struct lpc214x_usbdev_s *priv = &g_usbdev;
  uint32 reg;
  irqstate_t flags;

  usbtrace(TRACE_DEVUNINIT, 0);

  if (priv->driver)
    {
      usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_DRIVERREGISTERED), 0);
      usbdev_unregister(priv->driver);
    }

  /* Disconnect device */

  flags = irqsave();
  lpc214x_pullup(&priv->usbdev, FALSE);
  priv->usbdev.speed = USB_SPEED_UNKNOWN;
  lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);

  /* Disable and detach IRQs */

  up_disable_irq(LPC214X_USB_IRQ);
  irq_detach(LPC214X_USB_IRQ);

  /* Turn off USB power and clocking */

  reg = lpc214x_getreg(LPC214X_PCON_PCONP);
  reg &= ~LPC214X_PCONP_PCUSB;
  lpc214x_putreg(reg, LPC214X_PCON_PCONP);
  irqrestore(flags);
}

/*******************************************************************************
 * Name: usbdev_register
 *
 * Description:
 *   Register a USB device class driver. The class driver's bind() method will be
 *   called to bind it to a USB device driver.
 *
 *******************************************************************************/

int usbdev_register(struct usbdevclass_driver_s *driver)
{
  int ret;

  usbtrace(TRACE_DEVREGISTER, 0);

#ifdef CONFIG_DEBUG
  if (!driver || !driver->ops->bind || !driver->ops->unbind ||
      !driver->ops->disconnect || !driver->ops->setup)
    {
      usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_INVALIDPARMS), 0);
      return -EINVAL;
    }

  if (g_usbdev.driver)
    {
      usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_DRIVER), 0);
      return -EBUSY;
    }
#endif

  /* First hook up the driver */

  g_usbdev.driver = driver;

  /* Then bind the class driver */

  ret = CLASS_BIND(driver, &g_usbdev.usbdev);
  if (ret)
    {
      usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BINDFAILED), (uint16)-ret);
      g_usbdev.driver = NULL;
    }
  else
    {
      /* Enable USB controller interrupts */

      up_enable_irq(LPC214X_USB_IRQ);
    }
  return ret;
}

/*******************************************************************************
 * Name: usbdev_unregister
 *
 * Description:
 *   Un-register usbdev class driver.If the USB device is connected to a USB host,
 *   it will first disconnect().  The driver is also requested to unbind() and clean
 *   up any device state, before this procedure finally returns.
 *
 *******************************************************************************/

int usbdev_unregister(struct usbdevclass_driver_s *driver)
{
  usbtrace(TRACE_DEVUNREGISTER, 0);

#ifdef CONFIG_DEBUG
  if (driver != g_usbdev.driver)
    {
      usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_INVALIDPARMS), 0);
      return -EINVAL;
    }
#endif

  /* Unbind the class driver */

  CLASS_UNBIND(driver, &g_usbdev.usbdev);

  /* Disable USB controller interrupts */

  up_disable_irq(LPC214X_USB_IRQ);

  /* Unhook the driver */

  g_usbdev.driver = NULL;
  return OK;
}