Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
/*******************************************************************************
* arch/arm/src/lpc214x/lpc214x_usbdev.c
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*******************************************************************************/
/*******************************************************************************
* Included Files
*******************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/usb.h>
#include <nuttx/usbdev.h>
#include <nuttx/usbdev_trace.h>
#include <arch/irq.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "lpc214x_usbdev.h"
#include "lpc214x_power.h"
/*******************************************************************************
* Definitions
*******************************************************************************/
/* Configuration ***************************************************************/
#ifndef CONFIG_USBDEV_EP0_MAXSIZE
# define CONFIG_USBDEV_EP0_MAXSIZE 64
#endif
#ifndef CONFIG_USBDEV_MAXPOWER
# define CONFIG_USBDEV_MAXPOWER 100 /* mA */
#endif
#define USB_SLOW_INT USBDEV_DEVINT_EPSLOW
#define USB_DEVSTATUS_INT USBDEV_DEVINT_DEVSTAT
#ifdef CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT
# define USB_FAST_INT USBDEV_DEVINT_EPFAST
#else
# define USB_FAST_INT 0
#endif
/* Extremely detailed register debug that you would normally never want
* enabled.
*/
#undef CONFIG_LPC214X_USBDEV_REGDEBUG
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
/* Enable reading SOF from interrupt handler vs. simply reading on demand. Probably
* a bad idea... Unless there is some issue with sampling the SOF from hardware
* asynchronously.
*/
#ifdef CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
# define USB_FRAME_INT USBDEV_DEVINT_FRAME
#else
# define USB_FRAME_INT 0
#endif
#ifdef CONFIG_DEBUG
# define USB_ERROR_INT USBDEV_DEVINT_EPRINT
#else
# define USB_ERROR_INT 0
#endif
/* Number of DMA descriptors */
#ifdef CONFIG_LPC214X_USBDEV_DMA
# error DMA SUPPORT NOT YET FULLY IMPLEMENTED
# ifndef CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS
# define CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS 8
# elif CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS > 30
# define CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS 30
# endif
#endif
/* Debug ***********************************************************************/
/* Trace error codes */
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
#define LPC214X_TRACEERR_ALLOCFAIL 0x0001
#define LPC214X_TRACEERR_BADCLEARFEATURE 0x0002
#define LPC214X_TRACEERR_BADDEVGETSTATUS 0x0003
#define LPC214X_TRACEERR_BADEPNO 0x0004
#define LPC214X_TRACEERR_BADEPGETSTATUS 0x0005
#define LPC214X_TRACEERR_BADEPTYPE 0x0006
#define LPC214X_TRACEERR_BADGETCONFIG 0x0007
#define LPC214X_TRACEERR_BADGETSETDESC 0x0008
#define LPC214X_TRACEERR_BADGETSTATUS 0x0009
#define LPC214X_TRACEERR_BADREQUEST 0x000a
#define LPC214X_TRACEERR_BADSETADDRESS 0x000b
#define LPC214X_TRACEERR_BADSETCONFIG 0x000c
#define LPC214X_TRACEERR_BADSETFEATURE 0x000d
#define LPC214X_TRACEERR_BINDFAILED 0x000e
#define LPC214X_TRACEERR_DMABUSY 0x000f
#define LPC214X_TRACEERR_DRIVER 0x0010
#define LPC214X_TRACEERR_DRIVERREGISTERED 0x0011
#define LPC214X_TRACEERR_EP0INSTALLED 0x0012
#define LPC214X_TRACEERR_EP0OUTSTALLED 0x0013
#define LPC214X_TRACEERR_EP0SETUPSTALLED 0x0014
#define LPC214X_TRACEERR_EPINNULLPACKET 0x0015
#define LPC214X_TRACEERR_EPOUTNULLPACKET 0x0016
#define LPC214X_TRACEERR_EPREAD 0x0017
#define LPC214X_TRACEERR_INVALIDCMD 0x0018
#define LPC214X_TRACEERR_INVALIDCTRLREQ 0x0019
#define LPC214X_TRACEERR_INVALIDPARMS 0x001a
#define LPC214X_TRACEERR_IRQREGISTRATION 0x001b
#define LPC214X_TRACEERR_NODMADESC 0x001c
#define LPC214X_TRACEERR_NOEP 0x001d
#define LPC214X_TRACEERR_NOTCONFIGURED 0x001e
#define LPC214X_TRACEERR_REQABORTED 0x001f
/* Trace interrupt codes */
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
#define LPC214X_TRACEINTID_USB 0x0001
#define LPC214X_TRACEINTID_CLEARFEATURE 0x0002
#define LPC214X_TRACEINTID_CONNECTCHG 0x0003
#define LPC214X_TRACEINTID_CONNECTED 0x0004
#define LPC214X_TRACEINTID_DEVGETSTATUS 0x0005
#define LPC214X_TRACEINTID_DEVRESET 0x0006
#define LPC214X_TRACEINTID_DEVSTAT 0x0007
#define LPC214X_TRACEINTID_DISCONNECTED 0x0008
#define LPC214X_TRACEINTID_DISPATCH 0x0009
#define LPC214X_TRACEINTID_EP0IN 0x000a
#define LPC214X_TRACEINTID_EP0OUT 0x000b
#define LPC214X_TRACEINTID_EP0SETUP 0x000c
#define LPC214X_TRACEINTID_EPDMA 0x000d
#define LPC214X_TRACEINTID_EPFAST 0x000e
#define LPC214X_TRACEINTID_EPGETSTATUS 0x000f
#define LPC214X_TRACEINTID_EPIN 0x0010
#define LPC214X_TRACEINTID_EPINQEMPTY 0x0011
#define LPC214X_TRACEINTID_EP0INSETADDRESS 0x0012
#define LPC214X_TRACEINTID_EPOUT 0x0013
#define LPC214X_TRACEINTID_EPOUTQEMPTY 0x0014
#define LPC214X_TRACEINTID_EP0SETUPSETADDRESS 0x0015
#define LPC214X_TRACEINTID_EPRINT 0x0016
#define LPC214X_TRACEINTID_EPSLOW 0x0017
#define LPC214X_TRACEINTID_FRAME 0x0018
#define LPC214X_TRACEINTID_GETCONFIG 0x0019
#define LPC214X_TRACEINTID_GETSETDESC 0x001a
#define LPC214X_TRACEINTID_GETSETIF 0x001b
#define LPC214X_TRACEINTID_GETSTATUS 0x001c
#define LPC214X_TRACEINTID_IFGETSTATUS 0x001d
#define LPC214X_TRACEINTID_SETCONFIG 0x001e
#define LPC214X_TRACEINTID_SETFEATURE 0x001f
#define LPC214X_TRACEINTID_SUSPENDCHG 0x0020
#define LPC214X_TRACEINTID_SYNCHFRAME 0x0021
/* Hardware interface **********************************************************/
/* Macros for testing the device status response */
#define DEVSTATUS_CONNECT(s) (((s)&USBDEV_DEVSTATUS_CONNECT)!=0)
#define DEVSTATUS_CONNCHG(s) (((s)&USBDEV_DEVSTATUS_CONNCHG)!=0)
#define DEVSTATUS_SUSPEND(s) (((s)&USBDEV_DEVSTATUS_SUSPEND)!=0)
#define DEVSTATUS_SUSPCHG(s) (((s)&USBDEV_DEVSTATUS_SUSPCHG)!=0)
#define DEVSTATUS_RESET(s) (((s)&USBDEV_DEVSTATUS_RESET)!=0)
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
/* If this bit is set in the lpc214x_epread response, it means that the
* recevied packet was overwritten by a later setup packet (ep0 only).
*/
#define LPC214X_READOVERRUN_BIT (0x80000000)
#define LPC214X_READOVERRUN(s) (((s) & LPC214X_READOVERRUN_BIT) != 0)
/* USB RAM ********************************************************************
*
* UBS_UDCA is is list of 32 pointers to DMA desciptors located at the
* beginning of USB RAM. Each pointer points to a DMA descriptor with
* assocated DMA buffer.
*/
#define USB_UDCA (uint32*)LPC214X_USBDEV_RAMBASE)
#define USB_USCASIZE (LPC214X_NPHYSENDPOINTS*sizeof(uint32))
/* Each descriptor must be aligned to a 128 address boundary */
#define USB_DDALIGNDOWN(a) ((a)&~0x7f)
#define USB_DDALIGNUP(a) USB_DDALIGNDOWN((a)+0x7f)
#define USB_DDSIZE USB_DDALIGNDOWN((LPC214X_USBDEV_RAMSIZE-USB_USCASIZE)/CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS)
#define USB_DDESC ((struct lpc214x_dmadesc_s*)(LPC214X_USBDEV_RAMBASE+USB_USCASIZE))
#ifdef CONFIG_USBDEV_ISOCHRONOUS
# define USB_DDESCSIZE (5*sizeof(uint32))
#else
# define USB_DDESCSIZE (4*sizeof(uint32))
#endif
/* Endpoints ******************************************************************/
/* Number of endpoints */
#define LPC214X_NLOGENDPOINTS (16) /* ep0-15 */
#define LPC214X_NPHYSENDPOINTS (32) /* x2 for IN and OUT */
/* Odd physical endpoint numbers are IN; even are out */
#define LPC214X_EPPHYIN(epphy) (((epphy)&1)!=0)
#define LPC214X_EPPHYOUT(epphy) (((epphy)&1)==0)
/* Mapping to more traditional endpoint numbers */
#define LPC214X_EP_LOG2PHYOUT(ep) ((ep)&0x0f)<<1))
#define LPC214X_EP_LOG2PHYIN(ep) (LPC214X_EP_OUT(ep)|0x01)
#define LPC214X_EP_LOG2PHY(ep) ((((ep)&0x0f)<<1)|(((ep)&0x80)>>7))
/* Each endpoint has somewhat different characteristics */
#define LPC214X_EPALLSET (0xffffffff) /* All endpoints */
#define LPC214X_EPOUTSET (0x55555555) /* Even phy endpoint numbers are OUT EPs */
#define LPC214X_EPINSET (0xaaaaaaaa) /* Odd endpoint numbers are IN EPs */
#define LPC214X_EPCTRLSET (0x00000003) /* EP0 IN/OUT are control endpoints */
#define LPC214X_EPINTRSET (0x0c30c30c) /* Interrupt endpoints */
#define LPC214X_EPBULKSET (0xf0c30c30) /* Bulk endpoints */
#define LPC214X_EPISOCSET (0x030c30c0) /* Isochronous endpoints */
#define LPC214X_EPDBLBUFFER (0xf3cf3cf0) /* Double buffered endpoints */
#define LPC214X_EP0MAXPACKET (64) /* EP0 max packet size (1-64) */
#define LPC214X_BULKMAXPACKET (64) /* Bulk endpoint max packet (8/16/32/64) */
#define LPC214X_INTRMAXPACKET (64) /* Interrupt endpoint max packet (1 to 64) */
#define LPC214X_ISOCMAXPACKET (512) /* Acutally 1..1023 */
/* EP0 status. EP0 transfers occur in a number of different contexts. A
* simple state machine is required to handle the various transfer complete
* interrupt responses. The following values are the various states:
*/
/*** INTERRUPT CAUSE ***/
#define LPC214X_EP0REQUEST (0) /* Normal request handling */
#define LPC214X_EP0STATUSIN (1) /* Status sent */
#define LPC214X_EP0STATUSOUT (2) /* Status received */
#define LPC214X_EP0SHORTWRITE (3) /* Short data sent with no request */
#define LPC214X_EP0SHORTWRSENT (4) /* Short data write complete */
#define LPC214X_EP0SETADDRESS (5) /* Set address received */
#define LPC214X_EP0WRITEREQUEST (6) /* EP0 write request sent */
/* Request queue operations ****************************************************/
#define lpc214x_rqempty(ep) ((ep)->head == NULL)
#define lpc214x_rqpeek(ep) ((ep)->head)
/*******************************************************************************
* Private Types
*******************************************************************************/
/* A container for a request so that the request make be retained in a list */
struct lpc214x_req_s
{
struct usbdev_req_s req; /* Standard USB request */
struct lpc214x_req_s *flink; /* Supports a singly linked list */
};
/* This is the internal representation of an endpoint */
struct lpc214x_ep_s
{
/* Common endpoint fields. This must be the first thing defined in the
* structure so that it is possible to simply cast from struct usbdev_ep_s
* to struct lpc214x_ep_s.
*/
struct usbdev_ep_s ep; /* Standard endpoint structure */
/* LPC214X-specific fields */
struct lpc214x_usbdev_s *dev; /* Reference to private driver data */
struct lpc214x_req_s *head; /* Request list for this endpoint */
struct lpc214x_req_s *tail;
ubyte epphy; /* Physical EP address */
ubyte stalled:1; /* Endpoint is halted */
ubyte halted:1; /* Endpoint feature halted */
ubyte txnullpkt:1; /* Null packet needed at end of transfer */
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
};
/* This represents a DMA descriptor */
#ifdef CONFIG_LPC214X_USBDEV_DMA
struct lpc214x_dmadesc_s
{
uint32 nextdesc; /* Address of the next DMA descripto in RAM */
uint32 config; /* Misc. bit encoded configuration information */
uint32 start; /* DMA start address */
uint32 status; /* Misc. bit encoded status inforamation */
#ifdef CONFIG_USBDEV_ISOCHRONOUS
uint32 size; /* Isochronous packet size address */
#endif
ubyte buffer[USB_DDSIZE-USB_DDESCSIZE];
};
#endif
/* This structure retains the state of the USB device controller */
struct lpc214x_usbdev_s
{
/* Common device fields. This must be the first thing defined in the
* structure so that it is possible to simply cast from struct usbdev_s
* to structlpc214x_usbdev_s.
*/
struct usbdev_s usbdev;
/* The bound device class driver */
struct usbdevclass_driver_s *driver;
/* LPC214X-specific fields */
ubyte devstatus; /* Last response to device status command */
ubyte ep0state; /* State of certain EP0 operations */
ubyte paddr; /* Address assigned by SETADDRESS */
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
ubyte stalled:1; /* 1: Protocol stalled */
ubyte selfpowered:1; /* 1: Device is self powered */
ubyte paddrset:1; /* 1: Peripheral addr has been set */
ubyte attached:1; /* 1: Host attached */
ubyte rxpending:1; /* 1: RX pending */
uint32 epavail; /* Available endpoints */
uint32 softprio; /* Bitset of high priority interrupts */
uint32 wravail; /* Bitset of available endpoints */
#ifdef CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
uint32 sof; /* Last start-of-frame */
#endif
/* Allocated DMA descriptor */
#ifdef CONFIG_LPC214X_USBDEV_DMA
struct lpc214x_dmadesc_s *dmadesc;
#endif
/* The endpoint list */
struct lpc214x_ep_s eplist[LPC214X_NPHYSENDPOINTS];
};
/*******************************************************************************
* Private Function Prototypes
*******************************************************************************/
/* Register operations ********************************************************/
#if defined(CONFIG_LPC214X_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32 lpc214x_getreg(uint32 addr);
static void lpc214x_putreg(uint32 val, uint32 addr);
#else
# define lpc214x_getreg(addr) getreg32(addr)
# define lpc214x_putreg(val,addr) putreg32(val,addr)
#endif
/* Command operations **********************************************************/
static uint32 lpc214x_usbcmd(uint16 cmd, ubyte data);
/* Request queue operations ****************************************************/
static FAR struct lpc214x_req_s *lpc214x_rqdequeue(FAR struct lpc214x_ep_s *privep);
static void lpc214x_rqenqueue(FAR struct lpc214x_ep_s *privep,
FAR struct lpc214x_req_s *req);
/* Low level data transfers and request operations *****************************/
static void lpc214x_epwrite(ubyte epphy, const ubyte *data, uint32 nbytes);
static int lpc214x_epread(ubyte epphy, ubyte *data, uint32 nbytes);
static inline void lpc214x_abortrequest(struct lpc214x_ep_s *privep,
struct lpc214x_req_s *privreq, sint16 result);
static void lpc214x_reqcomplete(struct lpc214x_ep_s *privep, sint16 result);
static int lpc214x_wrrequest(struct lpc214x_ep_s *privep);
static int lpc214x_rdrequest(struct lpc214x_ep_s *privep);
static void lpc214x_cancelrequests(struct lpc214x_ep_s *privep);
/* Interrupt handling **********************************************************/
static void lpc214x_eprealize(struct lpc214x_ep_s *privep, boolean prio,
uint32 packetsize);
static ubyte lpc214x_epclrinterrupt(ubyte epphy);
static inline void lpc214x_ep0configure(struct lpc214x_usbdev_s *priv);
#ifdef CONFIG_LPC214X_USBDEV_DMA
static inline void lpc214x_dmareset(uint32 enable);
#endif
static void lpc214x_usbreset(struct lpc214x_usbdev_s *priv);
static void lpc214x_dispatchrequest(struct lpc214x_usbdev_s *priv,
static inline void lpc214x_ep0setup(struct lpc214x_usbdev_s *priv);
static inline void lpc214x_ep0dataoutinterrupt(struct lpc214x_usbdev_s *priv);
static inline void lpc214x_ep0dataininterrupt(struct lpc214x_usbdev_s *priv);
static int lpc214x_usbinterrupt(int irq, FAR void *context);
#ifdef CONFIG_LPC214X_USBDEV_DMA
static int lpc214x_dmasetup(struct lpc214x_usbdev_s *priv, ubyte epphy,
uint32 epmaxsize, uint32 nbytes, uint32 *isocpacket,
boolean isochronous);
static void lpc214x_dmarestart(ubyte epphy, uint32 descndx);
static void lpc214x_dmadisable(ubyte epphy);
#endif /* CONFIG_LPC214X_USBDEV_DMA */
/* Endpoint operations *********************************************************/
static int lpc214x_epconfigure(FAR struct usbdev_ep_s *ep,
const struct usb_epdesc_s *desc);
static int lpc214x_epdisable(FAR struct usbdev_ep_s *ep);
static FAR struct usbdev_req_s *lpc214x_epallocreq(FAR struct usbdev_ep_s *ep);
static void lpc214x_epfreereq(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *);
#ifdef CONFIG_LPC214X_USBDEV_DMA
static FAR void *lpc214x_epallocbuffer(FAR struct usbdev_ep_s *ep,
uint16 nbytes);
static void lpc214x_epfreebuffer(FAR struct usbdev_ep_s *ep, void *buf);
#endif
static int lpc214x_epsubmit(FAR struct usbdev_ep_s *ep,
struct usbdev_req_s *req);
static int lpc214x_epcancel(FAR struct usbdev_ep_s *ep,
struct usbdev_req_s *req);
static int lpc214x_epstall(FAR struct usbdev_ep_s *ep, boolean resume);
/* USB device controller operations ********************************************/
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
static FAR struct usbdev_ep_s *lcp214x_allocep(FAR struct usbdev_s *dev,
ubyte epno, boolean in, ubyte eptype);
static void lpc214x_freeep(FAR struct usbdev_s *dev, FAR struct usbdev_ep_s *ep);
static int lpc214x_getframe(struct usbdev_s *dev);
static int lpc214x_wakeup(struct usbdev_s *dev);
static int lpc214x_selfpowered(struct usbdev_s *dev, boolean selfpowered);
static int lpc214x_pullup(struct usbdev_s *dev, boolean enable);
/*******************************************************************************
* Private Data
*******************************************************************************/
/* Since there is only a single USB interface, all status information can be
* be simply retained in a single global instance.
*/
static struct lpc214x_usbdev_s g_usbdev;
static const struct usbdev_epops_s g_epops =
{
.configure = lpc214x_epconfigure,
.disable = lpc214x_epdisable,
.allocreq = lpc214x_epallocreq,
.freereq = lpc214x_epfreereq,
#ifdef CONFIG_LPC214X_USBDEV_DMA
.allocbuffer = lpc214x_epallocbuffer,
.freebuffer = lpc214x_epfreebuffer,
#endif
.submit = lpc214x_epsubmit,
.cancel = lpc214x_epcancel,
.stall = lpc214x_epstall,
};
static const struct usbdev_ops_s g_devops =
{
.allocep = lcp214x_allocep,
.freeep = lpc214x_freeep,
.getframe = lpc214x_getframe,
.wakeup = lpc214x_wakeup,
.selfpowered = lpc214x_selfpowered,
.pullup = lpc214x_pullup,
};
/*******************************************************************************
* Public Data
*******************************************************************************/
/*******************************************************************************
* Private Functions
*******************************************************************************/
/*******************************************************************************
* Name: lpc214x_getreg
*
* Description:
* Get the contents of an LPC214x register
*
*******************************************************************************/
#if defined(CONFIG_LPC214X_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32 lpc214x_getreg(uint32 addr)
{
static uint32 prevaddr = 0;
static uint32 preval = 0;
static uint32 count = 0;
/* Read the value from the register */
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
/* Is this the same value that we read from the same registe last time? Are
* we polling the register? If so, suppress some of the output.
*/
if (addr == prevaddr || val == preval)
{
if (count == 0xffffffff || ++count > 3)
{
if (count == 4)
{
lldbg("...\n");
}
return val;
}
}
/* No this is a new address or value */
else
{
/* Did we print "..." for the previous value? */
if (count > 3)
{
/* Yes.. then show how many times the value repeated */
lldbg("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
prevaddr = addr;
preval = val;
count = 1;
}
/* Show the register value read */
lldbg("%08x->%08x\n", addr, val);
return val;
}
#endif
/*******************************************************************************
* Name: lpc214x_putreg
*
* Description:
* Set the contents of an LPC214x register to a value
*
*******************************************************************************/
#if defined(CONFIG_LPC214X_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG)
static void lpc214x_putreg(uint32 val, uint32 addr)
{
/* Show the register value being written */
lldbg("%08x<-%08x\n", addr, val);
/* Write the value */
putreg32(val, addr);
}
#endif
/*******************************************************************************
* Name: lpc214x_usbcmd
*
* Description:
* Transmit commands to the USB engine
*
*******************************************************************************/
static uint32 lpc214x_usbcmd(uint16 cmd, ubyte data)
{
irqstate_t flags;
uint32 tmp = 0;
/* Disable interrupt and clear CDFULL and CCEMPTY interrupt status */
flags = irqsave();
lpc214x_putreg(USBDEV_DEVINT_CDFULL|USBDEV_DEVINT_CCEMTY, LPC214X_USBDEV_DEVINTCLR);
/* Load command + WR in command code register */
lpc214x_putreg(((cmd & 0xff) << 16) + CMD_USB_CMDWR, LPC214X_USBDEV_CMDCODE);
/* Wait until the command register is empty (CCEMPTY != 0, command is accepted) */
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CCEMTY) == 0);
/* Clear command register empty (CCEMPTY) interrupt */
lpc214x_putreg(USBDEV_DEVINT_CCEMTY, LPC214X_USBDEV_DEVINTCLR);
/* Write operations (1 byte of data) */
case CMD_USB_DEV_SETADDRESS:
case CMD_USB_DEV_CONFIG:
case CMD_USB_DEV_SETMODE:
case CMD_USB_DEV_SETSTATUS:
{
/* Send data + WR and wait for CCEMPTY */
lpc214x_putreg((data << 16) + CMD_USB_DATAWR, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CCEMTY) == 0);
}
case CMD_USB_DEV_READFRAMENO:
case CMD_USB_DEV_READTESTREG:
{
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Clear CDFULL and read LS data */
lpc214x_putreg(USBDEV_DEVINT_CDFULL, LPC214X_USBDEV_DEVINTCLR);
tmp = lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Read MS data */
tmp |= lpc214x_getreg(LPC214X_USBDEV_CMDDATA) << 8;
}
case CMD_USB_DEV_GETSTATUS:
case CMD_USB_DEV_GETERRORCODE:
case CMD_USB_DEV_READERRORSTATUS:
case CMD_USB_EP_CLRBUFFER:
{
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Read data */
tmp = lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
}
/* No data transfer */
case CMD_USB_EP_VALIDATEBUFFER:
break;
default:
switch (cmd & 0x1e0)
{
case CMD_USB_EP_SELECT:
case CMD_USB_EP_SELECTCLEAR:
{
/* Send command code + RD and wait for CDFULL */
lpc214x_putreg((cmd << 16) + CMD_USB_DATARD, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Read data */
tmp = lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
}
break;
case CMD_USB_EP_SETSTATUS:
{
/* Send data + RD and wait for CCEMPTY */
lpc214x_putreg((data << 16) + CMD_USB_DATAWR, LPC214X_USBDEV_CMDCODE);
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CCEMTY) == 0);
}
break;
default:
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_INVALIDCMD), 0);
break;
}
break;
}
/* Restore the interrupt flags */
irqrestore(flags);
return tmp;
}
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
/*******************************************************************************
* Name: lpc214x_rqdequeue
*
* Description:
* Remove a request from an endpoint request queue
*
*******************************************************************************/
static FAR struct lpc214x_req_s *lpc214x_rqdequeue(FAR struct lpc214x_ep_s *privep)
{
FAR struct lpc214x_req_s *ret = privep->head;
if (ret)
{
privep->head = ret->flink;
if (!privep->head)
{
privep->tail = NULL;
}
ret->flink = NULL;
}
return ret;
}
/*******************************************************************************
* Name: lpc214x_rqenqueue
*
* Description:
* Add a request from an endpoint request queue
*
*******************************************************************************/
static void lpc214x_rqenqueue(FAR struct lpc214x_ep_s *privep,
FAR struct lpc214x_req_s *req)
{
req->flink = NULL;
if (!privep->head)
{
privep->head = req;
privep->tail = req;
}
else
{
privep->tail->flink = req;
privep->tail = req;
}
}
/*******************************************************************************
* Name: lpc214x_epwrite
*
* Description:
* Endpoint write (IN)
*
*******************************************************************************/
static void lpc214x_epwrite(ubyte epphy, const ubyte *data, uint32 nbytes)
{
uint32 value;
boolean aligned = (((uint32)data & 3) == 0);
/* Set the write enable bit for this physical EP address */
lpc214x_putreg(((epphy << 1) & LPC214X_USBCTRL_EPMASK) | LPC214X_USBCTRL_WREN,
LPC214X_USBDEV_CTRL);
/* Set the transmit packet length (nbytes must be less than 2048) */
/* Transfer the packet data */
do
{
/* Zero length packets are a special case */
if (nbytes)
{
if (aligned)
{
value = *(uint32*)data;
}
else
{
value = (uint32)data[0] | ((uint32)data[1] << 8) |
((uint32)data[2] << 16) | ((uint32)data[3] << 24);
}
lpc214x_putreg(value, LPC214X_USBDEV_TXDATA);
data += 4;
}
else
{
/* Zero length packet */
lpc214x_putreg(0, LPC214X_USBDEV_TXDATA);
while ((lpc214x_getreg(LPC214X_USBDEV_CTRL) & LPC214X_USBCTRL_WREN) != 0);
(void)lpc214x_usbcmd(CMD_USB_EP_SELECT | epphy, 0);
(void)lpc214x_usbcmd(CMD_USB_EP_VALIDATEBUFFER, 0);
}
/*******************************************************************************
* Name: lpc214x_epread
*
* Description:
* Endpoint read (OUT)
*
*******************************************************************************/
static int lpc214x_epread(ubyte epphy, ubyte *data, uint32 nbytes)
{
uint32 pktlen;
uint32 result;
uint32 value;
ubyte aligned = 0;
/* If data is NULL, then we are being asked to read but discard the data.
* For most cases, the resulting buffer will be aligned and we will be
* able to do faster 32-bit transfers.
*/
if (data)
{
if (((uint32)data & 3) == 0)
{
aligned = 1;
}
else
{
aligned = 2;
}
}
/* Set the read enable bit for this physical EP address */
lpc214x_putreg(((epphy << 1) & LPC214X_USBCTRL_EPMASK) | LPC214X_USBCTRL_RDEN,
LPC214X_USBDEV_CTRL);
/* Wait for packet buffer ready for reading */
while ((lpc214x_getreg(LPC214X_USBDEV_RXPLEN) & USBDEV_RXPLEN_PKTRDY) == 0);
pktlen = lpc214x_getreg(LPC214X_USBDEV_RXPLEN) & USBDEV_RXPLEN_PKTLENGTH;
/* Read data from input buffer while read data is valid (DV) */
while ((lpc214x_getreg(LPC214X_USBDEV_RXPLEN) & USBDEV_RXPLEN_DV) != 0)
value = lpc214x_getreg(LPC214X_USBDEV_RXDATA);
if (aligned == 1)
{
*(uint32*)data = value;
data += 4;
}
else if (aligned == 2)
*data++ = (ubyte)value;
*data++ = (ubyte)(value >> 8);
*data++ = (ubyte)(value >> 16);
*data++ = (ubyte)(value >> 24);
}
}
/* Done */
(void)lpc214x_usbcmd(CMD_USB_EP_SELECT | epphy, 0);
result = lpc214x_usbcmd(CMD_USB_EP_CLRBUFFER, 0);
/* The packet overrun bit in the clear buffer response is applicable only
* on EP0 transfers. If set it means that the recevied packet was overwritten
* by a later setup packet.
*/
if (epphy == LPC214X_EP0_OUT && (result & CMD_USB_CLRBUFFER_PO) != 0)
{
/* Pass this information in bit 31 */
pktlen |= LPC214X_READOVERRUN_BIT;
}
return pktlen;
}
/*******************************************************************************
* Name: lpc214x_abortrequest
*
* Description:
* Discard a request
*
*******************************************************************************/
static inline void lpc214x_abortrequest(struct lpc214x_ep_s *privep,
struct lpc214x_req_s *privreq,
sint16 result)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_REQABORTED), (uint16)privep->epphy);
/* Save the result in the request structure */
privreq->req.result = result;
/* Callback to the request completion handler */
privreq->req.callback(&privep->ep, &privreq->req);
}
/*******************************************************************************
* Name: lpc214x_reqcomplete
*
* Description:
* Handle termination of the request at the head of the endpoint request queue.
*
*******************************************************************************/
static void lpc214x_reqcomplete(struct lpc214x_ep_s *privep, sint16 result)
{
struct lpc214x_req_s *privreq;
int stalled = privep->stalled;
irqstate_t flags;
/* Remove the complete request at the head of the endpoint request list */
flags = irqsave();
irqrestore(flags);
if (privreq)
{
/* If endpoint 0, temporarily reflect the state of protocol stalled
* in the callback.
*/
privep->stalled = privep->dev->stalled;
}
/* Save the result in the request structure */
privreq->req.result = result;
/* Callback to the request completion handler */
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
privreq->req.callback(&privep->ep, &privreq->req);
/* Restore the stalled indication */
privep->stalled = stalled;
}
}
/*******************************************************************************
* Name: lpc214x_wrrequest
*
* Description:
* Send from the next queued write request
*
*******************************************************************************/
static int lpc214x_wrrequest(struct lpc214x_ep_s *privep)
{
struct lpc214x_req_s *privreq;
ubyte *buf;
int nbytes;
int bytesleft;
/* Check the request from the head of the endpoint request queue */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPINQEMPTY), 0);
uvdbg("len=%d xfrd=%d nullpkt=%d\n",
privreq->req.len, privreq->req.xfrd, privep->txnullpkt);
/* Ignore any attempt to send a zero length packet on anything but EP0IN */
if (privreq->req.len == 0)
{
if (privep->epphy == LPC214X_EP0_IN)
{
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EPINNULLPACKET), 0);
}
/* In any event, the request is complete */
lpc214x_reqcomplete(privep, OK);
return OK;
}
/* Otherwise send the data in the packet (in the DMA on case, we
* may be resuming transfer already in progress.
*/
#warning REVISIT... Unless the EP supports double buffering, only one packet may be sent
/* Get the number of bytes left to be sent in the packet */
bytesleft = privreq->req.len - privreq->req.xfrd;
/* Send the next packet if (1) there are more bytes to be sent, or
* (2) the last packet sent was exactly maxpacketsize (bytesleft == 0)
*/
usbtrace(TRACE_WRITE(privep->epphy), privreq->req.xfrd);
if (bytesleft > 0 || privep->txnullpkt)
{
/* Try to send maxpacketsize -- unless we don't have that many
* bytes to send.
*/
if (bytesleft > privep->ep.maxpacket)
{
nbytes = privep->ep.maxpacket;
privep->txnullpkt = 0;
}
else
privep->txnullpkt = (bytesleft == privep->ep.maxpacket);
}
/* Send the largest number of bytes that we can in this packet */
buf = privreq->req.buf + privreq->req.xfrd;
lpc214x_epwrite(privep->epphy, buf, nbytes);
/* Update for the next time through the loop */
privreq->req.xfrd += nbytes;
}
/* If all of the bytes were sent (including any final null packet)
* then we are finished with the transfer
if (bytesleft <= 0 || !privep->txnullpkt)
{
usbtrace(TRACE_COMPLETE(privep->epphy), privreq->req.xfrd);
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
lpc214x_reqcomplete(privep, OK);
return OK;
}
}
return OK; /* Won't get here */
}
/*******************************************************************************
* Name: lpc214x_rdrequest
*
* Description:
* Receive to the next queued read request
*
*******************************************************************************/
static int lpc214x_rdrequest(struct lpc214x_ep_s *privep)
{
struct lpc214x_req_s *privreq;
ubyte *buf;
int nbytesread;
/* Check the request from the head of the endpoint request queue */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPOUTQEMPTY), 0);
uvdbg("len=%d xfrd=%d nullpkt=%d\n",
privreq->req.len, privreq->req.xfrd, privep->txnullpkt);
/* Ignore any attempt to receive a zero length packet */
if (privreq->req.len == 0)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EPOUTNULLPACKET), 0);
lpc214x_reqcomplete(privep, OK);
return OK;
}
#warning REVISIT... Unless the EP supports double buffering, only one packet may be received
usbtrace(TRACE_READ(privep->epphy), privreq->req.xfrd);
for (;;)
{
/* Receive the next packet if (1) there are more bytes to be receive, or
* (2) the last packet was exactly maxpacketsize.
*/
buf = privreq->req.buf + privreq->req.xfrd;
nbytesread = lpc214x_epread(privep->epphy, buf, privep->ep.maxpacket);
if (nbytesread < 0)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EPREAD), nbytesread);
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
return ERROR;
}
/* If the receive buffer is full or if the last packet was not full
* then we are finished with the transfer.
*/
privreq->req.xfrd += nbytesread;
if (privreq->req.len < privreq->req.xfrd || nbytesread < privep->ep.maxpacket)
{
usbtrace(TRACE_COMPLETE(privep->epphy), privreq->req.xfrd);
lpc214x_reqcomplete(privep, OK);
return OK;
}
}
return OK; /* Won't get here */
}
/*******************************************************************************
* Name: lpc214x_cancelrequests
*
* Description:
* Cancel all pending requests for an endpoint
*
*******************************************************************************/
static void lpc214x_cancelrequests(struct lpc214x_ep_s *privep)
{
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
lpc214x_reqcomplete(privep, -ESHUTDOWN);
}
}
/*******************************************************************************
* Name: lpc214x_eprealize
*
* Description:
* Enable or disable an endpoint
*
*******************************************************************************/
static void lpc214x_eprealize(struct lpc214x_ep_s *privep, boolean prio, uint32 packetsize)
{
struct lpc214x_usbdev_s *priv = privep->dev;
uint32 mask;
uint32 reg;
/* Initialize endpoint software priority */
mask = 1 << privep->epphy;
if (prio)
{
priv->softprio = priv->softprio | mask;
}
else
{
priv->softprio = priv->softprio & ~mask;
}
/* Clear realize interrupt bit */
lpc214x_putreg(USBDEV_DEVINT_EPRLZED, LPC214X_USBDEV_DEVINTCLR);
/* Realize the endpoint */
reg = lpc214x_getreg(LPC214X_USBDEV_REEP);
reg |= (1 << privep->epphy);
lpc214x_putreg(reg, LPC214X_USBDEV_REEP);
/* Set endpoint maximum packet size */
lpc214x_putreg(privep->epphy, LPC214X_USBDEV_EPIND);
lpc214x_putreg(packetsize, LPC214X_USBDEV_MAXPSIZE);
/* Wait for Realize complete */
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_EPRLZED) == 0);
/* Clear realize interrupt bit */
lpc214x_putreg(USBDEV_DEVINT_EPRLZED,LPC214X_USBDEV_DEVINTCLR);
}
/*******************************************************************************
* Name: lpc214x_epclrinterrupt
*
* Description:
* Clear the EP interrupt flag and return the current EP status
*
*******************************************************************************/
static ubyte lpc214x_epclrinterrupt(ubyte epphy)
{
/* Clear the endpoint interrupt */
lpc214x_putreg(1 << epphy, LPC214X_USBDEV_EPINTCLR);
/* Wait for data in the command data register */
while ((lpc214x_getreg(LPC214X_USBDEV_DEVINTST) & USBDEV_DEVINT_CDFULL) == 0);
/* Return the value of the command data register */
return lpc214x_getreg(LPC214X_USBDEV_CMDDATA);
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
}
/*******************************************************************************
* Name: lpc214x_ep0configure
*
* Description:
* Configure endpoint 0
*
*******************************************************************************/
static inline void lpc214x_ep0configure(struct lpc214x_usbdev_s *priv)
{
uint32 inten;
/* EndPoint 0 initialization */
lpc214x_eprealize(&priv->eplist[LPC214X_CTRLEP_OUT], 0, CONFIG_USBDEV_EP0_MAXSIZE);
lpc214x_eprealize(&priv->eplist[LPC214X_CTRLEP_IN], 1, CONFIG_USBDEV_EP0_MAXSIZE);
/* Enable EP0 interrupts (not DMA) */
inten = lpc214x_getreg(LPC214X_USBDEV_EPINTEN);
inten |= 3; /* EP0 Rx and Tx */
lpc214x_putreg(inten, LPC214X_USBDEV_EPINTEN);
}
/*******************************************************************************
* Name: lpc214x_dmareset
*
* Description: Reset USB DMA
*
*******************************************************************************/
#ifdef CONFIG_LPC214X_USBDEV_DMA
static inline void lpc214x_dmareset(uint32 enable)
{
int i;
/* Disable All DMA interrupts */
lpc214x_putreg(0, LPC214X_USBDEV_DMAINTEN);
lpc214x_putreg(0xffffffff, LPC214X_USBDEV_EPDMADIS);
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
/* DMA Request clear */
putreq32(0xffffffff, LPC214X_USBDEV_DMARCLR);
/* End of Transfer Interrupt Clear */
putreq32(0xffffffff, LPC214X_USBDEV_EOTINTCLR);
/* New DD Request Interrupt Clear */
putreq32(0xffffffff, LPC214X_USBDEV_NDDRINTCLR);
/* System Error Interrupt Clear */
putreq32(0xffffffff, LPC214X_USBDEV_SYSERRINTCLR);
/* Nullify all pointers in the UDCA */
for (i = 0; i < LPC214X_NPHYSENDPOINTS; ++i)
{
USB_UDCA[i] = NULL;
}
/* Set USB UDCA Head register */
lpc214x_putreg((uint32)USB_UDCA, LPC214X_USBDEV_UDCAH);
/* Invalidate all DMA descriptors */
for (i = 0; i < CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS; ++i)
{
memset(&USB_DDESC[i], 0, USB_DDESCSIZE);
}
/* Enable DMA interrupts */
lpc214x_putreg(enable, LPC214X_USBDEV_DMAINTEN);
}
#endif
/*******************************************************************************
* Name: lpc214x_usbreset
*
* Description:
* Reset Usb engine
*
*******************************************************************************/
static void lpc214x_usbreset(struct lpc214x_usbdev_s *priv)
{
/* Disable all endpoint interrupts */
lpc214x_putreg(0, LPC214X_USBDEV_EPINTEN);
/* Frame is Hp interrupt */
lpc214x_putreg(1, LPC214X_USBDEV_DEVINTPRI);
/* Clear all pending interrupts */
lpc214x_putreg(0xffffffff, LPC214X_USBDEV_EPINTCLR);
lpc214x_putreg(0xffffffff, LPC214X_USBDEV_DEVINTCLR);
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
/* Periperhal address is needed */
priv->paddrset = 0;
/* Endpoints not yet configured */
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
/* EndPoint 0 initialization */
lpc214x_ep0configure(priv);
#ifdef CONFIG_LPC214X_USBDEV_DMA
/* Enable End_of_Transfer_Interrupt and System_Error_Interrupt USB DMA
* interrupts
*/
lpc214x_dmareset(CONFIG_LPC214X_USBDEV_DMAINTMASK);
#endif
/* Enable Device interrupts */
lpc214x_putreg(USB_SLOW_INT|USB_DEVSTATUS_INT|USB_FAST_INT|USB_FRAME_INT|USB_ERROR_INT,
LPC214X_USBDEV_DEVINTEN);
}
/*******************************************************************************
* Name: lpc214x_dispatchrequest
*
* Description:
* Provide unhandled setup actions to the class driver. This is logically part
* of the USB interrupt handler.
*
*******************************************************************************/
static void lpc214x_dispatchrequest(struct lpc214x_usbdev_s *priv,
{
int ret;
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DISPATCH), 0);
if (priv && priv->driver)
{
/* Forward to the control request to the class driver implementation */
ret = CLASS_SETUP(priv->driver, &priv->usbdev, ctrl);
if (ret < 0)
{
/* Stall on failure */
priv->stalled = 1;
}
}
}
/*******************************************************************************
* Name: lpc214x_ep0setup
*
* Description:
* USB Ctrl EP Setup Event. This is logically part of the USB interrupt
* handler. This event occurs when a setup packet is receive on EP0 OUT.
*
*******************************************************************************/
static inline void lpc214x_ep0setup(struct lpc214x_usbdev_s *priv)
{
struct lpc214x_ep_s *ep0 = &priv->eplist[LPC214X_EP0_OUT];
struct lpc214x_req_s *privreq = lpc214x_rqpeek(ep0);
ubyte epphy;
ubyte response[2];
int ret;
/* Starting a control request? */
if (priv->usbdev.speed == USB_SPEED_UNKNOWN)
{
priv->usbdev.speed = USB_SPEED_FULL;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 1);
}
/* Terminate any pending requests */
{
sint16 result = OK;
if (privreq->req.xfrd != privreq->req.len)
{
result = -EPROTO;
}
usbtrace(TRACE_COMPLETE(ep0->epphy), privreq->req.xfrd);
lpc214x_reqcomplete(ep0, result);
}
/* Assume NOT stalled */
ep0->stalled = 0;
priv->stalled = 0;
/* Read EP0 data */
ret = lpc214x_epread(LPC214X_EP0_OUT, (ubyte*)&ctrl, USB_SIZEOF_CTRLREQ);
if (ret <= 0)
{
return;
}
/* And extract the little-endian 16-bit values to host order */
value = GETUINT16(ctrl.value);
index = GETUINT16(ctrl.index);
len = GETUINT16(ctrl.len);
uvdbg("type=%02x req=%02x value=%04x index=%04x len=%04x\n",
/* Dispatch any non-standard requests */
if ((ctrl.type & USB_REQ_TYPE_MASK) != USB_REQ_TYPE_STANDARD)
return;
}
/* Handle standard request. Pick off the things of interest to the
* USB device controller driver; pass what is left to the class driver
*/
{
case USB_REQ_GETSTATUS:
{
/* type: device-to-host; recipient = device, interface, endpoint
* value: 0
* index: zero interface endpoint
* len: 2; data = status
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETSTATUS), 0);
if (!priv->paddrset || len != 2 ||
(ctrl.type & USB_REQ_DIR_IN) == 0 || value != 0)
{
priv->stalled = 1;
}
else
{
{
case USB_REQ_RECIPIENT_ENDPOINT:
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPGETSTATUS), 0);
if (epphy < LPC214X_NPHYSENDPOINTS)
{
if ((lpc214x_usbcmd(CMD_USB_EP_SELECT|epphy, 0) & CMD_USB_EPSELECT_ST) != 0)
{
response[0] = 1; /* Stalled */
}
else
{
response[0] = 0; /* Not stalled */
}
response[1] = 0;
lpc214x_epwrite(LPC214X_EP0_IN, response, 2);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADEPGETSTATUS), 0);
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
priv->stalled = 1;
}
}
break;
case USB_REQ_RECIPIENT_DEVICE:
{
if (index == 0)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DEVGETSTATUS), 0);
/* Features: Remote Wakeup=YES; selfpowered=? */
response[0] = (priv->selfpowered << USB_FEATURE_SELFPOWERED) |
(1 << USB_FEATURE_REMOTEWAKEUP);
response[1] = 0;
lpc214x_epwrite(LPC214X_EP0_IN, response, 2);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADDEVGETSTATUS), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_RECIPIENT_INTERFACE:
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_IFGETSTATUS), 0);
response[0] = 0;
response[1] = 0;
lpc214x_epwrite(LPC214X_EP0_IN, response, 2);
priv->ep0state = LPC214X_EP0SHORTWRITE;
}
break;
default:
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADGETSTATUS), 0);
priv->stalled = 1;
}
break;
}
}
}
break;
case USB_REQ_CLEARFEATURE:
{
/* type: host-to-device; recipient = device, interface or endpoint
* value: feature selector
* index: zero interface endpoint;
* len: zero, data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_CLEARFEATURE), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT)
else if (priv->paddrset != 0 && value == USB_FEATURE_ENDPOINTHALT &&
index < LPC214X_NLOGENDPOINTS && len == 0)
priv->eplist[epphys].halted = 0;
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->ep0state = LPC214X_EP0STATUSIN;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADCLEARFEATURE), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_SETFEATURE:
{
/* type: host-to-device; recipient = device, interface, endpoint
* value: feature selector
* index: zero interface endpoint;
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SETFEATURE), 0);
if (((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE) &&
else if ((ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT)
else if (priv->paddrset != 0 && value == USB_FEATURE_ENDPOINTHALT &&
index < LPC214X_NLOGENDPOINTS && len == 0)
priv->eplist[epphys].halted = 1;
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->ep0state = LPC214X_EP0STATUSIN;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADSETFEATURE), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_SETADDRESS:
{
/* type: host-to-device; recipient = device
* value: device address
* index: 0
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0SETUPSETADDRESS), value);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
/* Save the address. We cannot actually change to the next address until
* the completion of the status phase.
*/
priv->paddr = ctrl.value[0];
/* Note that if we send the SETADDRESS command twice, that will force the
* address change. Otherwise, the hardware will automatically set the
* address at the end of the status phase.
*/
lpc214x_usbcmd(CMD_USB_DEV_SETADDRESS, CMD_USB_SETADDRESS_DEVEN | priv->paddr);
/* Send a NULL packet. The status phase completes when the null packet has
* been sent successfully.
*/
lpc214x_epwrite(LPC214X_EP0_IN, NULL, 0);
priv->ep0state = LPC214X_EP0SETADDRESS;
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADSETADDRESS), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_GETDESCRIPTOR:
/* type: device-to-host; recipient = device
* value: descriptor type and index
* index: 0 or language ID;
* len: descriptor len; data = descriptor
*/
/* type: host-to-device; recipient = device
* value: descriptor type and index
* index: 0 or language ID;
* len: descriptor len; data = descriptor
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETSETDESC), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE)
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADGETSETDESC), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_GETCONFIGURATION:
/* type: device-to-host; recipient = device
* value: 0;
* index: 0;
* len: 1; data = configuration value
*/
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETCONFIG), 0);
if (priv->paddrset && (ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
{
lpc214x_dispatchrequest(priv, &ctrl);
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADGETCONFIG), 0);
priv->stalled = 1;
}
}
break;
case USB_REQ_SETCONFIGURATION:
/* type: host-to-device; recipient = device
* value: configuration value
* index: 0;
* len: 0; data = none
*/
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SETCONFIG), 0);
if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE &&
{
lpc214x_dispatchrequest(priv, &ctrl);
}
else
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_BADSETCONFIG), 0);
priv->stalled = 1;
}
}
break;
/* type: device-to-host; recipient = interface
* value: 0
* index: interface;
* len: 1; data = alt interface
*/
/* type: host-to-device; recipient = interface
* value: alternate setting
* index: interface;
* len: 0; data = none
*/
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_GETSETIF), 0);
lpc214x_dispatchrequest(priv, &ctrl);
}
break;
case USB_REQ_SYNCHFRAME:
/* type: device-to-host; recipient = endpoint
* value: 0
* index: endpoint;
* len: 2; data = frame number
*/
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SYNCHFRAME), 0);
}
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_INVALIDCTRLREQ), 0);
priv->stalled = 1;
}
break;
}
if (priv->stalled)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EP0SETUPSTALLED), priv->ep0state);
lpc214x_epstall(&ep0->ep, FALSE);
lpc214x_epstall(&ep0->ep, FALSE);
}
}
/*******************************************************************************
* Name: lpc214x_ep0dataoutinterrupt
*
* Description:
* USB Ctrl EP Data OUT Event. This is logically part of the USB interrupt
* handler. Each non-isochronous OUT endpoint gives an interrupt when they
* receive a packet without error.
*
*******************************************************************************/
static inline void lpc214x_ep0dataoutinterrupt(struct lpc214x_usbdev_s *priv)
{
struct lpc214x_ep_s *ep0;
uint32 pktlen;
/* Copy new setup packet into setup buffer */
switch (priv->ep0state)
{
case LPC214X_EP0SHORTWRITE:
{
priv->ep0state = LPC214X_EP0STATUSOUT;
pktlen = lpc214x_epread(LPC214X_EP0_OUT, NULL, CONFIG_USBDEV_EP0_MAXSIZE);
if (LPC214X_READOVERRUN(pktlen))
{
lpc214x_ep0setup(priv);
}
}
break;
case LPC214X_EP0SHORTWRSENT:
{
priv->ep0state = LPC214X_EP0REQUEST;
pktlen = lpc214x_epread(LPC214X_EP0_OUT, NULL, CONFIG_USBDEV_EP0_MAXSIZE);
if (LPC214X_READOVERRUN(pktlen))
{
lpc214x_ep0setup(priv);
}
}
break;
/* Process the next request action (if any) */
lpc214x_rdrequest(&priv->eplist[LPC214X_EP0_OUT]);
}
break;
default:
priv->stalled = 1;
break;
}
if (priv->stalled)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EP0OUTSTALLED), priv->ep0state);
ep0 = &priv->eplist[LPC214X_EP0_OUT];
lpc214x_epstall(&ep0->ep, FALSE);
lpc214x_epstall(&ep0->ep, FALSE);
}
return;
}
/*******************************************************************************
* Name: lpc214x_ep0dataininterrupt
*
* Description:
* USB Ctrl EP Data IN Event. This is logically part of the USB interrupt
* handler. All non-isochronous IN endpoints give this interrupt when a
* packet is successfully transmitted (OR a NAK handshake is sent on the bus
* provided that the interrupt on NAK feature is enabled).
*
*******************************************************************************/
static inline void lpc214x_ep0dataininterrupt(struct lpc214x_usbdev_s *priv)
{
struct lpc214x_ep_s *ep0;
switch (priv->ep0state)
{
case LPC214X_EP0STATUSOUT:
case LPC214X_EP0STATUSIN:
priv->ep0state = LPC214X_EP0REQUEST;
break;
case LPC214X_EP0SHORTWRITE:
priv->ep0state = LPC214X_EP0SHORTWRSENT;
break;
case LPC214X_EP0SETADDRESS:
{
/* If the address was set to a non-zero value, then thiscompletes the
* default phase, and begins the address phase (still not fully configured)
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0INSETADDRESS), (uint16)priv->paddr);
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
priv->ep0state = LPC214X_EP0REQUEST;
case LPC214X_EP0REQUEST:
{
/* Process the next request action (if any) */
lpc214x_wrrequest(&priv->eplist[LPC214X_EP0_IN]);
}
break;
default:
priv->stalled = 1;
break;
}
if (priv->stalled)
{
usbtrace(TRACE_DEVERROR(LPC214X_TRACEERR_EP0INSTALLED), priv->ep0state);
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
ep0 = &priv->eplist[LPC214X_EP0_IN];
lpc214x_epstall(&ep0->ep, FALSE);
lpc214x_epstall(&ep0->ep, FALSE);
}
}
/*******************************************************************************
* Name: lpc214x_usbinterrupt
*
* Description:
* USB interrupt handler
*
*******************************************************************************/
static int lpc214x_usbinterrupt(int irq, FAR void *context)
{
struct lpc214x_usbdev_s *priv = &g_usbdev;
struct lpc214x_ep_s *privep ;
uint32 devintstatus; /* Sampled state of the device interrupt status register */
uint32 epintstatus; /* Sampled state of the endpoint interrupt status register */
#ifdef CONFIG_LPC214X_USBDEV_DMA
uint32 dmaintstatus; /* Sampled state of dma interrupt status register */
#endif
uint32 softprio; /* Current priority interrupt bitset */
uint32 pending; /* Pending subset of priority interrupt bitset */
ubyte epphy; /* Physical endpoint number being processed */
int i;
usbtrace(TRACE_INTENTRY(LPC214X_TRACEINTID_USB), 0);
/* Read the device interrupt status register */
devintstatus = lpc214x_getreg(LPC214X_USBDEV_DEVINTST);
#ifdef CONFIG_LPC214X_USBDEV_DMA
/* Check for low priority and high priority (non-DMA) interrupts */
if ((lpc214x_getreg(LPC214X_USBDEV_INTST) & (USBDEV_INTST_REQLP|USBDEV_INTST_REQHP)) != 0)
{
#endif
#ifdef CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT
/* Fast EP interrupt */
if ((devintstatus & USBDEV_DEVINT_EPFAST) != 0)
{
/* Clear Fast EP interrupt */
lpc214x_putreg(USBDEV_DEVINT_EPFAST, LPC214X_USBDEV_DEVINTCLR);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPFAST), 0);
/* Do what? */
}
#endif
#if CONFIG_DEBUG
/* USB engine error interrupt */
if ((devintstatus & USBDEV_DEVINT_EPRINT))
{
ubyte errcode;
/* Clear the error interrupt */
lpc214x_putreg(USBDEV_DEVINT_EPRINT, LPC214X_USBDEV_DEVINTCLR);
/* And show what error occurred */
errcode = (ubyte)lpc214x_usbcmd(CMD_USB_DEV_READERRORSTATUS, 0) & 0x0f;
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPRINT), (uint16)errcode);
}
#endif
#ifdef CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
/* Frame interrupt */
if ((devintstatus & USBDEV_DEVINT_FRAME) != 0)
{
/* Clear the frame interrupt */
lpc214x_putreg(USBDEV_DEVINT_FRAME, LPC214X_USBDEV_DEVINTCLR);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_FRAME), 0);
/* Then read the start of frame value */
priv->sof = (uint16)lpc214x_usbcmd(CMD_USB_DEV_READFRAMENO, 0);
}
#endif
/* Device Status interrupt */
if ((devintstatus & USBDEV_DEVINT_DEVSTAT) != 0)
{
/* Clear Device status interrupt */
lpc214x_putreg(USBDEV_DEVINT_DEVSTAT, LPC214X_USBDEV_DEVINTCLR);
/* Get device status */
g_usbdev.devstatus = (ubyte)lpc214x_usbcmd(CMD_USB_DEV_GETSTATUS, 0);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DEVSTAT), (uint16)g_usbdev.devstatus);
/* Device connection status */
if (DEVSTATUS_CONNCHG(g_usbdev.devstatus))
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_CONNECTCHG),
(uint16)g_usbdev.devstatus);
if (DEVSTATUS_CONNECT(g_usbdev.devstatus))
{
/* Host is connected */
if (!priv->attached)
{
/* We have a transition from unattached to attached */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_CONNECTED),
(uint16)g_usbdev.devstatus);
priv->usbdev.speed = USB_SPEED_UNKNOWN;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
priv->attached = 1;
}
}
/* Otherwise the host is not attached */
else if (priv->attached)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DISCONNECTED),
(uint16)g_usbdev.devstatus);
priv->usbdev.speed = USB_SPEED_UNKNOWN;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 0);
priv->attached = 0;
priv->paddrset = 0;
}
}
/* Device suspend status */
if (DEVSTATUS_SUSPCHG(g_usbdev.devstatus))
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_SUSPENDCHG),
(uint16)g_usbdev.devstatus);
}
/* Device reset */
if (DEVSTATUS_RESET(g_usbdev.devstatus))
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_DEVRESET),
(uint16)g_usbdev.devstatus);
lpc214x_usbreset(priv);
}
}
/* Slow EP interrupt */
if ((devintstatus & USBDEV_DEVINT_EPSLOW) != 0)
{
/* Clear Slow EP interrupt */
lpc214x_putreg(USBDEV_DEVINT_EPSLOW, LPC214X_USBDEV_DEVINTCLR);
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPSLOW), 0);
do
{
/* Read the endpoint interrupt status register */
epintstatus = lpc214x_getreg(LPC214X_USBDEV_EPINTST);
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
/* Loop twice: Process software high priority interrupts
* on the first pass and low priority interrupts on the
* second.
*/
softprio = priv->softprio;
for (i = 0; i < 2; i++, softprio = ~softprio)
{
/* On the first time through the loop, pending will be
* the bitset of high priority pending interrupts; on the
* second time throught it will be the bitset of low
* priority interrupts.
*/
pending = epintstatus & softprio;
/* EP0 OUT interrupt indicated by bit0 == 1 */
if ((pending & 1) != 0)
{
/* Clear the endpoint interrupt */
uint32 result = lpc214x_epclrinterrupt(LPC214X_CTRLEP_OUT);
if (result & USBDEV_EPSETUPPACKET)
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0SETUP), (uint16)result);
lpc214x_ep0setup(priv);
}
else
{
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0OUT), priv->ep0state);
lpc214x_ep0dataoutinterrupt(priv);
}
break;
}
/* EP0 IN interrupt indicated by bit1 == 1 */
if ((pending & 2) != 0)
{
/* Clear the endpoint interrupt */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EP0IN), priv->ep0state);
(void)lpc214x_epclrinterrupt(LPC214X_CTRLEP_IN);
lpc214x_ep0dataininterrupt(priv);
}
pending >>= 2;
/* All other endpoints EP 1-31 */
for (epphy = 2; pending; epphy++, pending >>= 1)
{
/* Is the endpoint interrupt pending? */
if ((pending & 1) != 0)
{
/* Yes.. clear the endpoint interrupt */
(void)lpc214x_epclrinterrupt(epphy);
/* Get the endpoint sructure corresponding to the physical
* endpoint number.
*/
privep = &priv->eplist[epphy];
/* Check for complete on IN or OUT endpoint. Odd physical
* endpoint addresses are IN endpoints.
*/
if ((epphy & 1) != 0)
{
/* IN: device-to-host */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPOUT), (uint16)epphy);
if (priv->usbdev.speed == USB_SPEED_UNKNOWN)
{
priv->usbdev.speed = USB_SPEED_FULL;
lpc214x_usbcmd(CMD_USB_DEV_CONFIG, 1);
}
/* Write host data from the current write request (if any) */
}
else
{
/* OUT: host-to-device */
usbtrace(TRACE_INTDECODE(LPC214X_TRACEINTID_EPIN), (uint16)epphy);
/* Read host data into the current read request */
{
lpc214x_rdrequest(privep);
}
else
{
uvdbg("Pending interrupt\n");
priv->rxpending = 1;
}
}
}
}
}
}
while (epintstatus);
}
#ifdef CONFIG_LPC214X_USBDEV_DMA
}
Loading
Loading full blame...