Skip to content
Snippets Groups Projects
Commit 22eab59f authored by Gregory Nutt's avatar Gregory Nutt
Browse files

Refresh SAM4E-EK configurations

parent 8e84282c
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
configs/sam4e-ek/README.txt
+ 6
− 13
View file @ 22eab59f
......@@ -1300,7 +1300,7 @@ Configurations
configuration settings above in the section entitled "Networking").
NOTE: In boot-up sequence is very simple in this example; all
initialization is done sequential (vs. in parallel) and so you will
initialization is done sequentially (vs. in parallel) and so you will
not see the NSH prompt until all initialization is complete. The
network bring-up in particular will add some delay before the NSH
prompt appears. In a real application, you would probably want to
......@@ -1309,7 +1309,7 @@ Configurations
This delay will be especially long if the board is not connected to
a network because additional time will be required to fail with
timeout errors.
timeout errors. This delay can be eliminated, however, if you enable an NSH initialization option as described above in a paragraph entitled, "Network Initialization Thread."
STATUS:
2014-3-13: The basic NSH serial console is working. Network support
......@@ -1357,18 +1357,11 @@ Configurations
does not mount on either the Linux or Windows host. This
needs to be retested.
8. This configuration can be used to verify the touchscreen on on the
SAM4E-EK LCD. See the instructions above in the paragraph entitled
"Touchscreen".
STATUS:
2014-3-21: The touchscreen has not yet been tested.
9. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
8. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
slot. Support for the SD slot can be enabled following the
instructions provided above in the paragraph entitled "HSMCI."
11. This configuration has been used for verifying the touchscreen on
9. This configuration has been used for verifying the touchscreen on
on the SAM4E-EK LCD module.
The NSH configuration can be used to verify the ADS7843E touchscreen on
......@@ -1415,7 +1408,7 @@ Configurations
CONFIG_DEBUG_VERBOSE=y : Enable verbose debug output
CONFIG_DEBUG_INPUT=y : Enable debug output from input devices
11. This configuration can be re-configured to test the on-board LCD
10. This configuration can be re-configured to test the on-board LCD
module.
System Type -> AT91SAM3/4 Configuration Options
......@@ -1445,8 +1438,8 @@ Configurations
Graphics Support -> Font Selections
CONFIG_NXFONTS_CHARBITS=7
CONFIG_NXFONT_SANS22X29B=y
CONFIG_NXFONT_SANS23X27=y
CONFIG_NXFONT_SANS22X29B=y
Application Configuration -> Examples
CONFIG_EXAMPLES_NXLINES=y
......
configs/sam4e-ek/nsh/defconfig
+ 175
− 61
View file @ 22eab59f
......@@ -12,10 +12,6 @@ CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
# CONFIG_WINDOWS_CYGWIN is not set
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
......@@ -30,6 +26,7 @@ CONFIG_HOST_LINUX=y
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
# CONFIG_UBOOT_UIMAGE is not set
#
# Customize Header Files
......@@ -109,16 +106,10 @@ CONFIG_ARCH_HAVE_MPU=y
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
CONFIG_ARCH_HAVE_EXTNAND=y
CONFIG_ARCH_HAVE_EXTNOR=y
CONFIG_ARCH_HAVE_EXTSRAM0=y
......@@ -140,6 +131,7 @@ CONFIG_ARCH_HAVE_EXTSRAM1=y
# CONFIG_ARCH_CHIP_ATSAM3X4C is not set
# CONFIG_ARCH_CHIP_ATSAM3A8C is not set
# CONFIG_ARCH_CHIP_ATSAM3A4C is not set
# CONFIG_ARCH_CHIP_ATSAM4CMP16B is not set
# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set
# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set
# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set
......@@ -169,6 +161,7 @@ CONFIG_ARCH_CHIP_ATSAM4E16E=y
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_SAM3X is not set
# CONFIG_ARCH_CHIP_SAM3A is not set
# CONFIG_ARCH_CHIP_SAM4CM is not set
# CONFIG_ARCH_CHIP_SAM4L is not set
CONFIG_ARCH_CHIP_SAM4E=y
# CONFIG_ARCH_CHIP_SAM4S is not set
......@@ -256,6 +249,7 @@ CONFIG_SAM34_EMAC_PHYSR_100HD=0x2
CONFIG_SAM34_EMAC_PHYSR_10FD=0x5
CONFIG_SAM34_EMAC_PHYSR_100FD=0x6
CONFIG_SAM34_EMAC_ISETH0=y
# CONFIG_SAM34_TC is not set
#
# Architecture Options
......@@ -264,11 +258,13 @@ CONFIG_SAM34_EMAC_ISETH0=y
# CONFIG_ARCH_VECNOTIRQ is not set
CONFIG_ARCH_DMA=y
CONFIG_ARCH_HAVE_IRQPRIO=y
# CONFIG_ARCH_L2CACHE is not set
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
# CONFIG_ARCH_HAVE_MMU is not set
# CONFIG_ARCH_NAND_HWECC is not set
# CONFIG_ARCH_HAVE_EXTCLK is not set
# CONFIG_ARCH_IRQPRIO is not set
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
......@@ -337,35 +333,69 @@ CONFIG_SAM4EEK_AT25_FTL=y
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Clocks and Timers
#
CONFIG_USEC_PER_TICK=10000
# CONFIG_SYSTEM_TIME64 is not set
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_CLOCK_MONOTONIC is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2014
CONFIG_START_MONTH=3
CONFIG_START_DAY=10
CONFIG_DEV_CONSOLE=y
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=32
CONFIG_PREALLOC_TIMERS=4
#
# Tasks and Scheduling
#
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_RR_INTERVAL=200
CONFIG_TASK_NAME_SIZE=0
CONFIG_MAX_TASK_ARGS=4
CONFIG_MAX_TASKS=16
# CONFIG_SCHED_HAVE_PARENT is not set
CONFIG_SCHED_WAITPID=y
#
# Pthread Options
#
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
CONFIG_NPTHREAD_KEYS=4
#
# Performance Monitoring
#
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
#
# Files and I/O
#
CONFIG_DEV_CONSOLE=y
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
# CONFIG_PRIORITY_INHERITANCE is not set
#
# RTOS hooks
#
# CONFIG_BOARD_INITIALIZE is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
......@@ -376,19 +406,10 @@ CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
# POSIX Message Queue Options
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=32
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
......@@ -405,6 +426,12 @@ CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
#
# Buffering
#
# CONFIG_DRVR_WRITEBUFFER is not set
# CONFIG_DRVR_READAHEAD is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
......@@ -419,6 +446,7 @@ CONFIG_SPI_EXCHANGE=y
# CONFIG_I2S is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_TIMER is not set
# CONFIG_ANALOG is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_VIDEO_DEVICES is not set
......@@ -435,7 +463,6 @@ CONFIG_MTD=y
# CONFIG_MTD_SECT512 is not set
# CONFIG_MTD_BYTE_WRITE is not set
# CONFIG_MTD_CONFIG is not set
# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
#
# MTD Device Drivers
......@@ -474,10 +501,12 @@ CONFIG_NETDEVICES=y
#
# External Ethernet PHY Device Support
#
# CONFIG_ARCH_PHY_INTERRUPT is not set
# CONFIG_ETH0_PHY_NONE is not set
# CONFIG_ETH0_PHY_AM79C874 is not set
# CONFIG_ETH0_PHY_KS8721 is not set
CONFIG_ETH0_PHY_KSZ8051=y
# CONFIG_ETH0_PHY_KSZ8081 is not set
# CONFIG_ETH0_PHY_KSZ90x1 is not set
# CONFIG_ETH0_PHY_DP83848C is not set
# CONFIG_ETH0_PHY_LAN8720 is not set
......@@ -569,17 +598,33 @@ CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
# CONFIG_NET_MULTIBUFFER is not set
# CONFIG_NET_PROMISCUOUS is not set
CONFIG_NET_BUFSIZE=562
CONFIG_NET_RECEIVE_WINDOW=536
CONFIG_NET_GUARDSIZE=2
#
# Socket Support
#
CONFIG_NSOCKET_DESCRIPTORS=8
CONFIG_NET_NACTIVESOCKETS=16
CONFIG_NET_SOCKOPTS=y
# CONFIG_NET_SOLINGER is not set
CONFIG_NET_BUFSIZE=562
# CONFIG_NET_TCPURGDATA is not set
#
# Network Device Operations
#
# CONFIG_NETDEV_PHY_IOCTL is not set
#
# Raw Socket Support
#
# CONFIG_NET_PKT is not set
#
# TCP/IP Networking
#
CONFIG_NET_TCP=y
# CONFIG_NET_TCPURGDATA is not set
CONFIG_NET_TCP_CONNS=16
CONFIG_NET_MAX_LISTENPORTS=16
CONFIG_NET_TCP_READAHEAD=y
......@@ -597,20 +642,48 @@ CONFIG_NET_UDP_CHECKSUMS=y
CONFIG_NET_UDP_CONNS=8
CONFIG_NET_BROADCAST=y
# CONFIG_NET_RXAVAIL is not set
#
# ICMP Networking Support
#
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_PING=y
# CONFIG_NET_PINGADDRCONF is not set
#
# IGMPv2 Client Support
#
# CONFIG_NET_IGMP is not set
# CONFIG_NET_STATISTICS is not set
CONFIG_NET_RECEIVE_WINDOW=536
#
# ARP Configuration
#
CONFIG_NET_ARP=y
CONFIG_NET_ARPTAB_SIZE=16
CONFIG_NET_ARP_MAXAGE=120
# CONFIG_NET_ARP_IPIN is not set
#
# Network I/O Buffer Support
#
CONFIG_NET_IOB=y
CONFIG_IOB_NBUFFERS=24
CONFIG_IOB_BUFSIZE=196
CONFIG_IOB_NCHAINS=8
CONFIG_IOB_THROTTLE=0
# CONFIG_NET_ARCH_INCR32 is not set
# CONFIG_NET_ARCH_CHKSUM is not set
# CONFIG_NET_STATISTICS is not set
#
# Routing Table Configuration
#
# CONFIG_NET_ROUTE is not set
CONFIG_NET_ETHERNET=y
#
# Crypto API
#
# CONFIG_CRYPTO is not set
#
# File Systems
......@@ -620,6 +693,7 @@ CONFIG_IOB_THROTTLE=0
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_AUTOMOUNTER is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
CONFIG_FS_READABLE=y
CONFIG_FS_WRITABLE=y
......@@ -698,6 +772,7 @@ CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
# CONFIG_LIBC_LOCALTIME is not set
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
......@@ -730,6 +805,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CONFIGDATA is not set
# CONFIG_EXAMPLES_CPUHOG is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
......@@ -740,7 +816,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
......@@ -757,13 +832,14 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERIALBLASTER is not set
# CONFIG_EXAMPLES_SERIALRX is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
......@@ -815,6 +891,7 @@ CONFIG_NETUTILS_NETLIB=y
CONFIG_NETUTILS_WEBCLIENT=y
CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
# CONFIG_NETUTILS_WEBSERVER is not set
# CONFIG_NETUTILS_NTPCLIENT is not set
# CONFIG_NETUTILS_DISCOVER is not set
# CONFIG_NETUTILS_XMLRPC is not set
......@@ -827,8 +904,20 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
# NSH Library
#
CONFIG_NSH_LIBRARY=y
#
# Command Line Configuration
#
CONFIG_NSH_READLINE=y
# CONFIG_NSH_CLE is not set
CONFIG_NSH_LINELEN=64
# CONFIG_NSH_DISABLE_SEMICOLON is not set
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_TMPDIR="/tmp"
CONFIG_NSH_MAXARGUMENTS=6
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_BUILTIN_APPS=y
#
......@@ -884,24 +973,37 @@ CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_CMDOPT_HEXDUMP=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
# CONFIG_NSH_DISABLE_SEMICOLON is not set
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_TMPDIR="/tmp"
CONFIG_NSH_MAXARGUMENTS=6
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_NESTDEPTH=3
#
# Scripting Support
#
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
# Console Configuration
#
# CONFIG_NSH_ALTCONDEV is not set
CONFIG_NSH_CONSOLE=y
CONFIG_NSH_ARCHINIT=y
#
# Networking Configuration
#
# CONFIG_NSH_NETINIT_THREAD is not set
CONFIG_NSH_IPADDR=0x0a000002
CONFIG_NSH_DRIPADDR=0x0a000001
CONFIG_NSH_NETMASK=0xffffff00
# CONFIG_NSH_DNS is not set
CONFIG_NSH_NOMAC=y
CONFIG_NSH_SWMAC=y
# CONFIG_NSH_ARCHMAC is not set
CONFIG_NSH_MACADDR=0x00e0deadbeef
CONFIG_NSH_MAX_ROUNDTRIP=20
#
# Telnet Configuration
#
CONFIG_NSH_TELNET=y
CONFIG_NSH_TELNETD_PORT=23
CONFIG_NSH_TELNETD_DAEMONPRIO=100
......@@ -910,12 +1012,6 @@ CONFIG_NSH_TELNETD_CLIENTPRIO=100
CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
CONFIG_NSH_IOBUFFER_SIZE=512
# CONFIG_NSH_TELNET_LOGIN is not set
CONFIG_NSH_IPADDR=0x0a000002
CONFIG_NSH_DRIPADDR=0x0a000001
CONFIG_NSH_NETMASK=0xffffff00
# CONFIG_NSH_DNS is not set
CONFIG_NSH_NOMAC=y
CONFIG_NSH_MAX_ROUNDTRIP=20
#
# NxWidgets/NxWM
......@@ -950,6 +1046,11 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
#
# CONFIG_SYSTEM_FLASH_ERASEALL is not set
#
# Intel HEX to binary conversion
#
# CONFIG_SYSTEM_HEX2BIN is not set
#
# I2C tool
#
......@@ -975,6 +1076,14 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# P-Code Support
#
#
# PHY Tool
#
#
# Power Off
#
......@@ -990,6 +1099,11 @@ CONFIG_READLINE_ECHO=y
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sudoku
#
# CONFIG_SYSTEM_SUDOKU is not set
#
# Sysinfo
#
......
configs/sam4e-ek/nsh/setenv.sh
+ 1
− 0
View file @ 22eab59f
......@@ -52,6 +52,7 @@ fi
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
......
configs/sam4e-ek/usbnsh/defconfig
+ 175
− 65
View file @ 22eab59f
......@@ -12,10 +12,6 @@ CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
# CONFIG_WINDOWS_CYGWIN is not set
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
......@@ -30,6 +26,7 @@ CONFIG_HOST_LINUX=y
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
# CONFIG_UBOOT_UIMAGE is not set
#
# Customize Header Files
......@@ -109,16 +106,10 @@ CONFIG_ARCH_HAVE_MPU=y
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_ARMV7M_OABI_TOOLCHAIN is not set
CONFIG_ARCH_HAVE_EXTNAND=y
CONFIG_ARCH_HAVE_EXTNOR=y
......@@ -141,6 +132,7 @@ CONFIG_ARCH_HAVE_EXTSRAM1=y
# CONFIG_ARCH_CHIP_ATSAM3X4C is not set
# CONFIG_ARCH_CHIP_ATSAM3A8C is not set
# CONFIG_ARCH_CHIP_ATSAM3A4C is not set
# CONFIG_ARCH_CHIP_ATSAM4CMP16B is not set
# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set
# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set
# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set
......@@ -170,6 +162,7 @@ CONFIG_ARCH_CHIP_ATSAM4E16E=y
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_SAM3X is not set
# CONFIG_ARCH_CHIP_SAM3A is not set
# CONFIG_ARCH_CHIP_SAM4CM is not set
# CONFIG_ARCH_CHIP_SAM4L is not set
CONFIG_ARCH_CHIP_SAM4E=y
# CONFIG_ARCH_CHIP_SAM4S is not set
......@@ -261,6 +254,7 @@ CONFIG_SAM34_EMAC_ISETH0=y
#
# AT91SAM3/4 USB Full Speed Device Controller driver (DCD) options
#
# CONFIG_SAM34_TC is not set
#
# Architecture Options
......@@ -269,11 +263,13 @@ CONFIG_SAM34_EMAC_ISETH0=y
# CONFIG_ARCH_VECNOTIRQ is not set
CONFIG_ARCH_DMA=y
CONFIG_ARCH_HAVE_IRQPRIO=y
# CONFIG_ARCH_L2CACHE is not set
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
# CONFIG_ARCH_HAVE_MMU is not set
# CONFIG_ARCH_NAND_HWECC is not set
# CONFIG_ARCH_HAVE_EXTCLK is not set
# CONFIG_ARCH_IRQPRIO is not set
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
......@@ -342,35 +338,69 @@ CONFIG_SAM4EEK_AT25_FTL=y
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Clocks and Timers
#
CONFIG_USEC_PER_TICK=10000
# CONFIG_SYSTEM_TIME64 is not set
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_CLOCK_MONOTONIC is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2014
CONFIG_START_MONTH=3
CONFIG_START_DAY=22
# CONFIG_DEV_CONSOLE is not set
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=32
CONFIG_PREALLOC_TIMERS=4
#
# Tasks and Scheduling
#
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_RR_INTERVAL=200
CONFIG_TASK_NAME_SIZE=0
CONFIG_MAX_TASK_ARGS=4
CONFIG_MAX_TASKS=16
# CONFIG_SCHED_HAVE_PARENT is not set
CONFIG_SCHED_WAITPID=y
#
# Pthread Options
#
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
CONFIG_NPTHREAD_KEYS=4
#
# Performance Monitoring
#
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
#
# Files and I/O
#
# CONFIG_DEV_CONSOLE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
# CONFIG_PRIORITY_INHERITANCE is not set
#
# RTOS hooks
#
# CONFIG_BOARD_INITIALIZE is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
......@@ -381,19 +411,10 @@ CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
# POSIX Message Queue Options
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=32
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
......@@ -410,6 +431,12 @@ CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
#
# Buffering
#
# CONFIG_DRVR_WRITEBUFFER is not set
# CONFIG_DRVR_READAHEAD is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
......@@ -424,6 +451,7 @@ CONFIG_SPI_EXCHANGE=y
# CONFIG_I2S is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_TIMER is not set
# CONFIG_ANALOG is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_VIDEO_DEVICES is not set
......@@ -440,7 +468,6 @@ CONFIG_MTD=y
# CONFIG_MTD_SECT512 is not set
# CONFIG_MTD_BYTE_WRITE is not set
# CONFIG_MTD_CONFIG is not set
# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
#
# MTD Device Drivers
......@@ -479,10 +506,12 @@ CONFIG_NETDEVICES=y
#
# External Ethernet PHY Device Support
#
# CONFIG_ARCH_PHY_INTERRUPT is not set
# CONFIG_ETH0_PHY_NONE is not set
# CONFIG_ETH0_PHY_AM79C874 is not set
# CONFIG_ETH0_PHY_KS8721 is not set
CONFIG_ETH0_PHY_KSZ8051=y
# CONFIG_ETH0_PHY_KSZ8081 is not set
# CONFIG_ETH0_PHY_KSZ90x1 is not set
# CONFIG_ETH0_PHY_DP83848C is not set
# CONFIG_ETH0_PHY_LAN8720 is not set
......@@ -493,7 +522,6 @@ CONFIG_ETH0_PHY_KSZ8051=y
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
# CONFIG_16550_UART is not set
# CONFIG_ARCH_HAVE_UART is not set
......@@ -524,9 +552,6 @@ CONFIG_ARCH_HAVE_USART1=y
CONFIG_USART1_ISUART=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
# CONFIG_UART0_SERIAL_CONSOLE is not set
# CONFIG_USART1_SERIAL_CONSOLE is not set
CONFIG_NO_SERIAL_CONSOLE=y
#
# UART0 Configuration
......@@ -615,17 +640,33 @@ CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
# CONFIG_NET_MULTIBUFFER is not set
# CONFIG_NET_PROMISCUOUS is not set
CONFIG_NET_BUFSIZE=562
CONFIG_NET_RECEIVE_WINDOW=536
CONFIG_NET_GUARDSIZE=2
#
# Socket Support
#
CONFIG_NSOCKET_DESCRIPTORS=8
CONFIG_NET_NACTIVESOCKETS=16
CONFIG_NET_SOCKOPTS=y
# CONFIG_NET_SOLINGER is not set
CONFIG_NET_BUFSIZE=562
# CONFIG_NET_TCPURGDATA is not set
#
# Network Device Operations
#
# CONFIG_NETDEV_PHY_IOCTL is not set
#
# Raw Socket Support
#
# CONFIG_NET_PKT is not set
#
# TCP/IP Networking
#
CONFIG_NET_TCP=y
# CONFIG_NET_TCPURGDATA is not set
CONFIG_NET_TCP_CONNS=16
CONFIG_NET_MAX_LISTENPORTS=16
CONFIG_NET_TCP_READAHEAD=y
......@@ -643,20 +684,48 @@ CONFIG_NET_UDP_CHECKSUMS=y
CONFIG_NET_UDP_CONNS=8
CONFIG_NET_BROADCAST=y
# CONFIG_NET_RXAVAIL is not set
#
# ICMP Networking Support
#
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_PING=y
# CONFIG_NET_PINGADDRCONF is not set
#
# IGMPv2 Client Support
#
# CONFIG_NET_IGMP is not set
# CONFIG_NET_STATISTICS is not set
CONFIG_NET_RECEIVE_WINDOW=536
#
# ARP Configuration
#
CONFIG_NET_ARP=y
CONFIG_NET_ARPTAB_SIZE=16
CONFIG_NET_ARP_MAXAGE=120
# CONFIG_NET_ARP_IPIN is not set
#
# Network I/O Buffer Support
#
CONFIG_NET_IOB=y
CONFIG_IOB_NBUFFERS=24
CONFIG_IOB_BUFSIZE=196
CONFIG_IOB_NCHAINS=8
CONFIG_IOB_THROTTLE=0
# CONFIG_NET_ARCH_INCR32 is not set
# CONFIG_NET_ARCH_CHKSUM is not set
# CONFIG_NET_STATISTICS is not set
#
# Routing Table Configuration
#
# CONFIG_NET_ROUTE is not set
CONFIG_NET_ETHERNET=y
#
# Crypto API
#
# CONFIG_CRYPTO is not set
#
# File Systems
......@@ -666,6 +735,7 @@ CONFIG_IOB_THROTTLE=0
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_AUTOMOUNTER is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
CONFIG_FS_READABLE=y
CONFIG_FS_WRITABLE=y
......@@ -746,6 +816,7 @@ CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
# CONFIG_LIBC_LOCALTIME is not set
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
......@@ -778,6 +849,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CONFIGDATA is not set
# CONFIG_EXAMPLES_CPUHOG is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
......@@ -788,7 +860,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
......@@ -805,13 +876,14 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERIALBLASTER is not set
# CONFIG_EXAMPLES_SERIALRX is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
......@@ -863,6 +935,7 @@ CONFIG_NETUTILS_NETLIB=y
CONFIG_NETUTILS_WEBCLIENT=y
CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
# CONFIG_NETUTILS_WEBSERVER is not set
# CONFIG_NETUTILS_NTPCLIENT is not set
# CONFIG_NETUTILS_DISCOVER is not set
# CONFIG_NETUTILS_XMLRPC is not set
......@@ -875,8 +948,20 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
# NSH Library
#
CONFIG_NSH_LIBRARY=y
#
# Command Line Configuration
#
CONFIG_NSH_READLINE=y
# CONFIG_NSH_CLE is not set
CONFIG_NSH_LINELEN=64
# CONFIG_NSH_DISABLE_SEMICOLON is not set
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_TMPDIR="/tmp"
CONFIG_NSH_MAXARGUMENTS=6
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_BUILTIN_APPS=y
#
......@@ -932,25 +1017,38 @@ CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_CMDOPT_HEXDUMP=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
# CONFIG_NSH_DISABLE_SEMICOLON is not set
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_TMPDIR="/tmp"
CONFIG_NSH_MAXARGUMENTS=6
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_NESTDEPTH=3
#
# Scripting Support
#
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLEBG is not set
#
# Console Configuration
#
CONFIG_NSH_CONSOLE=y
# CONFIG_NSH_USBCONSOLE is not set
CONFIG_NSH_ARCHINIT=y
#
# USB Trace Support
# Networking Configuration
#
# CONFIG_NSH_NETINIT_THREAD is not set
CONFIG_NSH_IPADDR=0x0a000002
CONFIG_NSH_DRIPADDR=0x0a000001
CONFIG_NSH_NETMASK=0xffffff00
# CONFIG_NSH_DNS is not set
CONFIG_NSH_NOMAC=y
CONFIG_NSH_SWMAC=y
# CONFIG_NSH_ARCHMAC is not set
CONFIG_NSH_MACADDR=0x00e0deadbeef
CONFIG_NSH_MAX_ROUNDTRIP=20
#
# Telnet Configuration
#
# CONFIG_NSH_ALTCONDEV is not set
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_TELNET=y
CONFIG_NSH_TELNETD_PORT=23
CONFIG_NSH_TELNETD_DAEMONPRIO=100
......@@ -959,12 +1057,6 @@ CONFIG_NSH_TELNETD_CLIENTPRIO=100
CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
CONFIG_NSH_IOBUFFER_SIZE=512
# CONFIG_NSH_TELNET_LOGIN is not set
CONFIG_NSH_IPADDR=0x0a000002
CONFIG_NSH_DRIPADDR=0x0a000001
CONFIG_NSH_NETMASK=0xffffff00
# CONFIG_NSH_DNS is not set
CONFIG_NSH_NOMAC=y
CONFIG_NSH_MAX_ROUNDTRIP=20
#
# NxWidgets/NxWM
......@@ -999,6 +1091,11 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
#
# CONFIG_SYSTEM_FLASH_ERASEALL is not set
#
# Intel HEX to binary conversion
#
# CONFIG_SYSTEM_HEX2BIN is not set
#
# I2C tool
#
......@@ -1024,6 +1121,14 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# P-Code Support
#
#
# PHY Tool
#
#
# Power Off
#
......@@ -1039,6 +1144,11 @@ CONFIG_READLINE_ECHO=y
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sudoku
#
# CONFIG_SYSTEM_SUDOKU is not set
#
# Sysinfo
#
......
configs/sam4e-ek/usbnsh/setenv.sh
+ 1
− 0
View file @ 22eab59f
......@@ -52,6 +52,7 @@ fi
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment