In LPC1788 24-bit color mode, we need to tell NX that the resolution if 32...

In LPC1788 24-bit color mode, we need to tell NX that the resolution if 32 bpp; Add interfaces to control Open1788 backlight

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5798 42af7a65-404d-4744-a932-0658087f49c3

arch/Kconfig

@@ -103,7 +103,7 @@ source arch/x86/Kconfig
 source arch/z16/Kconfig
 source arch/z80/Kconfig
 
-comment "External Memory Configuration"
+menu "External Memory Configuration"
 
 config ARCH_HAVE_EXTNAND
 	bool
@@ -243,6 +243,7 @@ config ARCH_EXTSRAM1HEAP
 		Add external SRAM Bank 1 into the heap.
 
 endif
+endmenu
 
 comment "Architecture Options"
 

arch/arm/src/lpc17xx/Kconfig

@@ -639,6 +639,19 @@ config LPC17_LCD_REFRESH_FREQ
 	---help---
 		LCD refesh rate (Hz)
 
+config LPC17_LCD_BACKLIGHT
+	bool "Enable backlight"
+	default y
+	---help---
+		Enable backlight support.  If LPC17_LCD_BACKLIGHT is selected, then
+		the board-specific logic must provide this lpc17_backlight()
+		interface so that the LCD driver can turn the backlight on and off
+		as necessary.  You should select this option and implement
+		lpc17_backlight() if your board provides GPIO control over the
+		backlight.  This interface provides only ON/OFF control of the
+		backlight.  If you want finer control over the backlight level (for
+		example, using PWM), then this interface would need to be extended.
+
 config LPC17_LCD_TFTPANEL
 	bool "TFT Panel"
 	default y

arch/arm/src/lpc17xx/lpc17_lcd.c

@@ -523,9 +523,7 @@ int up_fbinitialize(void)
 
   /* Turn on LCD clock */
 
-  regval  = getreg32(LPC17_SYSCON_PCONP);
-  regval |= SYSCON_PCONP_PCLCD;
-  putreg32(regval, LPC17_SYSCON_PCONP);
+  modifyreg32(LPC17_SYSCON_PCONP, 0, SYSCON_PCONP_PCLCD);
 
   /* Disable the cursor */
 
@@ -699,6 +697,11 @@ int up_fbinitialize(void)
   regval |= LCD_CTRL_LCDPWR;
   putreg32(regval, LPC17_LCD_CTRL);
 
+#ifdef CONFIG_LPC17_LCD_BACKLIGHT
+  /* Turn on the back light */
+
+  lpc17_backlight(true);
+#endif
   return OK;
 }
 
@@ -740,7 +743,33 @@ FAR struct fb_vtable_s *up_fbgetvplane(int vplane)
 
 void fb_uninitialize(void)
 {
-  gdbg("Not implemented!\n");
+  uint32_t regval;
+  int i;
+
+  /* We assume there is only one use of the LCD and so we do not need to
+   * worry about mutually exclusive access to the LCD hardware.
+   */
+
+#ifdef CONFIG_LPC17_LCD_BACKLIGHT
+  /* Turn off the back light */
+
+  lpc17_backlight(false);
+#endif
+
+  /* Disable the LCD controller */
+
+  regval = getreg32(LPC17_LCD_CTRL);
+  regval &= ~LCD_CTRL_LCDPWR;
+  putreg32(regval, LPC17_LCD_CTRL);
+
+  for (i = LPC17_LCD_PWRDIS_DELAY; i; i--);
+
+  regval &= ~LCD_CTRL_LCDEN;
+  putreg32(regval, LPC17_LCD_CTRL);
+
+  /* Turn off clocking to the LCD. modifyreg32() can do this atomically. */
+
+  modifyreg32(LPC17_SYSCON_PCONP, SYSCON_PCONP_PCLCD, 0);
   return OK;
 }
 

arch/arm/src/lpc17xx/lpc17_lcd.h

@@ -41,6 +41,9 @@
  ************************************************************************************/
 
 #include <nuttx/config.h>
+
+#include <stdbool.h>
+
 #include <nuttx/nx/nxglib.h>
 
 #include "chip/lpc17_lcd.h"
@@ -81,7 +84,7 @@
 #  define LPC17_BPP                    16
 #  define LPC17_COLOR_FMT              FB_FMT_Y16
 #elif defined(CONFIG_LPC17_LCD_BPP24)
-#  define LPC17_BPP                    24
+#  define LPC17_BPP                    32  /* Only 24 of 32 bits used for RGB */
 #  define LPC17_COLOR_FMT              FB_FMT_RGB24
 #  ifndef CONFIG_LPC17_LCD_TFTPANEL
 #    error "24 BPP is only available for a TFT panel"
@@ -164,7 +167,7 @@
  */
 
 /************************************************************************************
- * Name:  lpc17_lcdclear
+ * Name: lpc17_lcdclear
  *
  * Description:
  *   This is a non-standard LCD interface just for the LPC17xx.  Clearing the display
@@ -176,4 +179,17 @@
 
 void lpc17_lcdclear(nxgl_mxpixel_t color);
 
+/************************************************************************************
+ * Name: lpc17_backlight
+ *
+ * Description:
+ *   If CONFIG_LPC17_LCD_BACKLIGHT is defined, then the board-specific logic must
+ *   provide this interface to turn the backlight on and off.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LPC17_LCD_BACKLIGHT
+void lpc17_backlight(bool blon);
+#endif
+
 #endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_LCD_H */

configs/open1788/nxlines/defconfig

@@ -182,6 +182,7 @@ CONFIG_SDIO_DMAPRIO=0x0
 #
 CONFIG_LPC17_LCD_VRAMBASE=0xa0010000
 CONFIG_LPC17_LCD_REFRESH_FREQ=50
+CONFIG_LPC17_LCD_BACKLIGHT=y
 CONFIG_LPC17_LCD_TFTPANEL=y
 # CONFIG_LPC17_LCD_BPP1 is not set
 # CONFIG_LPC17_LCD_BPP2 is not set
@@ -444,8 +445,8 @@ CONFIG_NX_DISABLE_2BPP=y
 CONFIG_NX_DISABLE_4BPP=y
 CONFIG_NX_DISABLE_8BPP=y
 CONFIG_NX_DISABLE_16BPP=y
-# CONFIG_NX_DISABLE_24BPP is not set
-CONFIG_NX_DISABLE_32BPP=y
+CONFIG_NX_DISABLE_24BPP=y
+# CONFIG_NX_DISABLE_32BPP is not set
 CONFIG_NX_PACKEDMSFIRST=y
 
 #
@@ -602,7 +603,7 @@ CONFIG_EXAMPLES_NXLINES_LINECOLOR=0x00ffff00
 CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=16
 CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0x00ffff00
 CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0x00f5f5dc
-CONFIG_EXAMPLES_NXLINES_BPP=24
+CONFIG_EXAMPLES_NXLINES_BPP=32
 # CONFIG_EXAMPLES_NXLINES_EXTERNINIT is not set
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set

configs/open1788/src/Makefile

@@ -52,6 +52,10 @@ ifeq ($(CONFIG_ARCH_EXTDRAM),y)
   CSRCS += lpc17_sdraminitialize.c
 endif
 
+ifeq ($(CONFIG_LPC17_LCD),y)
+  CSRCS += lpc17_lcd.c
+endif
+
 ifeq ($(CONFIG_NSH_LIBRARY),y)
   CSRCS += lpc17_nsh.c
 endif

configs/open1788/src/lpc17_boardinitialize.c

@@ -48,7 +48,6 @@
 #include "up_internal.h"
 
 #include "lpc17_emc.h"
-#include "lpc17_gpio.h"
 
 #include "open1788.h"
 
@@ -108,12 +107,10 @@ void lpc17_boardinitialize(void)
   up_ledinit();
 #endif
 
-  /* Enable the LCD backlight (unless we can defer this to a later
-   * initialization phase.
-   */
+  /* Configure the LCD GPIOs if LCD support has been selected. */
 
-#if defined(CONFIG_LPC17_LCD) && !defined(CONFIG_BOARD_INITIALIZE)
-  lpc17_configgpio(GPIO_LCD_BL);
+#ifdef CONFIG_LPC17_LCD
+  lpc17_lcdinitialize();
 #endif
 }
 
@@ -133,12 +130,6 @@ void lpc17_boardinitialize(void)
 #ifdef CONFIG_BOARD_INITIALIZE
 void board_initialize(void)
 {
-  /* Enable the LCD backlight */
-
-#ifdef CONFIG_LPC17_LCD
-  lpc17_configgpio(GPIO_LCD_BL);
-#endif
-
   /* Perform NSH initialization here instead of from the NSH.  This
    * alternative NSH initialization is necessary when NSH is ran in user-space
    * but the initialization function must run in kernel space.

configs/open1788/src/lpc17_lcd.c

+/************************************************************************************
+ * configs/open1788/src/lpc17_lcd.c
+ * arch/arm/src/board/lpc17_lcd.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <debug.h>
+
+#include "lpc17_lcd.h"
+#include "lpc17_gpio.h"
+
+#include "open1788.h"
+
+#ifdef CONFIG_LPC17_LCD
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_lcdinitialize
+ *
+ * Description:
+ *   Initialize the LCD.  Setup backlight (initially off)
+ *
+ ************************************************************************************/
+
+void lpc17_lcdinitialize(void)
+{
+  /* Configure the LCD backlight (and turn the backlight off) */
+
+  lpc17_configgpio(GPIO_LCD_BL);
+}
+
+/************************************************************************************
+ * Name: lpc17_backlight
+ *
+ * Description:
+ *   If CONFIG_LPC17_LCD_BACKLIGHT is defined, then the board-specific logic must
+ *   provide this interface to turn the backlight on and off.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LPC17_LCD_BACKLIGHT
+void lpc17_backlight(bool blon)
+{
+  lpc17_gpiowrite(GPIO_LCD_BL, blon);
+}
+#endif
+
+#endif /* CONFIG_LPC17_LCD */

configs/open1788/src/open1788.h

@@ -112,9 +112,9 @@
 #define GPIO_SD_CD   (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN13)
 
 /* LCD ******************************************************************************/
-/* Backlight enable, P2[1].  Initial state is ON */
+/* Backlight enable, P2[1].  Initial state is OFF (zero) */
 
-#define GPIO_LCD_BL  (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN1)
+#define GPIO_LCD_BL  (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN1)
 
 /************************************************************************************
  * Public Types
@@ -178,7 +178,19 @@ void lpc17_nand_initialize(void);
 #endif
 #endif /* CONFIG_LPC17_EMC */
 
-/****************************************************************************
+/************************************************************************************
+ * Name: lpc17_lcdinitialize
+ *
+ * Description:
+ *   Initialize the LCD.  Setup backlight (initially off)
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LPC17_LCD
+void lpc17_lcdinitialize(void);
+#endif
+
+/************************************************************************************
  * Name: nsh_archinitialize
  *
  * Description:
@@ -191,7 +203,7 @@ void lpc17_nand_initialize(void);
  *   CONFIG_NSH_ARCHINIT=n:
  *     Called from board_initialize().
  *
- ****************************************************************************/
+ ************************************************************************************/
 
 #ifdef CONFIG_NSH_LIBRARY
 int nsh_archinitialize(void);
@@ -199,4 +211,3 @@ int nsh_archinitialize(void);
 
 #endif /* __ASSEMBLY__ */
 #endif /* _CONFIGS_OPEN1788_SRC_OPEN1788_H */
-

graphics/README.txt

@@ -363,7 +363,7 @@ CONFIG_NXCONSOLE_CACHESIZE
   a lot of data or scrolling), then increasing the value of CONFIG_NXCONSOLE_CACHESIZE
   is something that you should try.  Alternatively, you can reduce the size of
   CONFIG_MQ_MAXMSGSIZE which will force NxConsole task to pace the server task.
-  CONFIG_NXCONSOLE_CACHESIZE should be larger than ONFIG_MQ_MAXMSGSIZE in any event.
+  CONFIG_NXCONSOLE_CACHESIZE should be larger than CONFIG_MQ_MAXMSGSIZE in any event.
 CONFIG_NXCONSOLE_LINESEPARATION
   This the space (in rows) between each row of test.  Default: 0
 CONFIG_NXCONSOLE_NOWRAP