Skip to content
Snippets Groups Projects
Commit ee1d8415 authored by patacongo's avatar patacongo
Browse files

Adding context switching logic 

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@561 42af7a65-404d-4744-a932-0658087f49c3
parent bf27d79c
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
TODO
+ 7
− 0
View file @ ee1d8415
......@@ -21,6 +21,7 @@ NuttX TODO List (Last updated January 6, 2008)
(2) ARM/LPC214x (arch/arm/src/lpc214x/)
(4) pjrc-8052 / MCS51 (arch/pjrc-8051/)
(2) z80 (arch/z80/)
(1) z16 (arch/z16/)
o Task/Scheduler (sched/)
^^^^^^^^^^^^^^^^^^^^^^^
......@@ -350,4 +351,10 @@ o z80 (arch/z80)
to solve the problem are complex.
o z16 (arch/z16)
^^^^^^^^^^^^^^^^
Description: ZDS-II Librarian complains that the source for the .obj file
is not in the library.
Status: Open
Priority: Low, thought to be cosmetic.
arch/z16/src/z16f/Make.defs
+ 1
− 1
View file @ ee1d8415
......@@ -43,6 +43,6 @@ CMN_CSRCS = up_allocateheap.c up_initialize.c up_schedulesigaction.c \
up_unblocktask.c up_doirq.c up_releasepending.c up_usestack.c \
up_exit.c up_releasestack.c up_idle.c up_reprioritizertr.c
CHIP_SSRCS = z16f_lowuart.S
CHIP_SSRCS = z16f_lowuart.S z16f_saveusercontext.S
CHIP_CSRCS = z16f_clkinit.c z16f_irq.c z16f_timerisr.c z16f_serial.c
arch/z16/src/z16f/chip.h
+ 29
− 29
View file @ ee1d8415
......@@ -367,41 +367,41 @@
/* UART0/1 Status 0 Register Bit Definitions ****************************************/
#define Z16F_UARTSTAT0_RDA _HX8(0x80) /* Bit 7: Receive Data Available */
#define Z16F_UARTSTAT0_PE _HX8(0x40) /* Bit 6: Parity Error */
#define Z16F_UARTSTAT0_OE _HX8(0x20) /* Bit 5: Overrun Error */
#define Z16F_UARTSTAT0_FE _HX8(0x10) /* Bit 4: Framing Error */
#define Z16F_UARTSTAT0_BRKD _HX8(0x08) /* Bit 3: Break Detect */
#define Z16F_UARTSTAT0_TDRE _HX8(0x04) /* Bit 2: Transmitter Data Register Empty */
#define Z16F_UARTSTAT0_TXE _HX8(0x02) /* Bit 1: Transmitter Empty */
#define Z16F_UARTSTAT0_CTS _HX8(0x01) /* Bit 0: Clear To Send */
#define Z16F_UARTSTAT0_RDA _HX8(80) /* Bit 7: Receive Data Available */
#define Z16F_UARTSTAT0_PE _HX8(40) /* Bit 6: Parity Error */
#define Z16F_UARTSTAT0_OE _HX8(20) /* Bit 5: Overrun Error */
#define Z16F_UARTSTAT0_FE _HX8(10) /* Bit 4: Framing Error */
#define Z16F_UARTSTAT0_BRKD _HX8(08) /* Bit 3: Break Detect */
#define Z16F_UARTSTAT0_TDRE _HX8(04) /* Bit 2: Transmitter Data Register Empty */
#define Z16F_UARTSTAT0_TXE _HX8(02) /* Bit 1: Transmitter Empty */
#define Z16F_UARTSTAT0_CTS _HX8(01) /* Bit 0: Clear To Send */
/* UART0/1 Control 0/1 Register Bit Definitions *************************************/
#define Z16F_UARTCTL0_TEN _HX8(0x80) /* Bit 7: Transmit Enable */
#define Z16F_UARTCTL0_REN _HX8(0x40) /* Bit 6: Receive Enable */
#define Z16F_UARTCTL0_CTSE _HX8(0x20) /* Bit 5: CTS Enable */
#define Z16F_UARTCTL0_PEN _HX8(0x10) /* Bit 4: Parity Enable */
#define Z16F_UARTCTL0_PSEL _HX8(0x08) /* Bit 3: Odd Parity Select */
#define Z16F_UARTCTL0_SBRK _HX8(0x04) /* Bit 2: Send Break */
#define Z16F_UARTCTL0_STOP _HX8(0x02) /* Bit 1: Stop Bit Select */
#define Z16F_UARTCTL0_LBEN _HX8(0x01) /* Bit 0: Loopback Enable */
#define Z16F_UARTCTL1_MPMD1 _HX8(0x80) /* Bit 7: Multiprocessor Mode (bit1) */
#define Z16F_UARTCTL1_MPEN _HX8(0x40) /* Bit 6: Multiprocessor Enable */
#define Z16F_UARTCTL1_MPMD0 _HX8(0x20) /* Bit 5: Multiprocessor Mode (bit0) */
#define Z16F_UARTCTL1_MPBT _HX8(0x10) /* Bit 4: Multiprocessor Bit Transmit */
#define Z16F_UARTCTL1_DEPOL _HX8(0x08) /* Bit 3: Driver Enable Polarity */
#define Z16F_UARTCTL1_BRGCTL _HX8(0x04) /* Bit 2: Baud Rate Generator Control */
#define Z16F_UARTCTL1_RDAIRQ _HX8(0x02) /* Bit 1: Receive Data Interrupt Enable */
#define Z16F_UARTCTL1_IREN _HX8(0x01) /* Bit 0: Infrared Encoder/Decoder Eanble */
#define Z16F_UARTCTL0_TEN _HX8(80) /* Bit 7: Transmit Enable */
#define Z16F_UARTCTL0_REN _HX8(40) /* Bit 6: Receive Enable */
#define Z16F_UARTCTL0_CTSE _HX8(20) /* Bit 5: CTS Enable */
#define Z16F_UARTCTL0_PEN _HX8(10) /* Bit 4: Parity Enable */
#define Z16F_UARTCTL0_PSEL _HX8(08) /* Bit 3: Odd Parity Select */
#define Z16F_UARTCTL0_SBRK _HX8(04) /* Bit 2: Send Break */
#define Z16F_UARTCTL0_STOP _HX8(02) /* Bit 1: Stop Bit Select */
#define Z16F_UARTCTL0_LBEN _HX8(01) /* Bit 0: Loopback Enable */
#define Z16F_UARTCTL1_MPMD1 _HX8(80) /* Bit 7: Multiprocessor Mode (bit1) */
#define Z16F_UARTCTL1_MPEN _HX8(40) /* Bit 6: Multiprocessor Enable */
#define Z16F_UARTCTL1_MPMD0 _HX8(20) /* Bit 5: Multiprocessor Mode (bit0) */
#define Z16F_UARTCTL1_MPBT _HX8(10) /* Bit 4: Multiprocessor Bit Transmit */
#define Z16F_UARTCTL1_DEPOL _HX8(08) /* Bit 3: Driver Enable Polarity */
#define Z16F_UARTCTL1_BRGCTL _HX8(04) /* Bit 2: Baud Rate Generator Control */
#define Z16F_UARTCTL1_RDAIRQ _HX8(02) /* Bit 1: Receive Data Interrupt Enable */
#define Z16F_UARTCTL1_IREN _HX8(01) /* Bit 0: Infrared Encoder/Decoder Eanble */
/* UART0/1 Mode Status/Select Register Bit Definitions ******************************/
#define Z16F_UARTMDSEL_NORMAL _HX8(0x00) /* Bits 5-7=0: Multiprocessor and Normal Mode */
#define Z16F_UARTMDSEL_FILTER _HX8(0x20) /* Bits 5-7=1: Noise Filter Control/Status */
#define Z16F_UARTMDSEL_LINP _HX8(0x40) /* Bits 5-7=2: LIN protocol Contol/Status */
#define Z16F_UARTMDSEL_HWREV _HX8(0xe0) /* Bits 5-7=7: LIN-UART Hardware Revision */
#define Z16F_UARTMDSEL_NORMAL _HX8(00) /* Bits 5-7=0: Multiprocessor and Normal Mode */
#define Z16F_UARTMDSEL_FILTER _HX8(20) /* Bits 5-7=1: Noise Filter Control/Status */
#define Z16F_UARTMDSEL_LINP _HX8(40) /* Bits 5-7=2: LIN protocol Contol/Status */
#define Z16F_UARTMDSEL_HWREV _HX8(e0) /* Bits 5-7=7: LIN-UART Hardware Revision */
/* Bits 0-4: Mode dependent status */
/* Timer0/1/2 registers *************************************************************/
......
arch/z16/src/z16f/z16f_head.S
+ 264
− 195
View file @ ee1d8415
/**************************************************************************
* arch/z16/src/z16f/z16f_head.S
* Z16F Reset Entry Point
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
/**************************************************************************
* External References / External Definitions
**************************************************************************/
xref _z16f_lowinit:EROM
#if defined(CONFIG_ARCH_LOWPUTC) || defined(CONFIG_ARCH_LOWGETC)
xref _z16f_lowuartinit:EROM
#endif
xref _os_start:EROM
xdef _reset
xdef _sysexc_isr
xdef _timer2_isr
xdef _timer1_isr
xdef _timer0_isr
xdef _uart0rx_isr
xdef _uart0tx_isr
xdef _i2c_isr
xdef _spi_isr
xdef _adc_isr
xdef _p7ad_isr
xdef _p6ad_isr
xdef _p5ad_isr
xdef _p4ad_isr
xdef _p3ad_isr
xdef _p2ad_isr
xdef _p1ad_isr
xdef _p0ad_isr
xdef _pwmtimer_isr
xdef _uart1rx_isr
xdef _uart1tx_isr
xdef _pwmfault_isr
xdef _c3_isr
xdef _c2_isr
xdef _c1_isr
xdef _c0_isr
xdef _common_isr
/**************************************************************************
* Flash Option Byte Setup
**************************************************************************/
define FOPTIONSEG, SPACE=ROM, ORG=0
segment FOPTIONSEG
db %FF
db %FF
db %FF
db %FF
/**************************************************************************
* vectors
**************************************************************************/
vector RESET=_reset
vector SYSEXC=_sysexc_isr
vector TIMER2=_timer2_isr
vector TIMER1=_timer1_isr
vector TIMER0=_timer0_isr
vector UART0_RX=_uart0rx_isr
vector UART0_TX=_uart0tx_isr
vector I2C=_i2c_isr
vector SPI=_spi_isr
vector ADC=_adc_isr
vector P7AD=_p7ad_isr
vector P6AD=_p6ad_isr
vector P5AD=_p5ad_isr
vector P4AD=_p4ad_isr
vector P3AD=_p3ad_isr
vector P2AD=_p2ad_isr
vector P1AD=_p1ad_isr
vector P0AD=_p0ad_isr
vector PWM_TIMER=_pwmtimer_isr
vector UART1_RX=_uart1rx_isr
vector UART1_TX=_uart1tx_isr
vector PWM_FAULT=_pwmfault_isr
vector C3=_c3_isr
vector C2=_c3_isr
vector C1=_c2_isr
vector C0=_c0_isr
/**************************************************************************
* Equates
**************************************************************************/
STACK_TOP equ %FFC000
/**************************************************************************
* Data Allocation
**************************************************************************/
/**************************************************************************
* Code
**************************************************************************/
define CODESEG, SPACE=EROM
segment CODESEG
/**************************************************************************
* Name: _reset
*
* Description:
* Reset entry point
*
**************************************************************************/
_reset:
ld sp, #STACK_TOP /* Set Stack Pointer */
call _z16f_lowinit /* Perform low-level hardware initialization */
#if defined(CONFIG_ARCH_LOWPUTC) || defined(CONFIG_ARCH_LOWGETC)
call _z16f_lowuartinit /* Initialize the UART for debugging */
#endif
call _os_start /* Start the operating system */
_halted: /* _os_start() should not return */
halt
jp _halted
/**************************************************************************
* Name: Interrupt handlers
*
* Description:
* All interrupts will be vectored to the following locations.
*
**************************************************************************/
_sysexc_isr:
_timer2_isr:
_timer1_isr:
_timer0_isr:
_uart0rx_isr:
_uart0tx_isr:
_i2c_isr:
_spi_isr:
_adc_isr:
_p7ad_isr:
_p6ad_isr:
_p5ad_isr:
_p4ad_isr:
_p3ad_isr:
_p2ad_isr:
_p1ad_isr:
_p0ad_isr:
_pwmtimer_isr:
_uart1rx_isr:
_uart1tx_isr:
_pwmfault_isr:
_c3_isr:
_c2_isr:
_c1_isr:
_c0_isr:
_common_isr:
nop
iret
end
/**************************************************************************
* arch/z16/src/z16f/z16f_head.S
* Z16F Reset Entry Point
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************/
/**************************************************************************
* Included Files
**************************************************************************/
#include <nuttx/config.h>
/**************************************************************************
* External References / External Definitions
**************************************************************************/
xref _z16f_lowinit:EROM
#if defined(CONFIG_ARCH_LOWPUTC) || defined(CONFIG_ARCH_LOWGETC)
xref _z16f_lowuartinit:EROM
#endif
xref _os_start:EROM
xdef _reset
xdef _sysexc_isr
xdef _timer2_isr
xdef _timer1_isr
xdef _timer0_isr
xdef _uart0rx_isr
xdef _uart0tx_isr
xdef _i2c_isr
xdef _spi_isr
xdef _adc_isr
xdef _p7ad_isr
xdef _p6ad_isr
xdef _p5ad_isr
xdef _p4ad_isr
xdef _p3ad_isr
xdef _p2ad_isr
xdef _p1ad_isr
xdef _p0ad_isr
xdef _pwmtimer_isr
xdef _uart1rx_isr
xdef _uart1tx_isr
xdef _pwmfault_isr
xdef _c3_isr
xdef _c2_isr
xdef _c1_isr
xdef _c0_isr
xdef _common_isr
xref _low_nearbss:RAM
xref _len_nearbss
xref _low_farbss:ERAM
xref _len_farbss:ERAM
xref _low_neardata:RAM
xref _len_neardata
xref _low_near_romdata:EROM
xref _low_fardata:ERAM
xref _len_fardata:ERAM
xref _low_far_romdata:EROM
xref far_heapbot:ERAM
xref _far_stack:ERAM
xref _near_stack:RAM
/**************************************************************************
* Flash Option Byte Setup
**************************************************************************/
define FOPTIONSEG, SPACE=ROM, ORG=0
segment FOPTIONSEG
db %FF
db %FF
db %FF
db %FF
/**************************************************************************
* vectors
**************************************************************************/
vector RESET=_reset
vector SYSEXC=_sysexc_isr
vector TIMER2=_timer2_isr
vector TIMER1=_timer1_isr
vector TIMER0=_timer0_isr
vector UART0_RX=_uart0rx_isr
vector UART0_TX=_uart0tx_isr
vector I2C=_i2c_isr
vector SPI=_spi_isr
vector ADC=_adc_isr
vector P7AD=_p7ad_isr
vector P6AD=_p6ad_isr
vector P5AD=_p5ad_isr
vector P4AD=_p4ad_isr
vector P3AD=_p3ad_isr
vector P2AD=_p2ad_isr
vector P1AD=_p1ad_isr
vector P0AD=_p0ad_isr
vector PWM_TIMER=_pwmtimer_isr
vector UART1_RX=_uart1rx_isr
vector UART1_TX=_uart1tx_isr
vector PWM_FAULT=_pwmfault_isr
vector C3=_c3_isr
vector C2=_c3_isr
vector C1=_c2_isr
vector C0=_c0_isr
/**************************************************************************
* Equates
**************************************************************************/
/**************************************************************************
* Data Allocation
**************************************************************************/
/**************************************************************************
* Code
**************************************************************************/
define CODESEG, SPACE=EROM
segment CODESEG
/**************************************************************************
* Name: _reset
*
* Description:
* Reset entry point
*
**************************************************************************/
_reset:
/* Initialize the init/idle task stack */
ld sp, #(_near_stack+1) /* Set Stack Pointer to the top of internal RAM */
clr fp
/* Perform VERY early UART initialization so that we can use it here */
#if defined(CONFIG_ARCH_LOWPUTC) || defined(CONFIG_ARCH_LOWGETC)
call _z16f_lowuartinit /* Initialize the UART for debugging */
#endif
/* Initialize the hardware stack overflow register */
#ifdef CONFIG_Z16F_INITSPOV
ld r0, #(_near_stack_bot+1)
ld spov, r0
#endif
/* Clear BSS */
lea r0, _low_nearbss
ld r1, #_len_nearbss+1
jp _reset2
_reset1:
ld.b (r0++), #0
_reset2:
djnz r1, _reset1
lea r0, _low_farbss
ld r1, #_len_farbss+1
jp _reset4
_reset3:
ld.b (r0++), #0
_reset4:
djnz r1, _reset3
/* Copy ROM data into RAM */
lea r0, _low_near_romdata
lea r1, _low_neardata
ld r2, #_len_neardata+1
jp _reset6
_reset5:
ld.b r3, (r0++)
ld.b (r1++), r3
_reset6:
djnz r2, _reset5
lea r0, _low_far_romdata
lea r1, _low_fardata
ld r2, #_len_fardata+1
jp _reset8
_reset7:
ld.b r3, (r0++)
ld.b (r1++), r3
_reset8:
djnz r2, _reset7
/* Perform low-level hardware initialization */
call _z16f_lowinit /* Perform low-level hardware initialization */
/* Start NuttX */
call _os_start /* Start the operating system */
_halted: /* _os_start() should not return */
halt
jp _halted
/**************************************************************************
* Name: Interrupt handlers
*
* Description:
* All interrupts will be vectored to the following locations.
*
**************************************************************************/
_sysexc_isr:
_timer2_isr:
_timer1_isr:
_timer0_isr:
_uart0rx_isr:
_uart0tx_isr:
_i2c_isr:
_spi_isr:
_adc_isr:
_p7ad_isr:
_p6ad_isr:
_p5ad_isr:
_p4ad_isr:
_p3ad_isr:
_p2ad_isr:
_p1ad_isr:
_p0ad_isr:
_pwmtimer_isr:
_uart1rx_isr:
_uart1tx_isr:
_pwmfault_isr:
_c3_isr:
_c2_isr:
_c1_isr:
_c0_isr:
_common_isr:
nop
iret
end
arch/z16/src/z16f/z16f_lowuart.S
+ 234
− 238
View file @ ee1d8415
/*************************************************************************
* arch/z16/src/z16f/z16f_lowuart.asm
* Z16F UART management
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSeqUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*************************************************************************/
/*************************************************************************
* Included Files
*************************************************************************/
#include <nuttx/config.h>
#include "chip/chip.h"
#if defined(CONFIG_ARCH_LOWPUTC) || defined(CONFIG_ARCH_LOWGETC)
/*************************************************************************
* External References / External Definitions
*************************************************************************/
xdef z16f_lowuartinit
xref _SYS_CLK_FREQ:EROM
#ifdef CONFIG_ARCH_LOWPUTC
xdef _z16f_xmitc
xdef _up_lowputc
#endif
#ifdef CONFIG_ARCH_LOWGETC
xdef _up_lowgetc
#endif
/*************************************************************************
* Data Allocation
*************************************************************************/
/*************************************************************************
* Data Allocation
*************************************************************************/
define CODESEG, SPACE=EROM
segment CODESEG
/*************************************************************************
* Code
*************************************************************************/
/*************************************************************************
* Name: z16f_lowuartinit
*
* Description:
* Initialize UART0 or UART1
*
* Parameters:
* None
*
*************************************************************************/
z16f_lowuartinit:
pushmlo <r0, r3> /* Save registers */
/* Calculate and set the baud rate generation register */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
ld r3, #CONFIG_UART0_BAUD /* r3 = baud */
#else
ld r3, #CONFIG_UART1_BAUD /* r3 = baud */
#endif
ld r0, r3 /* r0 = baud */
sll r0, #3 /* r0 = baud * 8 */
add r0, #_SYS_CLK_FREQ /* r3 = freq + baud * 8*/
sll r3, #4 /* r3 = baud * 16 */
udiv r0, r3 /* BRG = (freq + baud * 8)/(baud * 16) */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
ld.w Z16F_UART0_BR, r0 /* Z16F_UART0_BR = BRG */
/* Set the GPIO Alternate Function Register Lo (AFL) register */
ld r0, #%30
or.b Z16F_GPIOA_AFL, r0 /* Z16F_GPIOA_AFL |= %30 */
/* Enable UART receive (REN) and transmit (TEN) */
clr.b Z16F_UART0_CTL1 /* Z16F_UART0_CTL1 = 0 */
ld r0, #(Z16F_UARTCTL0_TEN|Z16F_UARTCTL0_REN)
ld.b Z16F_UART0_CTL0, r0 /* Z16F_UART0_CTL0 = %c0 */
#else
ld.w Z16F_UART1_BR, r0 /* Z16F_UART1_BR = BRG */
/* Set the GPIO Alternate Function Register Lo (AFL) register */
ld r0, #%30
or.b Z16F_GPIOD_AFL, r0 /* Z16F_GPIOD_AFL |= %30 */
/* Enable UART receive (REN) and transmit (TEN) */
clr.b Z16F_UART1_CTL1 /* Z16F_UART1_CTL1 = 0 */
ld r0, #(Z16F_UARTCTL0_TEN|Z16F_UARTCTL0_REN)
ld.b Z16F_UART1_CTL0, r0 /* Z16F_UART1_CTL0 = %c0 */
#endif
popmlo <r0, r3> /* Restore registers */
ret /* Return */
/*************************************************************************
* Name: _z16f_xmitc
*
* Description:
* Send one character on the selected port
*
* Parmeters:
* r1 = character
*
*************************************************************************/
#ifdef CONFIG_ARCH_LOWPUTC
_z16f_xmitc:
pushmlo <r0> /* Save registers */
_z16f_xmitc1:
ld r0, #Z16F_UARTSTAT0_TDRE /* TDRE=Transmitter Data Register Empty */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
tm.b Z16F_UART0_STAT0, r0 /* r0 = Z16F_UART0_STAT0 */
jp eq, _z16f_xmitc1 /* While (!(Z16F_UART0_STAT0 & TDRE)) */
ld.b Z16F_UART0_TXD, r1 /* Z16F_UART0_TXD = r1 (character) */
#else
tm.b Z16F_UART1_STAT0, r0 /* r0 = Z16F_UART0_STAT1 */
jp eq, _z16f_xmitc1 /* While (!(Z16F_UART1_STAT0 & TDRE)) */
ld.b Z16F_UART1_TXD, r1 /* Z16F_UART1_TXD = r1 (character) */
#endif
popmlo <r0> /* Restore registers */
ret /* Return */
#endif
/*************************************************************************
* Name: _up_lowputc
*
* Description:
* Send one character to the selected serial console
*
* Parmeters:
* r1 = character
*
* Return
* R0 = 0
*
*************************************************************************/
#ifdef CONFIG_ARCH_LOWPUTC
_up_lowputc:
pushmlo <r1,r5> /* Save registers */
ld r0,r1
ext.ub r5,r0
cp r5,#10
jp ne, _up_lowputc1 /* If (character == \n) */
ld r1,#13
call _z16f_xmitc /* Call _z16f_xmitc with \r */
_up_lowputc1:
ld r1, r0
call _z16f_xmitc /* Xall _z16f_xmitc with character */
ld r0, #0 /* return r0 = 0 */
popmlo <r1,r5> /* Restore registers */
ret /* Return */
#endif
/*************************************************************************
* Name: _up_lowgetc
*
* Description:
* Get a character from the serial port
*
* Parmeters:
* None
*
* Return
* R0 = Character read
*
*************************************************************************/
#ifdef CONFIG_ARCH_LOWGETC
_up_lowgetc:
up_lowgetc1:
ld r0, #Z16F_UARTSTAT0_RDA /* RDA=Receive data available */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
tm.b Z16F_UART0_STAT0, r0
jp eq, _up_lowgetc1 /* While (!Z16F_UART0_STAT0 & RDA)) */
ld.ub r0, Z16F_UART0_RXD /* r0 = Z16F_UART0_RXD */
#else
tm.b Z16F_UART1_STAT0,r0 /* While (!Z16F_UART1_STAT0 & RDA) */
jp eq, _up_lowgetc1
ld.ub r0, Z16F_UART1_RXD /* r0 = Z16F_UART1_RXD */
#endif
cp r0, #%0d /* Test for '\r' */
jp eq, _up_lowgetc2
cp r0, #%0d /* Test \r + high bit */
jp ne, _up_lowgetc3
_up_lowgetc2:
ld r0, #%0a /* Convert '\r' to '\n' */
_up_lowgetc3: /* Return value in r0 */
ret /* Return */
#endif
#endif /* CONFIG_ARCH_LOWPUTC || CONFIG_ARCH_LOWGETC */
end
/*************************************************************************
* arch/z16/src/z16f/z16f_lowuart.asm
* Z16F UART management
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSeqUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*************************************************************************/
/*************************************************************************
* Included Files
*************************************************************************/
#include <nuttx/config.h>
#include "chip/chip.h"
#if defined(CONFIG_ARCH_LOWPUTC) || defined(CONFIG_ARCH_LOWGETC)
/*************************************************************************
* External References / External Definitions
*************************************************************************/
xdef z16f_lowuartinit
xref _SYS_CLK_FREQ:EROM
#ifdef CONFIG_ARCH_LOWPUTC
xdef _z16f_xmitc
xdef _up_lowputc
#endif
#ifdef CONFIG_ARCH_LOWGETC
xdef _up_lowgetc
#endif
/*************************************************************************
* Data Allocation
*************************************************************************/
define CODESEG, SPACE=EROM
segment CODESEG
/*************************************************************************
* Code
*************************************************************************/
/*************************************************************************
* Name: z16f_lowuartinit
*
* Description:
* Initialize UART0 or UART1
*
* Parameters:
* None
*
*************************************************************************/
z16f_lowuartinit:
pushmlo <r0, r3> /* Save registers */
/* Calculate and set the baud rate generation register */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
ld r3, #CONFIG_UART0_BAUD /* r3 = baud */
#else
ld r3, #CONFIG_UART1_BAUD /* r3 = baud */
#endif
ld r0, r3 /* r0 = baud */
sll r0, #3 /* r0 = baud * 8 */
add r0, #_SYS_CLK_FREQ /* r3 = freq + baud * 8*/
sll r3, #4 /* r3 = baud * 16 */
udiv r0, r3 /* BRG = (freq + baud * 8)/(baud * 16) */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
ld.w Z16F_UART0_BR, r0 /* Z16F_UART0_BR = BRG */
/* Set the GPIO Alternate Function Register Lo (AFL) register */
ld r0, #%30
or.b Z16F_GPIOA_AFL, r0 /* Z16F_GPIOA_AFL |= %30 */
/* Enable UART receive (REN) and transmit (TEN) */
clr.b Z16F_UART0_CTL1 /* Z16F_UART0_CTL1 = 0 */
ld r0, #(Z16F_UARTCTL0_TEN|Z16F_UARTCTL0_REN)
ld.b Z16F_UART0_CTL0, r0 /* Z16F_UART0_CTL0 = %c0 */
#else
ld.w Z16F_UART1_BR, r0 /* Z16F_UART1_BR = BRG */
/* Set the GPIO Alternate Function Register Lo (AFL) register */
ld r0, #%30
or.b Z16F_GPIOD_AFL, r0 /* Z16F_GPIOD_AFL |= %30 */
/* Enable UART receive (REN) and transmit (TEN) */
clr.b Z16F_UART1_CTL1 /* Z16F_UART1_CTL1 = 0 */
ld r0, #(Z16F_UARTCTL0_TEN|Z16F_UARTCTL0_REN)
ld.b Z16F_UART1_CTL0, r0 /* Z16F_UART1_CTL0 = %c0 */
#endif
popmlo <r0, r3> /* Restore registers */
ret /* Return */
/*************************************************************************
* Name: _z16f_xmitc
*
* Description:
* Send one character on the selected port
*
* Parmeters:
* r1 = character
*
*************************************************************************/
#ifdef CONFIG_ARCH_LOWPUTC
_z16f_xmitc:
pushmlo <r0> /* Save registers */
_z16f_xmitc1:
ld r0, Z16F_UARTSTAT0_TDRE /* TDRE=Transmitter Data Register Empty */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
tm.b Z16F_UART0_STAT0, r0 /* r0 = Z16F_UART0_STAT0 */
jp eq, _z16f_xmitc1 /* While (!(Z16F_UART0_STAT0 & TDRE)) */
ld.b Z16F_UART0_TXD, r1 /* Z16F_UART0_TXD = r1 (character) */
#else
tm.b Z16F_UART1_STAT0, r0 /* r0 = Z16F_UART0_STAT1 */
jp eq, _z16f_xmitc1 /* While (!(Z16F_UART1_STAT0 & TDRE)) */
ld.b Z16F_UART1_TXD, r1 /* Z16F_UART1_TXD = r1 (character) */
#endif
popmlo <r0> /* Restore registers */
ret /* Return */
#endif
/*************************************************************************
* Name: _up_lowputc
*
* Description:
* Send one character to the selected serial console
*
* Parmeters:
* r1 = character
*
* Return
* R0 = 0
*
*************************************************************************/
#ifdef CONFIG_ARCH_LOWPUTC
_up_lowputc:
pushmlo <r1,r5> /* Save registers */
ld r0, r1
ext.ub r5, r0
cp r5, #10
jp ne, _up_lowputc1 /* If (character == \n) */
ld r1,#13
call _z16f_xmitc /* Call _z16f_xmitc with \r */
_up_lowputc1:
ld r1, r0
call _z16f_xmitc /* Xall _z16f_xmitc with character */
ld r0, #0 /* return r0 = 0 */
popmlo <r1,r5> /* Restore registers */
ret /* Return */
#endif
/*************************************************************************
* Name: _up_lowgetc
*
* Description:
* Get a character from the serial port
*
* Parmeters:
* None
*
* Return
* R0 = Character read
*
*************************************************************************/
#ifdef CONFIG_ARCH_LOWGETC
_up_lowgetc:
up_lowgetc1:
ld r0, #Z16F_UARTSTAT0_RDA /* RDA=Receive data available */
#ifdef CONFIG_UART0_SERIAL_CONSOLE
tm.b Z16F_UART0_STAT0, r0
jp eq, _up_lowgetc1 /* While (!Z16F_UART0_STAT0 & RDA)) */
ld.ub r0, Z16F_UART0_RXD /* r0 = Z16F_UART0_RXD */
#else
tm.b Z16F_UART1_STAT0,r0 /* While (!Z16F_UART1_STAT0 & RDA) */
jp eq, _up_lowgetc1
ld.ub r0, Z16F_UART1_RXD /* r0 = Z16F_UART1_RXD */
#endif
cp r0, #%0d /* Test for '\r' */
jp eq, _up_lowgetc2
cp r0, #%0d /* Test \r + high bit */
jp ne, _up_lowgetc3
_up_lowgetc2:
ld r0, #%0a /* Convert '\r' to '\n' */
_up_lowgetc3: /* Return value in r0 */
ret /* Return */
#endif
#endif /* CONFIG_ARCH_LOWPUTC || CONFIG_ARCH_LOWGETC */
end
arch/z16/src/z16f/z16f_saveusercontext.S 0 → 100644
+ 104
− 0
View file @ ee1d8415
/*************************************************************************
* arch/z16/src/z16f/z16f_saveusercontext.asm
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSeqUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*************************************************************************/
/*************************************************************************
* Included Files
*************************************************************************/
#include <nuttx/config.h>
#include <arch/irq.h>
#include "chip/chip.h"
/*************************************************************************
* External References / External Definitions
*************************************************************************/
xdef up_saveusercontext
/*************************************************************************
* Data Allocation
*************************************************************************/
define CODESEG, SPACE=EROM
segment CODESEG
/*************************************************************************
* Code
*************************************************************************/
/*************************************************************************
* Name: up_saveusercontext
*
* Description:
* Save the current user context.
* r0-r7: These are caller saved registers and do not need to be stored
* here
* r8-r13: There callee saved registers must be preserved
* r14: Frame pointer
* r15: Stack pointer (with return address on stack)
*
* Parameters:
* r1: pointer to the register save array in the XCPT structure
*
*************************************************************************/
up_saveusercontext:
/* Save the flags (needed to restore the interrupt state) */
ld r3, Z16F_CNTRL_FLAGS /* Fetch the flags register */
sll r3, #8 /* Pad with zero */
ld 2*REG_FLAGS(r1), r3
/* Save r8-R13 */
ld 2*REG_R8(r1), r8 /* Save r8 */
ld 2*REG_R8(r1), r9 /* Save r9 */
ld 2*REG_R8(r1), r10 /* Save r10 */
ld 2*REG_R8(r1), r11 /* Save r11 */
ld 2*REG_R8(r1), r12 /* Save r12 */
ld 2*REG_R8(r1), r13 /* Save r13 */
/* Save the stack pointer and the frame pointer */
ld 2*REG_FP(r1), fp /* Save the frame pointer */
ld 2*REG_SP(r1), sp /* Save the stack pointer */
/* Save the return address at the top of the stack */
ld r0, (sp) /* Save the return address */
ld 2*REG_PC(r1), r0
clr r0 /* Always returns 0 */
ret
end
arch/z16/src/z16f/z16f_serial.c
+ 1
− 1
View file @ ee1d8415
......@@ -51,7 +51,7 @@
#include <nuttx/serial.h>
#include <arch/serial.h>
#include "up_arch.h"
#include "chip/chip.h"
#include "os_internal.h"
#include "up_internal.h"
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment