- Apr 30, 2018
-
-
Gregory Nutt authored
arch/arm/src/nrf52: Fix several inconsistencies in naming. Mostly cosmetic but one was causing a compiler warning.
-
Jake authored
-
Gregory Nutt authored
-
Gregory Nutt authored
-
- Apr 29, 2018
-
-
Gregory Nutt authored
include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies.
-
Shirshak Sengupta authored
arch/arm/src/tiva: Implemented Flash CONFIG_MTD_BYTE_WRITE for TM4c1294. Implemented the tiva_write function which will write an arbitrary number of bytes to flash (in multiple of 4).
-
Shirshak Sengupta authored
arch/arm/src/tiva: Implements an EEPROM driver in compliance with MTD driver as provided by NUTTX for TM4C1294. The EEPROM driver currently supports only two functionalities - read bytes(multiple of 4) and write bytes (multiple of 4). Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> Fix some spacing arch/arm/src/tiva: Verify that the EEPROM driver at least builds. arch/arm/src/tiva: Move unused function added to tm4c129_syscontrol.c to tiva_eeprom.c where it is actually used. arch/arm/src/tiva: Reorganize EEPROM register definitions so that the file organization is more like other platforms. arch/arm/src/tiva: Trying to resolve EEPROM register addressing. Still some issues. arch/arm/src/tiva: Ran uncrustify on tiva_eeprom.c arch/arm/src/tiva: EEPROM driver is a little closer to coding standard. Still a way to go. Author: Shirshak Sengupta <sgshirshak@gmail.com> arch/arm/src/tiva: Implemented EEPROM driver in compliance with MTD driver as provided by NUTTX for TM4C1294. The EEPROM driver needs to be initialized by calling the function tiva_EEPROMInit The EEPROM driver currently supports only two functionalities - read bytes(multiple of 4) and write bytes (multiple of 4). Note - Rest of the features of EEPROM will be implemented in the future.
-
Gregory Nutt authored
Makefile.unix: There is a sort command in the 'make savedefconfig' file. I found that sort behaves differently on different platforms based on the environment variable LC_ALL. Now, Makefile.unix will force LC_ALL=C just for the sort command so that we can all generate equivalent defconfig files.
-
- Apr 28, 2018
-
-
Alan Carvalho de Assis authored
-
Alan Carvalho de Assis authored
-
Dmitry Sharihin authored
-
David Sidrane authored
kinetis usb device fixes * kinetis:usb device use correct CONFIG OTG control * kinetis:usb device fix interrupt storm when cable is disconnected The DM, DP state were incorrect because the pulldowns were not enabled. Also the pending asynchronous resume interrupt needed to be re-armed after the suspend is in effect. This is now done in the isr. Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Gregory Nutt authored
-
- Apr 27, 2018
-
-
Jake authored
-
Gregory Nutt authored
fs/vfs and net/udp: Repartition logic of commit 0c963449, moving into net/udp. Add support to handle connected UDP sockets. The correct 'optimal blksize' to return is the MSS. The MTU is always too big.
-
Ivan Ucherdzhiev authored
-
Gregory Nutt authored
-
Alan Carvalho de Assis authored
-
Gregory Nutt authored
-
Gregory Nutt authored
net/udp: Correct an error introduce in recent fixes for UDP connected sockets. The interaction between psock_udp_send() and psock_udp_sendto() was perverse: It should always pass a NULL destinatino address.
-
- Apr 26, 2018
-
-
seyyah authored
-
Matt Thompson authored
This commit adds basic architectural support for the OpenRISK mor1kx architecture. The initial commit was verified on a Qemu simulation but is otherwise untested. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> Update README. configs/or1k: Should include header file file where exported functin is prototyped. arch/or1k/src: Eliminate some warnings. arch/or1k: Complete review Fix some recently introduced build issues configs/or1k/nsh: Convert to proper, compressed defconfig file. Another README update. Update README configs/or1k: Updates from initial review. Update README. Author: Matt Thompson <matt@extent3d.com> or1k: Added configurable CPU frequency to Kconfig. Calculate tick timer match period based on configured frequency. OpenRISC: Enable instruction and data cache OpenRISC: Initial support.
-
Gregory Nutt authored
configs/photon: Refresh all configurations. configurations the use the SDIO card interface must support CONFIG_STM32_SDIO_CARD.
-
Gregory Nutt authored
-
Gregory Nutt authored
-
hhuysqt authored
drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> include/nuttx/wireless/ieee80211: Cosmetic, coding standard changes from review of last merge. drivers/wireless/ieee80211: Cosmetic, coding standard changes from review of last merge. configs/photon: Cosmetic, coding standard changes from review of last merge. arch/arm/src/stm32: SDIO changes from last review: Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option. Author: hhuysqt <hyq9606@126.com> Return IEEE 802.11 MAC address just as ethernet does Modifyed bcmf_board_setup_oob_irq declaration Modified OOB ISR function types Add some logic according to WICED SDK Bug fixed: data_offset counts in 4-bytes Add BCM43438 logic for future developement Add tips on using telnet Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line... add SDIO in-band interrupt logic
-
Pelle Windestam authored
-
- Apr 25, 2018
-
-
Gregory Nutt authored
-
Gregory Nutt authored
arch/arm/src/imxrt: Minor reparitioning to account for the fact that the GPIO5 base address is not contiguous with the GPIO1-4 base addresses.
-
Gregory Nutt authored
include/nuttx/wireless: Add a setbaud() method to the HCI UART lower half interface that can be used to change the default BAUD selection. arch/arm/src/stm32: Implement the setbaud() method for the STM32 HCI UART.
-
Gregory Nutt authored
net/udp: Minor update from review of 091e3f73. In connect(), AF_UNSPEC is used to disconnect UDP socket. However, initial commit lacked logic to mark the socket as disconnected.
-
Gregory Nutt authored
net/udp: Fix several issues using connected UDP sockets: sendto() should not accept and address. Normally send() should be used instead. recvfrom() is no longer necessary. recvfrom() and poll() should not reset to accept any addresses but should, instead, only accept inputs and events from the connected remore peer. On of these issues was noted by 李桂丁 <liguiding@pinecone.net>. Changes were made as summarized here: http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch08lev1sec11.html
-
Gregory Nutt authored
tools/configure.sh: Fix last commit. If gmake is not present, then 'which gmake' spews a lot of annoying error messages when configuring. Best to pipe stderr to /dev/null so that we are blessedly unaware of the failures.
-
- Apr 24, 2018
-
-
Goran Mekić authored
Add clang support to stm32f746g-disco board Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Gregory Nutt authored
-
Juha Niskanen authored
drivers/1wire: add PM hooks and unlink support to sht21 sensor (allowing hot-swappable I2C bus from 1-wire converter) * drivers/1wire: add PM hook to 1wire bus * drivers/1wire/ds28e17.c: i2c instance must be zeroed * drivers/sht21: add unlink support Unlike most other unlink implementations in NuttX drivers, this one does not allow any I2C operations after unlink, making it possible to deallocate the I2C bus. Approved-by: Gregory Nutt <gnutt@nuttx.org>
-
Ivan Ucherdzhiev authored
-
Gregory Nutt authored
configs/stm32f4discovery/hciuart: Disable MMC/SD support. That made it difficult to re-use the configuration without the base board. MMC/SD support is not needed in that configuration anyway.
-
- Apr 23, 2018
-
-
Gregory Nutt authored
arch/arm/sc/lpc16xx: Extends commit 456a258c: Freeing endpoints should be set the same allocations as when endpoint was allocated.
-
- Apr 22, 2018
-
-
Gregory Nutt authored
-