Found via `codespell -q 3 -S *.po,*.ts,./share,./docs/man/es,./configs/attic,*_fr.*,*_es.* -L ans,ba,bulle,componentes,doubleclick,dout,dum,fo,halp,ihs,inout,parm,parms,ser,te,ue,wille,wont`

Setting DEBUG=3 on transactions produces a lot of useless debug information what makes it impossible to read the data bytes. That is now moved to DEBUG=4.

mb2hal: added int input to fnct_06_write_single_register and fnct_16_write_multiple_registers, updated doc

Tested with SAMSON 5578 / SAMSON SAM Home Gateway

Mainly truncation warnings, but a couple of others too.

Signed-off-by: andypugh <andy@bodgesoc.org>

* origin/2.7:
  fix some compiler warnings in libnml
  debian buster packaging: use correct package names for python imaging debs
  let debian/configure specify python-imaging and python-imaging-tk package names
  debian/configure: Debian-testing will become Debian-10
  packaging: don't depend on python-gnome2
  remove unused program halgui
  hy_gy_vfd: fix modbus byte timeout
  mb2hal: add support for libmodbus 3.1.2 and newer

This commit makes mb2hal build with both libmodbus < 3.1.2 (Debian
Stretch and older) and libmodbus >= 3.1.2 (Debian Buster).

When a communication error happens and a transaction is just partially
read the modbus link can get out of sync. The next transaction gets the
unconsumed data from the transaction before and so on and the link does
not recover form this. modbus_flush() prevents this behaviour.

Add fnct_06_write_single_register function as not all devices (e.g.
Parker AC10 VFD) support fnct_16_write_multiple_registers.

Conflicts:
	docs/man/man1/halstreamer.1
	lib/python/gladevcp/combi_dro.py
	src/emc/motion/command.c
	src/emc/task/emccanon.cc
	src/emc/usr_intf/emcrsh.cc
	src/emc/usr_intf/gmoccapy/getiniinfo.py
	src/hal/components/biquad.comp
	src/hal/components/orient.comp
	src/hal/components/streamer.c

If you write to 59 Temple Place you're unlikely to get a response.
Let's realign the address with a more up-to-date one from [1].

  [1] https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt



This is purely a cosmetic change, doesn't affect the meaning of the
license. Done to make rpmlint happy.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

The comminications threads could loop indefinitely without sleeping
while waiting for transactions to complete.
Added 1ms sleep.

Signed-off-by: Sebastian Kuzminsky <seb@highlab.com>

The PIN_NAMES option allows you to specify names for each individual
pin, instead of consecutive numbers

Signed-off-by: Sebastian Kuzminsky <seb@highlab.com>

Signed-off-by: Jeff Epler <jepler@unpythonic.net>

libmodbus version 3.1.2 introduced backwards incompatible API changes in
modbus_set_response_timeout and modbus_set_byte_timeout functions. This
patch adds conditional compilation to use the API appropriately based
upon the result of the LIBMODBUS_VERSION_CHECK macro.

Issue: https://github.com/LinuxCNC/linuxcnc/issues/105


Signed-off-by: Dale Lukas Peterson <hazelnusse@gmail.com>

The prior code uses questionable casts to do what can be done with
modulo integer math.

The new code does not give *exactly* the same timeout, because the
calculation
    (int)(float)(this_mb_tx->mb_response_timeout_ms / 1000.0)
is subject to rounding errors, while
    timeout.tv_sec  = this_mb_tx->mb_response_timeout_ms / 1000;
is not.  For example for a response timeout of 2001ms, the old code
would actually give a timeout of 2.000999 seconds, while the new code
gives the correct result of 2.001000 seconds.  The new code begins
giving "radically" different (but again more correct) values around
65536 seconds due to the loss of precision in float arithmetic
(65536.000f == 65536.001f when you have a 24-bit mantissa)

Tested by cut&paste of old and new code into a test harness:

struct timeval fold(long arg)
{
    struct timeval timeout;
    timeout.tv_sec  = (int)(float)(arg / 1000.0);  //int part of the float
    timeout.tv_usec = ((float)(arg / 1000.0) - timeout.tv_sec) * 1000000;
    return timeout;
}

struct timeval fnew(long arg)
{
    struct timeval timeout;
    timeout.tv_sec  = arg / 1000;
    timeout.tv_usec = (arg % 1000) * 1000;
    return timeout;
}

void check(long timeout) {
    struct timeval ta = fold(timeout);
    struct timeval tb = fnew(timeout);

    double a = ta.tv_sec + ta.tv_usec * 1e-6;
    double b = tb.tv_sec + tb.tv_usec * 1e-6;
    if(fabs(a - b) > .001) {
    // if(ta.tv_sec != tb.tv_sec || ta.tv_usec != tb.tv_usec) {
        printf("fail tv_sec %lu: %lu.%06lu != %lu.%06lu\n", timeout,
            (long) ta.tv_sec, (long) ta.tv_usec,
            (long) tb.tv_sec, (long) tb.tv_usec);
    }
}

int main() {
    long i;
    for(i=0; i<1000*1000*1000; i += 500) {
        check(i);
        check(i+1);
        check(i+499);
    }
}

By default, configure will now look for libmodbus (installed from a
separate deb, provided by Ubuntu for Precise and by the linuxcnc.org
debian archive for Hardy and Lucid) and error out if it can't be found.

The user can disable this check (and disable compilation of all drivers
that use libmodbus) by configuring with "--without-libmodbus".

- Arduino example added.
  Tested with Arduino Mega 2560 R3 using Modbusino over USB at 115200 bps.
- New parameters in config file.
  HAL_MODULE_NAME, MB_RESPONSE_TIMEOUT_MS and MB_BYTE_TIMEOUT_MS.
- New HAL pin "num_errors" for each transaction. num_errors = 0 if last
  transaction OK, else the count of failed transactions.
- Fix a bug, OPTIONAL's parameters may be 0 instead of default value if
  not specified in 1st transaction.

Signed-off-by: Michael Haberler <git@mah.priv.at>

- Mb2hal now uses libmodbus3 instead of the old libmodbus file
  located in src/hal/user_comps/modbus.c used by gs2_vfd.c
  # Also fix a TIMEOUT bug (due to this unpatched old libmodbus file).
- Better INI file documentation (HOW-TO).
- Better Submakefile.
- Source code cleaned and reordered.
  # Now is posible to add new functionallity.

See LogBook.txt for more information.

Signed-off-by: Michael Haberler <git@mah.priv.at>

Nothing big, two instances of dead initialization (so, a variable is
explicitly set at define-time, but then written to again before being read).

Signed-off-by: Sebastian Kuzminsky <seb@highlab.com>

This reverts commit ca835b429478324639df779e26005ca43b8917d1.

Victor says it is needed.

Userspace HAL component to communicate with one or
more Modbus devices.

Tests:
- TCP some functions = Remote IO Delta RTU-EN01,
  24 inputs, 8 outputs.
- RS232 some functions = Servo Drive Delta ASDA-B (1021-A 1Kw).
- TCP all functions = MoD_RsSim V8.20 (www.plcsimulator.org)
  on Windows XP SP3.

Signed-off-by: Michael Haberler <git@mah.priv.at>