Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
/************************************************************
* up_head.S
*
* Copyright (C) 2007 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name Gregory Nutt nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************/
/************************************************************
* Included Files
************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
#include "up_internal.h"
.module up_head
.optsdcc -mmcs51 --model-large
/************************************************************
* Private Data
************************************************************/
.area REG_BANK_0 (REL,OVR,DATA)
.ds 8
/************************************************************
* Public Data
************************************************************/
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
/************************************************************
* Public Functions
************************************************************/
.globl _irq_dispatch
/************************************************************
* Program entry points
************************************************************/
/* Program entry is through PROGRAM_BASE. This is just a
* branch to our start up logic.
*/
.area CODE1 (ABS)
.org PROGRAM_BASE
ljmp start
/* These are indirect interrupt vectors. Logic in PAULMON2,
* captures the interrupt vectors (near address 0x0000) and
* re-routes them through the following entry points.
*
* Each of these saves acc and ie then passes the IRQ number
* to higher level logic in a
*/
.org PM2_VECTOR_EXTINT0
push acc
mov a, #EXT_INT0_IRQ
ljmp _up_interrupt
.org PM2_VECTOR_TIMER0
push acc
mov a, #TIMER0_IRQ
ljmp _up_interrupt
.org PM2_VECTOR_EXTINT1
push acc
mov a, #EXT_INT1_IRQ
ljmp _up_interrupt
.org PM2_VECTOR_TIMER1
push acc
mov a, #TIMER1_IRQ
ljmp _up_interrupt
.org PM2_VECTOR_UART
push acc
mov a, #UART_IRQ
ljmp _up_interrupt
.org PM2_VECTOR_TIMER2
push acc
mov a, #TIMER2_IRQ
ljmp _up_interrupt
/************************************************************
* Name: start
*
* Description:
* This is the initial entry point into NuttX
*
************************************************************/
start:
mov sp, #(STACK_BASE-1)
#ifdef CONFIG_8051_LEDS
lcall _up_ledinit
#endif
ljmp _os_start
/************************************************************
* Name: up_interrupt
*
* Description:
* All interrupts vector to this point with:
*
* (2) the IRQ number in the accumulator
*
************************************************************/
_up_interrupt:
ar2 = 0x02
ar3 = 0x03
ar4 = 0x04
ar5 = 0x05
ar6 = 0x06
ar7 = 0x07
ar0 = 0x00
ar1 = 0x01
/* ACC already on the stack; push IE. Then disable interrupts */
push ie
clr ea
/* Now push the remaining registers with interrupt disabled */
push dpl
push dph
push b
push ar2
push ar3
push ar4
push ar5
push ar6
push ar7
push ar0
push ar1
push psw
clr psw
push _bp
#ifdef CONFIG_8051_LEDS
push acc
mov dpl, #LED_INIRQ
lcall _up_ledon
pop ar2
#else
#endif
/* Mark that we are in an interrupt and provide the top
* of stack pointer to the context switching logic.
*/
mov dptr, #_g_irqtos
movx @dptr, a
/* Nullify the context pointer. If a context switch is
* needed, this will be set to the address of the context
* structure.
*/
mov dptr,#_g_irqcontext
clr a
movx @dptr,a
inc dptr
movx @dptr,a
/* Now call void irq_dispatch(int irq, FAR void *context)
*
* First, create the first argument as (int)irqno
*/
/* Create the second argument (void *context) on the stack */
push sp
clr a
push acc
/* Indicate that we are no longer in an interrupt */
mov dptr, #_g_irqtos
clr a
movx @dptr, a
/* Check if a context switch is pending */
mov dptr,#_g_irqcontext
mov r2, a
inc dptr
movx a, @dptr
mov r3, a
/* A context switch is pending, clear g_irqcontext */
clr a
movx @dptr, a
inc dptr
movx @dptr, a
#ifdef CONFIG_INTERRUPT_FRAME_DUMP
mov dpl, r2
mov dph, r3
push ar2
push ar3
lcall _up_dumpframe
pop ar3
pop ar2
#endif
/* Register usage in the following:
*
* R0 - Holds working the 8-bit IRAM pointer
* R1 - Not used
* R2-3 - Holds the working 16-bit XRAM pointer
* R4 - Holds the working byte count
* R5 - Holds the new stack pointer
* R6-7 - Not used
*/
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
mov dpl, r2
mov dph, r3
movx a, @dptr
mov r4, a
/* Save the new stack pointer in r5 */
add a, #(STACK_BASE-1)
mov r5, a
/* Save r2-3 = &context->stack */
inc dptr
mov r2, dpl
mov r3, dph
/* Set r0 = stack base address */
mov r0, #STACK_BASE
/* Top of the copy loop */
00001$:
dec r4
jz 00002$
/* Fetch the next byte from context->stack */
mov dpl, r2
mov dph, r3
movx a,@dptr
/* Increment the XRAM pointer */
inc dptr
mov r2, dpl
mov r3, dph
/* Save the next byte into IRAM */
mov @r0, a
/* Increment the IRAM pointer */
inc r0
sjmp 00001$
/* Set the new stack pointer */
00002$:
mov sp, r5
#ifdef CONFIG_INTERRUPT_FRAME_DUMP
lcall _up_dumpstack
#endif
/* Then restore the context from the stack and return
* from the interrupt
*/
00003$:
#ifdef CONFIG_8051_LEDS
mov dpl, #LED_INIRQ
lcall _up_ledoff
#endif
pop _bp
pop psw
pop ar1
pop ar0
pop ar7
pop ar6
pop ar5
pop ar4
pop ar3
pop ar2
pop b
pop dph
pop dpl